Adding the missing third and fourth dimensions to trajectory analysis in carbonate systems

We developed a seismic geomorphology-based procedure to enhance traditional trajectory analysis with the ability to visualize and quantify lateral variability along carbonate prograding-margin types (ramps and rimmed shelves) in 3D and 4D. This quantitative approach analysed the shelf break geometric evolution of the Oligo-Miocene carbonate clinoform system in the Browse Basin and delineated the feedback between antecedent topography and carbonate system response as controlling factor on shelf break rugosity. Our geometrical analysis identified a systematic shift in the large-scale average shelf break strike direction over a transect of 10 km from 62° to 55° in the Oligo-Miocene interval of the Browse Basin, which is likely controlled by far-field allogenic forcing from the Timor Trough collision zone. Plotting of 3D shelf break trajectories represents a convenient way to visualize the lateral variability in shelf break evolution. Shelf break trajectories that indicate contemporaneous along-strike progradation and retrogradation correlate with phases of autogenic slope system re-organization and may be a proxy for morphological stability of the shelf break. Shelf break rugosity and shelf break trajectory rugosity are not inherited parameters and antecedent topography does not dictate long-term differential movement of the shelf margin through successive depositional sequences. The autogenic carbonate system response to antecedent topography smooths high-rugosity areas by filling accommodation and maintains a relatively constant shelf break rugosity of ~150 m. Color-coding of the vertical component in the shelf break trajectory captures the creation and filling of accommodation, and highlights areas of the transect that are likely to yield inconsistent 2D sequence stratigraphic interpretations.     

Quantifying soil variability in GIS applications: II Spatial distribution of soil properties

Abstract

Application of Geographical Information Systems (GIS) to environmental problems requires a spatial delineation of soil properties and some a priori knowledge of their variability. In the U.S.A. estimated soil properties are available from soil surveys published by the National Cooperative Soil Survey. However, information on the extent and nature of their variability is generally lacking. To remedy the situation, variability of selected soil properties measured at farm and watershed scales was compared with published values using geostatistical methods. Results showed that the variability of bulk density and hydraulic conductivity can be estimated by comparing regularized variograms of measured and published values. An overlay method was proposed that combines measured and published delineations of soil properties into an overlay with the properties of both. The technique makes it possible to incorporate variability into a GIS analysis using data available from published soil surveys.     

On the magnetism of stars and planets

A self-consistent statistical approach to the problem of planetary and stellar magnetism is suggested. The mechanism of magnetic field generation in the astronomical objects, where the existence of fields is associated with the axial rotation of objects, is discussed. In the general case the light pressure, the centrifugal, gravitational and other forces produce partial -separation of the charges. As a result of the system rotation, the magnetic fields of the currents of these charges are not compensated. The influence of various factors on the magnetic field of some object is analysed.     

河北平原水系密度与隐伏活动构造的关系

以1926年出版的比例尺为1：5万的顺直地形图作为基础图件，用地理信息系统技术对河北平原作水系密度计量分析，揭示隐伏在第四纪巨厚的沉积物之下活动构造的信息，研究结果证实水系线密度统计图与使用其它地球科学方法获得的成果，例如基底活动断块图，地貌类型图和第四纪厚度图都有很好的对应，特别与布格重力图对应更好，研究结果发现水系密度图与布格重力异常图在总体一致性较好的前提下，多处反向异常区均为近代强震发生的区域，提出这种地表水系密度统计研究的成果不仅可以揭示深部隐伏的活动构造，而且具有较明确的时间含义。     

Power spectrum of geomagneticK p-index detected at Misallat magnetic station

TheK _p-indices measured at Misallat station [ø = 29°45 N; = 30°54 E] during the period 1958–1989, have been compared with the data of two geomagnetic stations; one of them has similar longitude as Misallat and the second has almost similar latitude. The spectra of daily and hourly data of the three stations are compared together to define the latitude and longitude-effects on the detected periodicities. Daily periodicities ofK _p-index activities at the values 32.7, 21.2, 12.9, 11.6 and 9.2 days have been obtained to be common in the spectra of the three stations. The existence of 5-days periodicity in these stations has also been detected.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.     

Gold–quartz deposits of the Zhdaninsky ore–placer cluster,eastern Yakutia: Structural control and formation conditions

Gold deposits and occurrences small in reserves and high in Au grade conventionally determine the line of prospecting in terrigenous sequences of the Verkhoyansk–Kolyma region. In this paper, the geological structure of such gold objects is considered with the example of the deposits and prospects making up the Zhdaninsky ore–placer cluster in the Republic of Sakha (Yakuia). From lithological, structural, and mineralogical–geochemical data, the formation conditions of ore-bearing complexes are specified, the geological evolution history of the northern Ol’chan Zone of the Kular–Nera Belt is reconstructed, and the zonal distribution of mineralization within the ore–placer cluster is revealed. The structural–compositional complexes were formed in the following succession: (1) sedimentation at the shelf of the passive margin accompanied by synsedimentation deformations; (2) metagenesis of sediments and the development of bedding-plane intraformational detachments of collision stage D₁ under conditions of tangential compression and accompanied by the formation of carbon dioxide–aqueous metamorphic fluid at a temperature of 300°C and under a pressure of 1.4 kbar; (3) folding and faulting of orogenic stage D₂ with the formation of synkinematic magmatic bodies, metasomatic alteration, and Au-bearig mineral assemblages. Small Au-bearing objects with veined mineralization and high Au grade are localized in structures of stage D₂ transverse to bedding-plane schistosity S₁. They form at the collision stage above intraformational detachment surfaces and are controlled by shear structures of the orogenic stage with misalignment of these deformations. The ore zoning is determined by the distribution of Co and Ni minerals and by variations in the anionic composition of ore (S, As, Sb).     

Mantle(?) xenoliths in the carbonatites of northern Transbaikalia

The composition and nature of high-Cr minerals in lithic clasts from the carbonatites of the Veseloe occurrence, northern Transbaikalia, were considered. In order to determine their source, the Cr-bearing phases were compared with chromite, magnetite, and rutile from ultrabasic rocks, mantle xenoliths, and eclogites. It was suggested that the xenoclasts studied were formed at great depths, whereas the carbonatites were directly derived from the mantle rather than formed by the crustal differentiation of a silicate-carbonate melt.     

A STUDY ON A NEW MECHANICAL MODEL FOR FOUNDATIONS AND ITS ELASTIC SETTLEMENT RESPONSE

In the present paper, a new foundation model has been proposed by introducing a stretched rough elastic membrane in the Pasternak shear layer sandwiched between two spring layers which is an extension of Kerr model. Considering the equilibrium of different elements, the equations governing the elastic settlement response of the model are derived. Finite difference scheme has been employed to solve the governing equations. The parametric studies carried out show the effect of several parameters on the elastic settlement response of the model. The proposed model is well suited for idealizing the behavior of geosynthetic-reinforced granular fill—soft soil system besides other applications.     

Non-Linear Elasto-Plastic Behaviour of Lacustrine Clay

The paper presents the experimental investigation and analysis of the non-linear elasto-plastic stress–strain behaviour of normally consolidated lacustrine clay. Drained triaxial stress path tests were performed on natural block samples of Swiss lacustrine clay. Data were analysed using plasticity theory and the shape and extent of kinematic yield and bounding surfaces were determined and found to be elliptical but not congruent. Cross-anisotropic elasticity was used to quantify elastic strains to permit plastic strain increment vectors and hence a plastic potential surface to be defined.