SHRIMP U–Pb ages of diagenetic and hydrothermal xenotime from the Archaean Witwatersrand Supergroup of South Africa

SHRIMP dating of xenotime overgrowths on detrital zircon grains can constrain maximum durations since diagenesis and therefore provide minimum dates of sediment deposition. Thus, xenotime dating has significant economic application to Precambrian sediment-hosted ore deposits, such as Witwatersrand Au–U, for which there are no precise depositional ages. The growth history of xenotime in the Witwatersrand Supergroup is texturally complex, with several phases evident. The oldest authigenic xenotime ²⁰⁷Pb/²⁰⁶Pb age obtained in sandstone underlying the Vaal Reef is 2764 ± 5 Myr (1 σ), and most likely represents a mixture of diagenetic and hydrothermal growth. Nevertheless, this represents the oldest authigenic mineral age yet recorded in the sequence and provides a minimum age of deposition. Other xenotime data record a spread of ages that correspond to numerous post-diagenetic thermotectonic events (including a Ventersdorp event at ≈ 2720 Ma) up to the ≈2020 Ma Vredefort event.     

香港大都市规划:前店的规划

香港和内地在劳动地域分工上被称为“前店后厂”模式。文章回顾了二战以后香港社会经济发展和规划的历史,通过香港大都市规划方案,展望未来,重点研究了分散的空间发展战略规划的原因,并从政治经济的角度进行解释和对比,认为跨界发展的大都市规划是实现香港空间合理化的一种战略。     

Variation in Coronal Activity from Solar Cycle 24 Minimum to Maximum Using Three-Dimensional Reconstructions of the Coronal Electron Density from STEREO/COR1

Three-dimensional electron density distributions in the solar corona are reconstructed for 100 Carrington rotations (CR 2054?–?2153) during 2007/03?–?2014/08 using the spherically symmetric method from polarized white-light observations with the inner coronagraph (COR1) onboard the twin Solar Terrestrial Relations Observatory (STEREO). These three-dimensional electron density distributions are validated by comparison with similar density models derived using other methods such as tomography and a magnetohydrodynamics (MHD) model as well as using data from the Solar and Heliospheric Observatory (SOHO)/Large Angle and Spectrometric Coronagraph (LASCO)-C2. Uncertainties in the estimated total mass of the global corona are analyzed based on differences between the density distributions for COR1-A and -B. Long-term variations of coronal activity in terms of the global and hemispheric average electron densities (equivalent to the total coronal mass) reveal a hemispheric asymmetry during the rising phase of Solar Cycle 24, with the northern hemisphere leading the southern hemisphere by a phase shift of 7?–?9 months. Using 14 CR (\(\approx13\)-month) running averages, the amplitudes of the variation in average electron density between Cycle 24 maximum and Cycle 23/24 minimum (called the modulation factors) are found to be in the range of 1.6?–?4.3. These modulation factors are latitudinally dependent, being largest in polar regions and smallest in the equatorial region. These modulation factors also show a hemispheric asymmetry: they are somewhat larger in the southern hemisphere. The wavelet analysis shows that the short-term quasi-periodic oscillations during the rising and maximum phases of Cycle 24 have a dominant period of 7?–?8 months. In addition, it is found that the radial distribution of the mean electron density for streamers at Cycle 24 maximum is only slightly larger (by \(\approx30\%\)) than at cycle minimum.     

Individual responsibility for the oceans? An evaluation of marine citizenship by UK marine practitioners

In recent times, the governance of the marine environment has evolved from being primarily top down and state directed to being more participatory and community based. This paper proposes that an extension of this trend would be the inculcation of a societal sense of marine citizenship to deliver the sustainable management and protection of the marine environment through enhanced individual involvement in policy development and implementation. The potential role of marine citizenship in UK marine governance was examined by surveying UK marine practitioner’s views on both the current and future role of marine citizenship. Observations from this study identified three key factors for discussion including conflicting opinions over the implementation of marine citizenship into policy; that marine-focused education and a sense of personal attachment are integral to the development of marine citizenship; and that as yet, the potential implications of an enhanced sense of marine citizenship are uncertain. This research highlights the recognition amongst marine practitioners that higher levels of citizen involvement in the management of the marine environment would greatly benefit the marine environment, with additional benefits possible through an increased sense of marine citizenship.     

