Regional setting of Håkon Mosby Mud Volcano, SW Barents Sea margin

The Håkon Mosby Mud Volcano (HMMV) is a seafloor mud volcano, having a 1-km-diameter circular shape and a relief of 8–10?m. HMMV is located within a slide scar on the Bjørnøya glacial submarine fan on the SW Barents Sea slope, and is underlain by a >6-km-thick Cenozoic sequence. Multichannel seismic data reveal a 1- to 2-km-wide disturbed zone, which extends to a depth of >3?km below the HMMV. We relate the zone to the presence of free gas. The seismic data are compatible with an intrasedimentary sourced mud volcano related to the glacial sedimentation history and mass movements.     

A system for large volume aerosol sampling in the stratosphere using electrostatic precipitation

Summary An instrumental system for securing aerosol samples in the stratosphere by electrostatic precipitation has been developed. The system is designed to be balloon borne to altitudes between 30 km and 45 km and to collect with high efficiency the aerosol content of the stratosphere at these altitudes. Volumetric sampling rates of one meter³ sec^–1 ambient air are obtained with the sampling configuration with collection efficiency in excess of 95 percent for particles between .01 microns (mmd) and 2 microns (mmd).Specially developed associated instrumentation for altitude and air flow measurement points to an important versatility in the application of gas discharges for low-pressure (or high altitude) altimetry and anemometry over a very wide range of air densities and tempertures.The theory, operation, and performance of the aerosol sampling system and associated subsytems are described. Certain new observations of low-density corona physics phenomena are reported and potential applications to other areas of research and technology are indicated.

---

Zusammenfassung Es wurde ein Instrument entwickelt, mit dem man Aerosolproben aus der Stratosphäre durch elektrostatischen Niederschlag erhalten kann. Das System wird von einem Ballon in Höhen zwischen 30 und 45 km getragen und sammelt mit hoher Wirksamkeit Proben des Aerosolgehalts in diesen Höhen. Mit dem Instrument wird eine Sammelgeschwindigkeit von 1 m³/sek erreicht bei einer Sammelwirksamkeit von mehr als 95% für Partikel von Größen zwischen 0,01 und 2 Mikron.Besonders entwickelte angeschlossene Instrumente zur Messung der Höhe und der Luftströmungen zeigen die wesentliche Vielseitigkeit der Anwendung von Gasentladungen für die Höhenmessung und Windmessung bei niedrigem Druck (oder in großen Höhen) in einem großen Bereich der Luftdichte und der Temperatur.Es werden die Theorie, die Arbeitsweise und die Ausführung des Aerosolprobeninstrumentes und der angeschlossenen Hilfssysteme beschrieben. Es wird über einige neue Beobachtungen aus dem Bereich der Phänomene der Gasentladungen bei niedriger Dichte berichtet und neue mögliche Anwendungen in anderen Zweigen der Forschung und Technologie werden angegeben.

---

Résumé On a construit un instrument au moyen duquel on peut obtenir des échantillons d'aérosole stratosphérique par précipitation électrostatique. Le système est emporté par un ballon à des altitudes de 30 à 45 km et rassemble avec efficacité des echantillons du contenu de l'aérosole à ces altitudes. Avec cet appareil, on obtient une vitesse de prise de 1 m³/sec avec une efficacité de plus de 95% pour les particules comprises entre 0,01 et 2 microns.Des appareils spéciaux annexes permettent de mesurer la hauteur et les courants d'air. Ils démontrent les possibilités multiples de l'utilisation de la décharge dans un gaz pour la mesure de l'altitude et des vents par pression très faible (ou à très haute altitude) dans un domaine étendu tant de la densité de l'air que de la température.On décrit dans ce mémoire la théorie, le mode de travail et l'exécution de cet instrument de prise d'échantillons d'aérosoles ainsi que des systèmes auxiliaires annexes. On rapporte sur quelques nouvelles observations faites dans le domaine des phénomènes connexes à la décharge dans un gaz par faible densité. On indique en outre de nouvelles possibilités d'utilisation du système dans d'autres branches de la recherche ou de la technologie.

---

---

With 16 Figures

---

This work has been supported by the Division of Biology and Medicine, U. S. Atomic Energy Commission, under contract at (30-1)-2363 with Del Electronics.     

Boundary skin friction and sediment transport about an animal-tube mimic

ABSTRACT
A flume study was made of fluid flow, boundary skin friction, and sediment transport about an animal-tube mimic. The effect of a tube on momentum transfer depends most strongly on its height. A tube increases the net boundary skin friction locally and tends to promote sediment entrainment near its base. Flow in this region appears to be governed by the same similarity laws that apply to cylinders with much larger body Reynolds number. Particles travelling as suspended load may be deposited immediately downstream of the tube. The net sedimentological effect of any tube (i.e. deposition or scour) will depend both on its height and on the boundary shear stress imposed by the external flow. The near-wake region of a tube is dominated by a strong cross-stream exchange of momentum. Wake perturbations decay downstream seemingly in accordance with similarity laws which also govern mounted, two-dimensional structures.     

A STUDY OF THE SEISMIC SIGNATURES OF SEDIMENTATION MODELS USING SYNTHETIC SEISMOGRAMS*

In modern exploration for hydrocarbons there is a great emphasis on the location of stratigraphic traps and estimation of lithologic information like sand-shale ratios from seismic data. In order to investigate the possibilities of success in this endeavour we have studied the synthetic seismograms for wave form and spectral characteristic for four basic sedimentation models: (I) interbedded sand-shale model representing the sediments of generally fluviatile origin, (2) interbedded coal-shale model representing deltaic deposits, (3) sedimentary models representing transgression and regression of shore lines, and (4) a basal sand model. The results have shown that for the first two models a change in the sand-shale or coal-shale ratio results in a characteristically different seismogram. The nature of the seismogram, however, is also strongly dependent on how the sand-shale or coal shale layers are arranged to ultimately give the same number of total layers, thus implying the same coal-shale or sand-shale ratios. The transgression, regression, and basal sand models also produce characteristically different seismic signatures. The spectra of these seismograms show attendant characteristic changes. However, it seems that in the case of real data which are disturbed by noise and the effects of overlying layers these characteristic features may not always be distinguishable.     

