Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.     

Jovian temperature and cloud variability during the 2009-2010 fade of the South Equatorial Belt

Mid-infrared 7-20 μm imaging of Jupiter from ESO’s Very Large Telescope (VLT/VISIR) demonstrate that the increased albedo of Jupiter’s South Equatorial Belt (SEB) during the ‘fade’ (whitening) event of 2009-2010 was correlated with changes to atmospheric temperature and aerosol opacity. The opacity of the tropospheric condensation cloud deck at pressures less than 800 mbar increased by 80% between May 2008 and July 2010, making the SEB (7-17°S) as opaque in the thermal infrared as the adjacent equatorial zone. After the cessation of discrete convective activity within the SEB in May 2009, a cool band of high aerosol opacity (the SEB zone at 11-15°S) was observed separating the cloud-free northern and southern SEB components. The cooling of the SEBZ (with peak-to-peak contrasts of 1.0 ± 0.5 K), as well as the increased aerosol opacity at 4.8 and 8.6 μm, preceded the visible whitening of the belt by several months. A chain of five warm, cloud-free ‘brown barges’ (subsiding airmasses) were observed regularly in the SEB between June 2009 and June 2010, by which time they too had been obscured by the enhanced aerosol opacity of the SEB, although the underlying warm circulation was still present in July 2010. Upper tropospheric temperatures (150-300 mbar) remained largely unchanged during the fade, but the cool SEBZ formation was detected at deeper levels (p > 300 mbar) within the convectively-unstable region of the troposphere. The SEBZ formation caused the meridional temperature gradient of the SEB to decrease between 2008 and 2010, reducing the vertical thermal windshear on the zonal jets bounding the SEB. The southern SEB had fully faded by July 2010 and was characterised by short-wave undulations at 19-20°S. The northern SEB persisted as a narrow grey lane of cloud-free conditions throughout the fade process.The cool temperatures and enhanced aerosol opacity of the SEBZ after July 2009 are consistent with an upward flux of volatiles (e.g., ammonia-laden air) and enhanced condensation, obscuring the blue-absorbing chromophore and whitening the SEB by April 2010. These changes occurred within cloud decks in the convective troposphere, and not in the radiatively-controlled upper troposphere. NH₃ ice coatings on aerosols at p < 800 mbar are plausible sources of the suppressed 4.8 and 8.6-μm emission, although differences in the spatial distribution of opacity at these two wavelengths suggest that enhanced attenuation by a deeper cloud (p > 800 mbar) also occurred during the fade. Revival of the dark SEB coloration in the coming months will ultimately require sublimation of these ices by subsidence and warming of volatile-depleted air.     

Electron Temperatures and Flow Speeds of the Low Solar Corona: MACS Results from the Total Solar Eclipse of 29 March 2006 in Libya

An experiment was conducted in conjunction with the total solar eclipse on 29 March 2006 in Libya to measure both the electron temperature and its flow speed simultaneously at multiple locations in the low solar corona by measuring the visible K-coronal spectrum. Coronal model spectra incorporating the effects of electron temperature and its flow speed were matched with the measured K-coronal spectra to interpret the observations. Results show electron temperatures of (1.10±0.05) MK, (0.70±0.08) MK, and (0.98±0.12) MK, at 1.1 R _⊙ from Sun center in the solar north, east and west, respectively, and (0.93±0.12) MK, at 1.2 R _⊙ from Sun center in the solar west. The corresponding outflow speeds obtained from the spectral fit are (103±92) km s⁻¹, (0+10) km s⁻¹, (0+10) km s⁻¹, and (0+10) km s⁻¹. Since the observations were taken only at 1.1 R _⊙ and 1.2 R _⊙ from Sun center, these speeds, consistent with zero outflow, are in agreement with expectations and provide additional confirmation that the spectral fitting method is working. The electron temperature at 1.1 R _⊙ from Sun center is larger at the north (polar region) than the east and west (equatorial region).     

Possible liquid water origin for Atacama Desert mudflow and recent gully deposits on Mars

Evidence of recent gully activity on Mars has been reported based on the formation of new light toned deposits within the past decade, the origin of which remains controversial. Analogous recent light toned gully features have formed by liquid water activity in the Atacama Desert on Earth. These terrestrial deposits leave no mineralogical trace of water activity but rather show an albedo difference due to particle size sorting within a fine-grained mudflow. Therefore, spectral differences indicating varying mineralogy between a recent gully deposit and the surrounding terrain may not be the most relevant criteria for detecting water flow in arid environments. Instead, variation in particle size between the deposit and surrounding terrain is a possible discriminator to identify a water-based flow. We show that the Atacama deposit is similar to the observed Mars gully deposits, and both are consistent with liquid water activity. The light-toned Mars gully deposits could have formed from dry debris flows, but a liquid water origin cannot be ruled out because not all liquid water flows leave hydrated minerals behind on the surface. Therefore, the Mars deposits could be remnant mudflows that formed on Mars within the last decade.     

Sea-level and reef accretion history of Marine Oxygen Isotope Stage 7 and late Stage 5 based on age and facies of submerged late Pleistocene reefs,Oahu, Hawaii

In situ Pleistocene reefs form a gently sloping nearshore terrace around the island of Oahu. TIMS Th–U ages of in situ corals indicate that most of the terrace is composed of reefal limestones correlating to Marine Oxygen Isotope Stage 7 (MIS 7, ~ 190–245 ka). The position of the in situ MIS 7 reef complex indicates that it formed during periods when local sea level was ~ 9 to 20 m below present sea level. Its extensiveness and geomorphic prominence as well as a paucity of emergent in situ MIS 7 reef-framework deposits on Oahu suggest that much of MIS 7 was characterized by regional sea levels below present. Later accretion along the seaward front of the terrace occurred during the latter part of MIS 5 (i.e., MIS 5a–5d, ~ 76–113 ka). The position of the late MIS 5 reefal limestones is consistent with formation during a period when local sea level was below present. The extensiveness of the submerged Pleistocene reefs around Oahu compared to the relative dearth of Holocene accretion is due to the fact that Pleistocene reefs had both more time and more accommodation space available for accretion than their Holocene counterparts.     