SHRIMP U–Pb geochronology of authigenic xenotime and its potential for dating sedimentary basins

SHRIMP (Sensitive High‐Resolution Ion MicroProbe) analytical procedures have been developed to enable dating of the small, early diagenetic xenotime overgrowths that commonly occur on zircons in siliciclastic sedimentary rocks. The method will be particularly useful in Precambrian terranes, where diagenetic xenotime dating could play a role equivalent to biostratigraphic dating in the Phanerozoic. Reliable ²⁰⁷Pb/²⁰⁶Pb data are more readily obtained than ²⁰⁶Pb/²³⁸U, which also favours application to the Precambrian. However, it is demonstrated that ²⁰⁶Pb/²³⁸U dating of larger overgrowths (>10 μm) is also viable and applicable to Phanerozoic samples. SHRIMP Pb/Pb geochronology of authigenic xenotime in an unmetamorphosed Palaeoproterozoic sandstone in the Kimberley Basin has constrained diagenesis to a precision of ± 7 Ma. In contrast, greenschist‐facies metasediments of the Archaean Witwatersrand Basin, South Africa, contain both authigenic and alteration xenotime that record a complex history of growth from early diagenesis to the last major thermal event to affect the basin.     

Elimination of hydraulic effects for cassiterite in a Malaysian Stream

Geochemical patterns for elements, such as Sn, W and Au, present in drainage sediments as resistate heavy minerals are often erratic and difficult to interpret. To investigate the source of these problems and develop methods of eliminating them we have compared the behavior of Sn, present as cassiterite, and associated pathfinder elements downstream from a small primary Sn deposit in Perak, Peninsular Malaysia.Dispersion trains for the pathfinder elements are characterized by smooth decay patterns and differences in concentrations between high- and low-energy environments, characterized by coarse-and medium-grained sands respectively, are not significant. In contrast, Sn (and magnetite) concentrations are extremely erratic with significantly higher concentrations in high- compared to low-energy environments. As a result the dispersion train for Sn exhibits no regular decay pattern away from its source. These findings suggest that the action of the stream is analogous to that of sluice box, with light minerals being winnowed away and cassiterite, together with magnetite, accumulating. For all but the finest sizes this process, which is most efficient in high-energy environments, causes considerable local variability in Sn content of the sediments. However, because the hydraulic behavior of cassiterite and magnetite is similar, but magnetite is not associated with the primary mineralization, the Sn/magnetite ratio can be used to eliminate Sn anomalies resulting from local variations in hydraulic conditions.The concept of hydraulic equivalence of cassiterite and magnetite was extended to examining the relationship between Sn and different size fractions of the light minerals that constitute the bulk of most sediments. Greatest contrast is obtained when the Sn content of the −270 mesh (−53 μm) fraction is re-expressed as its hydraulic equivalent concentration in −65 + 100 mesh (−212 + 150 μm) material.For exploration purposes it is concluded that: (1) providing cassiterite is present in the fine size fractions, sampling of this material will reduce hydraulic effects, thereby reducing data variability, and can also increase the length of the anomalous dispersion train; and (2) hydraulic effects can also be reduced by re-expressing Sn concentrations as ratios to magnetite (provided this is not associated with the primary Sn mineralization) or a hydraulically equivalent size fraction of the light minerals that constitute the bulk of the sediment. Similar principles probably apply to the interpretation of geochemical data for other elements dispersed in drainage sediments as heavy minerals; this warrants further investigation.     