Long-term variability of air temperature and precipitation conditions in the Polish Carpathians

Mountain regions are sensitive to climate changes, which make them good indicators of climate change. The aim of this study is to investigate the spatial and temporal variability of air temperature and precipitation in the Polish Carpathians. This study consists of climatological analyses for the historical period 1851-2010 and future projections for 2021-2100. The results confirm that there has been significant warming of the area and that this warming has been particularly pronounced over the last few decades and will continue in the oncoming years. Climate change is most evident in the foothills; however, these are the highest summits which have experienced the most intensive increases in temperature during the recent period. Precipitation does not demonstrate any substantial trend and has high year-to-year variability. The distribution of the annual temperature contour lines modelled for selected periods provides evidence of the upward shift of vertical climate zones in the Polish Carpathians, which reach approximately 350 meters, on average, what indicates further ecological consequences as ecosystems expand or become extinct and when there are changes in the hydrological cycle.     

Phosphorus removal in low alkalinity secondary effluent using alum

The alkalinity plays an important role in phosphorus removal using coagulant. The dosage of coagulant in the low alkalinity wastewater is limited due to rapid pH changes. In the present study, a series of jar test was conducted using low alkalinity wastewater (50 mg/L) to evaluate the optimum pH, dosage and performance parameters (slow mixing and settling time) for the common coagulant alum. From the experiment, it was found that the dosage of coagulant and removal of phosphorus depend upon the pH of the wastewater after adding coagulant. The final optimum pH for efficient P removal was found to be within the range of 5.7–5.9. This range acts as an indicator and it is the maximum tolerable pH range for phosphorus removal for low alkalinity wastewater. The optimum time for slow mix and settling was found to be 20 min. The optimum mole ratio of alum to remove one mole of phosphorous was found to be 2.3. The alum coagulation at pH 7 produced effluent with the total residual phosphorus and reactive phosphorus content of 0.3 and 0.9 mg/L, respectively.     

New insights into precious metal enrichment on the Isle of Rum,Scotland

The Rum Layered Suite (NW Scotland) is generally regarded as one of a handful of classic examples of open‐system layered mafic‐ultramafic intrusions, or ‘fossilized’ basaltic magma chambers, world‐wide. The eastern portion of the Rum intrusion is constructed of sixteen repeated, coupled, peridotite–troctolite units. Each major cyclic unit has been linked to a major magma replenishment event, with repeated settling out of ‘crops’ of olivine and plagioclase crystals to form the cumulate rocks. However, there are variations in the lithological succession that complicate this oversimplified model, including the presence of chromitite (>60 vol. percent Cr‐spinel) seams. The ～2 mm thick chromitite seams host significant platinum‐group element (PGE) enrichment (e.g. ～2 ppm Pt) and likely formed in situ, i.e. at the crystal mush–magma interface. Given that the bulk of the world's exploited PGE come from a layered intrusion that bears remarkable structural and lithological similarities to Rum, the Bushveld Complex (South Africa), comparisons between these intrusions raise intriguing implications for precious metal mineralization in layered intrusions.     

Seismic‐stratigraphic constraints on the age of the Faroe Islands Basalt Group,Faroe–Shetland region,Northeast Atlantic Ocean

Lower Palaeogene extrusive igneous rocks of the Faroe Islands Basalt Group (FIBG) dominate the Faroese continental margin, with flood basalts created at the time of breakup and separation from East Greenland extending eastwards into the Faroe‐Shetland Basin. This volcanic succession was emplaced in connection with the opening of the NE Atlantic; however, consensus on the age and duration of volcanism remains lacking. On the Faroe Islands, the FIBG comprises four main basaltic formations (the pre‐breakup Lopra and Beinisvørð formations, and the syn‐breakup Malinstindur and Enni formations) locally separated by thin intrabasaltic sedimentary and/or volcaniclastic units. Offshore, the distribution of these formations remains ambiguous. We examine the stratigraphic framework of these rocks on the Faroese continental margin combining onshore (published) outcrop information with offshore seismic‐reflection and well data. Our results indicate that on seismic‐reflection profiles, the FIBG can be informally divided into lower and upper seismic‐stratigraphic packages separated by the strongly reflective A‐horizon. The Lower FIBG comprises the Lopra and Beinisvørð formations; the upper FIBG includes the Malinstindur and Enni formations. The strongly reflecting A‐horizon is a consequence of the contrast in properties of the overlying Malinstindur and underlying Beinisvørð formations. Onshore, the A‐horizon is an erosional surface, locally cutting down into the Beinisvørð Formation; offshore, we have correlated the A‐horizon with the Flett unconformity, a highly incised, subaerial unconformity, within the juxtaposed and interbedded sedimentary fill of the Faroe‐Shetland Basin. We refer to this key regional boundary as the A‐horizon/Flett unconformity. The formation of this unconformity represents the transition from the pre‐breakup to the syn‐breakup phase of ocean margin development in the Faroe–Shetland region. We examine the wider implications of this correlation considering existing stratigraphic models for the FIBG, discussing potential sources of uncertainty in the correlation of the lower Palaeogene succession across the Faroe–Shetland region, and implications for the age and duration of the volcanism.