The effect of gradient and curvature drifts on Forbush decreases

The average profile of Forbush decreases, produced by eastern-, central- and western-region solar flares is obtained separately by superposed epoch analysis for the periods 1966–1969 (qA < 0) and 1971–1979 (qA > 0). It is observed that the recovery of an average Forbush decrease from the maximum depression level is faster for the situation qA > 0 than for the situation qA < 0. This is in accordance with expectations from the drift theory. It is also observed that the drift effect is more pronounced for western-flare Forbush decreases which, of course, have a smaller magnitude compared to eastern- and central-flare Forbush decreases.The average profiles of simple and complex type Forbush decreases are also obtained separately for three periods 1965–1979, 1971–1979, and 1981–1987. It is found that the average profiles of simple and complex type Forbush decreases observed during the period 1965–1969 and 1971– 1979 are quite in agreement with drift theory. The anomalous behavior of average Forbush-decrease profiles during the period 1981–1987, especially in simple type Forbush decreases, is also explained by a drift current sheet tilt model.     

Pressure distribution phenomena over a wedge and sphere surface in uniform flow

In this paper, experimentally the pressure distribution over wedge and sphere surface in uniform flow has been investigated. Fluid flow over a smooth wedge surface was investigated experimentally to determine the pressure distribution at different values of Reynolds numbers and wedge angles as well as pressure distributions around the sphere of different size are reported for different Reynolds numbers. The variation of static pressures is larger near the wedge vertex and gradually decreases along the length of the wedge surface. At the forward stagnation point the pressure distribution depends on the size of spheres. Separation of flow takes place at an angle of 78° from forward stagnation point for all sizes of spheres. At the rear stagnation point of the sphere the pressure distribution predicts negative pressures. Experimental results provide useful information of interest to potential industrial application. It helps in determining the shape of various wedge and sphere surfaces used in industries for cooling or heating of different wedge surfaces. In the present experiment, it has been found that the pressure near vertex lower as the included angle of the wedge decreases and at lower values of Reynolds number.     

Influence of strong motion characteristics on permanent displacement of slopes

Landslides triggered by moderate to major earthquakes are a recognized seismic hazard. Arias Intensity (I _a) is a key intensity measure of the ground motion, but significant duration is widely used to define strong motion duration. We calculate Newmark’s displacements using earthquake records bracketing a broad range of Arias Intensity and significant duration employing Newmark’s rigid block method and a number of yield accelerations. Total landslide displacement increases with the increase in the energy content of the ground motion (I _a) above a threshold. Such threshold may be expressed as a function of yield acceleration of the slope regardless of the ground motion characteristics. Newmark displacement decreases with increasing duration for earthquakes with similar energy content. The wide scatter in the results converges when using formal dimensional analysis. Self-similar symmetry may facilitate the assessment of the performance of slopes during earthquakes. The mathematical framework for probabilistic determination of landslides displacement may be a useful aid to estimate the likelihood of landslide hazards provided that the geotechnical properties of the slopes are known.     

Contrasting regional and global climate simulations over South Asia

Climate Dynamics - Two ensembles of climate simulations, one global and one regional, are used to investigate model errors and projected climate change in seasonal mean temperature and...     

A model for predicting actual evapotranspiration under soil water stress in a Mediterranean region

Summary In this paper a model for estimating actual evapotranspiration is developed and tested for field crops (grain sorghum and sunflower) maintained under water stress conditions. The model is based on the Penman-Monteith formulation of ET in which canopy resistance (r _c) is modeled with respect to the crop water status and local climatological conditions. The model was previously tested on reference grass; in this last case no reference was made to soil water conditions andr _c was modeled only as a function of climatological parameters. Herer _c is expressed as a function of available energy, vapour pressure deficit, aerodynamic resistance and crop water status by means of predawn leaf water potential. Results, obtained with various crop water stress intensities, show that, on a daily scale, calculated ET is 98% and 95% of the measured ET for sorghum and sunflower respectively. The correlation between daily calculated and measured ET is very high (r ² = 0.95 for sorghum andr ² = 0.98 for sunflower). On an hourly scale, the model works very well when the crops were not stressed and during the senescence stage. In case of weak and strong stress the model has to be used with some precautions.With 9 Figures     

Evapotranspiration and canopy resistance of grass in a Mediterranean region

Summary A simple method for estimating actual evapotranspiration (ET) could become a suitable tool for irrigation scheduling. Resistance models can be useful if data on canopy resistance to water vapor flow (rc) and on aerodynamic resistance (ra) are available. These parameters are complex and hard to obtain. In this studyrc is analysed for a reference crop (grass meadow). Canopy resistance is dependent on climate, weather (radiation, atmospheric vapor pressure deficit, aerodynamic resistance), agronomic practices (irrigation, grass cutting) and time scale (hour, day). Anrc model, proposed by Katerji and Perrier (KP model), using some meteorological parameters as inputs, is presented. Canopy resistance calculated according to the KP model was used to estimate a referenceET _ref on hourly and daily time scales.TheET _ref estimated using the KP model on a daily time scale was compared with a model proposed by Allen, Jensen, Wright and Burman (AJWB model) — in whichrc depends on leaf area index only — and with direct measurements from a weighing lysimeter. The results show an underestimation of 18% for the AJWB model against an underestimation of 2% for the KP model. Since the hypotheses are the same for both models and aerodynamic resistance plays a secondary role, the better results obtained by the KP model are due torc modelling.With 11 Figures     