Lithogeochemistry of hypogene, supergene and leached cap samples, berg porphyry copper deposit, British Columbia

In this paper we examine the influence of the development of supergene oxide and sulphide zones on the original hypogene geochemical patterns at the Berg deposit, British Columbia.The deposit, in the alpine zone of the Tahtsa Range, was logged (GEOLOG) and sampled in fourteen diamond drill holes along a N—S section and from outcrop where possible. Anomalous populations of major and trace elements were defined using log probability graphs and a sequential extraction (10% hydrochloric acid— ammonium oxalate — potassium chlorate/hydrochloric acid — nitric/perchloric acids) was used to study the distribution of elements between carbonate, oxide, sulphide and silicate phases.Core logs and assays show that primary ore minerals (chalcopyrite—molybdenite) extend from the outer part of the porphyry intrusion into the surrounding hornfels where the best grades of copper are found close to the intrusive contact. Maximum copper grades, however, result from development of a supergene enrichment blanket. Within the hypogene zone, principal lithogeochemical patterns reflect the differences in composition of the hornfels, originally intermediate to basic volcanics, and the intrusion, as well as the introduction of F and trace metals (Cu, Mo, Pb, Zn and Ag). Distribution of Ag is broadly comparable to that of Cu and Mo whereas anomalous Pb and Zn are present as peripheral haloes around the potential ore zones.Emergence of strongly acidic ground water and precipitation of iron oxides, indicate that leaching processes are active. Furthermore, although primary sulphides, associated with both their oxidation products and secondary sulphides, can still be found in surface samples, sequential extractions on drill core clearly indicate vertical redistribution of copper between oxide, carbonate and sulphide phases. Using ratios of metal concentrations to TiO₂, the surface concentrations of trace metals can be compared with those at depth and the relative amount of enrichment or depletion can be quantified. In highly leached sites the absolute concentrations of Cu, Mn and Zn are low which is reflected in TiO₂ ratios of <1. However, Mo, Pb and Ag are enriched at the same sites (TiO₂ ratios >1). In areas where physical erosion exceeds leaching (topographic lows) primary sulphides co-exist with secondary sulphide and oxide minerals. Here Cu, Mo, Pb, Zn, Mn and Ag are enriched. Fluorine is relatively unaffected by the leaching process. It would appear signature for a cale alkaline Cu and Mo porphyry deposit in an area where outcrop was intensely leached.     

A determination of source properties of large intraplate earthquakes in Alaska

Historically, large and potentially hazardous earthquakes have occurred within the interior of Alaska. However, most have not been adequately studied using modern methods of waveform modeling. The 22 July 1937, 16 October 1947, and 7 April 1958 earthquakes are three of the largest events known to have occurred within central Alaska (M _s =7.3,M _s =7.2 andM _s =7.3, respectively). We analyzed teleseismic body waves to gain information about the focal parameters of these events. In order to deconvolve the source time functions from teleseismic records, we first attempted to improve upon the published focal mechanisms for each event. Synthetic seismograms were computed for different source parameters, using the reflectivity method. A search was completed which compared the hand-digitized data with a suite of synthetic traces covering the complete parameter space of strike, dip, and slip direction. In this way, the focal mechanism showing the maximum correlation between the observed and calculated traces was found. Source time functions, i.e., the moment release as a function of time, were then deconvolved from teleseismic records for the three historical earthquakes, using the focal mechanisms which best fit the data. From these deconvolutions, we also recovered the depth of the events and their seismic moments. The earthquakes were all found to have a shallow foci, with depths of less than 10 km.The 1937 earthquake occurred within a northeast-southwest band of seismicity termed the Salcha seismic zone (SSZ). We confirm the previously published focal mechanism, indicating strike-slip faulting, with one focal plane parallel to the SSZ which was interpreted as the fault plane. Assuming a unilateral fault model and a reasonable rupture velocity of between 2 and 3 km/s, the 21 second rupture duration for this event indicates that all of the 65 km long SSZ may have ruptured during this event. The 1947 event, located to the south of the northwest-southeast trending Fairbanks seismic zone, was found to have a duration of about 11 seconds, thus indicating a rupture length of up to 30 km. The rupture duration of the 1958 earthquake, which occurred near the town of Huslia, approximately 400 km ENE of Fairbanks, was found to be about 9 seconds. This gives a rupture length consistent with the observed damage, an area of 16 km by 64 km.