A two‐dimensional model of hydraulic performance of stormwater infiltration systems

Stormwater infiltration systems are a popular method for urban stormwater control. They are often designed using an assumption of one‐dimensional saturated outflow, although this is not very accurate for many typical designs where two‐dimensional (2D) flows into unsaturated soils occur. Available 2D variably saturated flow models are not commonly used for design because of their complexity and difficulties with the required boundary conditions. A purpose‐built stormwater infiltration system model was thus developed for the simulation of 2D flow from a porous storage. The model combines a soil moisture–based model for unsaturated soils with a ponded storage model and uses a wetting front‐tracking approach for saturated flows. The model represents the main physical processes while minimizing input data requirements. The model was calibrated and validated using data from laboratory 2D stormwater infiltration trench experiments. Calibrations were undertaken using five different combinations of calibration data to examine calibration data requirements. It was found that storage water levels could be satisfactorily predicted using parameters calibrated with either data from laboratory soils tests or observed water level data, whereas the prediction of soil moistures was improved through the addition of observed soil moisture data to the calibration data set. Copyright © 2012 John Wiley & Sons, Ltd.     

EXPLORING SPATIAL FAMILIARITY*

Spatial familiarity is a natural language concept that has no well-defined technical interpretation. We explore here some possible dimensions of the concept, provide subjective measurements of the dimensions, and evaluate their independence. The four dimensions examined are locational knowledge, visual recognition, name identification, and interaction frequency. We suggest that both cognitive and behavioral dimensions are embedded in the concept of spatial familiarity and must be part of the meaning of the concept and of any attempt to make it operational.     

Exoplanet atmospheres with EChO: spectral retrievals using EChOSim

We demonstrate the effectiveness of the Exoplanet Characterisation Observatory mission concept for constraining the atmospheric properties of hot and warm gas giants and super Earths. Synthetic primary and secondary transit spectra for a range of planets are passed through EChOSim [13] to obtain the expected level of noise for different observational scenarios; these are then used as inputs for the NEMESIS atmospheric retrieval code and the retrieved atmospheric properties (temperature structure, composition and cloud properties) compared with the known input values, following the method of [1]. To correctly retrieve the temperature structure and composition of the atmosphere to within 2 σ, we find that we require: a single transit or eclipse of a hot Jupiter orbiting a sun-like (G2) star at 35 pc to constrain the terminator and dayside atmospheres; 20 transits or eclipses of a warm Jupiter orbiting a similar star; 10 transits/eclipses of a hot Neptune orbiting an M dwarf at 6 pc; and 30 transits or eclipses of a GJ1214b-like planet.     

Assessing vulnerability due to sea-level rise in Maui, Hawai‘i using LiDAR remote sensing and GIS

Sea-level rise (SLR) threatens islands and coastal communities due to vulnerable infrastructure and populations concentrated in low-lying areas. LiDAR (Light Detection and Ranging) data were used to produce high-resolution DEMs (Digital Elevation Model) for Kahului and Lahaina, Maui, to assess the potential impacts of future SLR. Two existing LiDAR datasets from USACE (U.S. Army Corps of Engineers) and NOAA (National Oceanic and Atmospheric Administration) were compared and calibrated using the Kahului Harbor tide station. Using tidal benchmarks is a valuable approach for referencing LiDAR in areas lacking an established vertical datum, such as in Hawai‘i and other Pacific Islands. Exploratory analysis of the USACE LiDAR ground returns (point data classified as ground after the removal of vegetation and buildings) indicated that another round of filtering could reduce commission errors. Two SLR scenarios of 0.75 (best-case) to 1.9 m (worst-case) (Vermeer and Rahmstorf Proc Natl Acad Sci 106:21527–21532, 2009) were considered, and the DEMs were used to identify areas vulnerable to flooding. Our results indicate that if no adaptive strategies are taken, a loss ranging from $18.7 million under the best-case SLR scenario to $296 million under the worst-case SLR scenario for Hydrologically Connected (HC; marine inundation) and Hydrologically Disconnected (HD; drainage problems due to a higher water table) areas combined is possible for Kahului; a loss ranging from $57.5 million under the best-case SLR scenario to $394 million under the worst-case SLR scenario for HC and HD areas combined is possible for Lahaina towards the end of the century. This loss would be attributable to inundation between 0.55 km² to 2.13 km² of area for Kahului, and 0.04 km² to 0.37 km² of area for Lahaina.     

Comparison of the Energy Spectra and Number Fluxes From a simple Flare Model to Observations

In this paper, we investigate the energy spectra produced by a simple test particle X-point model of a solar flare for different configurations of the initial electromagnetic field. We find that once the reconnection electric field is larger than 1 Vm^-1 the particle distribution transits from a heated one to a partially accelerated one. As we close the separatrices of the X-point and the angle in the inflow direction widens we find that more particles are accelerated out of the thermal distribution and this power–law component extends to lower energies. When we introduce a guiding magnetic field component we find that more particles are energised, but only up to a maximum energy dictated primarily by the reconnection electric field. Despite being able to accelerate particles to observable energies and demonstrate behaviour in the energy spectra that is consistent with observations, this single X-line model can only deliver the number fluxes required for microflares.