A Measurement Based Sensitivity Analysis of the Penman-Monteith Actual Evapotranspiration Model for Crops of Different Height and in Contrasting Water Status

Summary This paper presents a study of the sensibility of the Penman-Monteith evapotranspiration model to climatic (available energy and vapour pressure deficit) and parametric (aerodynamic and canopy resistances, r _a and r _c respectively) factors in a semi-arid climate, for crops in contrasting water status (well irrigated and under water stress) and of different heights. Three experiments were carried out in southern Italy on reference grass (≈ 0.1 m), grain sorghum (≈ 1 m) and sweet sorghum (≈ 3 m). For this analysis the sensitivity coefficients, taken as hourly means, were evaluated during the growth season when the crops completely covered the soil. The relative errors on evapotranspiration were also evaluated for r _a and r _c . The results showed that, for reference grass, available energy and aerodynamic resistance play a major role. For crops under water stress the most important term to evaluate is canopy resistance. For a tall crop, as sweet sorghum, the role of the vapour pressure deficit is fundamental, both when the crop is in good water status and under water stress. Received July 14, 1997 Revised February 5, 1998     

Evaluation of the Effect of Fault on the Stability of Underground Workings of Coal Mine through DEM and Statistical Analysis

The rock mass around an excavation is generally traversed by different geological discontinuities such as faults, folds, slips, joints, etc. Fault is one of the major geological discontinuities which creates lot of difficulties during underground winning of coal. Entire stress regime and ground conditions in the formation are altered in and around the faults. Faults also impose detrimental effects by introducing impurities, including clay and various forms of mineral matter into the coal seams; opening of pathways for the influx of water and gas into the underground workings; displacing the coal seams upward/downwards making the coal seams difficult or sometimes impractical to mine. Appropriate evaluation of the effect of the fault on the stability of the underground workings is a requisite for safe design of the underground mining structures. In this paper, a study has been carried out to assess the effect of the fault on the stability of underground coal mines by numerical simulation with distinct element method (DEM). On the calibrated DEM model, parametric study has been performed by varying the selected parameters, the dip and the friction angles of the fault. The analysis of variance (ANOVA) shows that both the factors have statistically significant effect on the strength of the coal pillar. Similarly, the displacement of the immediate roof and the height of the disturbed strata are evaluated by the DEM modelling and statistical analysis when the fault passes through the middle of the gallery. The results of ANOVA for both cases indicate that the both factors have significant effect on the displacement of the immediate roof and the height of the disturbed strata. It is obtained from the study that the low angle fault causes high instability in the immediate roof. The paper has been supplemented with the field observations where instability in underground roadways of a coal mine in India is caused by the fault. It was observed in VK-7 incline mine of Singareni Collieries Company Limited, India that there was sudden failure of immediate roof of a roadway where a low angle fault crosses the middle of the roadway. The findings of the paper help to understand the behaviour of the coal pillar and the surrounding rock mass in the presence of the fault. The study would also help to take appropriate decisions about the unstable regions of the working safeguarding safety in underground coal mines.     

New Discovery of Hipparion theobaldi Skull from the Late Miocene of Padhri, District Jhelum, Punjab, Pakistan and Associated Mammalian Fossil Assemblage

A fossil-bearing locality near Padhri village, Dhok Pathan, 55 km away from the tehsil Dina, Jhelum District, in the Potwar Plateau, Middle Siwaliks, Punjab, northern Pakistan, is significantly rich in mammalian fossils. This site has provided an abundant mammalian fossil fauna of Late Miocene age from the Dhok Pathan Formation (Fm.). The recovered material belongs to four families: Equidae (horses), Rhinocerotidae (rhinos), Bovidae (cows), and Suidae (pigs). We discovered a new skull of hipparionine Hipparion theobaldi from this locality along with 22 specimens from the associated assemblage of fossil mammals. The recovered material includes seven other species: the aceratheriine Chilotherium intermedium, boselaphines Tragoportax punjabicus, Selenoportax vexillarius, Pachyportax latidens, the antelope Gazella lydekkeri and suinine Propotamochoerus hysudricus. The specimens are isolated teeth, fragments of maxilla, mandibles and horn cores. The Dhok Pathan Fm. is generally composed of claystone, siltstone and sandstone beds and, based on the mammalian fauna, the Padhri fossil locality is dated as Late Miocene. Thi99s formation was deposited in a subtropical paleoenvironment and the predominance of fossil bovids indicates extremely moist conditions with small but frequent standing water bodies.