Improved Petrological Modal Analyses from X-ray Powder Diffraction Data by use of the Rietveld Method I. Selected Igneous, Volcanic, and Metamorphic Rocks

Mineral modes have been determined for specimens of eight rocktypes from CuK X-ray powder diffraction data using the Rietveldmethod. The samples include two granites, a granodiorite, adamellite,gabbro, basalt, trachyte, and two granulite-facies metamorphicrocks. Up to eight individual mineral components have been measuredin each sample (no glassy phases were observed), with a detectionlimit of {small tilde}1 wt.%, depending on the mineral assemblage.Marked variations in grain size (i.e., granite vs. trachyte)provide no difficulties for the X-ray method. The X-ray resultscompare very favourably with (1) optical modes determined forthe medium–coarse-grained samples by point counting, (2)normative calculations obtained using locally enhanced catanormand mesonorm software, and (3) corresponding Rietveld modesdetermined, for two samples, from neutron powder data. Wheredifferences occur, these are discussed in relation to the limitationsof each of the methods. The improved accuracy of the X-ray method is due primarily tothe incorporation of the full diffraction profile in the Rietveldanalysis calculations, and the elimination of preferred orientationby collecting the data from samples packed in glass capillaries(i.e., Debye–Scherrer mode). The good agreement of theX-ray and neutron modes shows that the usual problems encounteredwith microabsorption, extinction, and sampling are of littleconcern in these rocks. The results highlight one of the majoradvantages provided by Rietveld modal analysis over the moretraditional ‘reference intensity’ X-ray methods,namely, that the crystal chemistry (and thus the calibrationconstants) of the individual phases can be adjusted dynamicallyduring each individual analysis. This not only provides moreaccurate phase abundances, but also gives important supplementaryinformation about the mineralogy of the major components.     

A case study of warm air advection over a melting snow surface

When relatively warm, moist air moves over a snow surface, sensible heat and moisture are extracted from its lower layers and used to melt the snow. The depth of the cooled layer depends on horizontal wind speeds and the presence of high vertical wind shear. The mechanism for air mass modification appears to be turbulent mixing.     

Authigenic iron and titanium oxides in triassic red beds: (St. Bees Sandstone), Cumbria,Northern England

Authigenic iron and titanium oxides occur in three main textural varieties in the St. Bees Sandstone, a Triassic red bed succession in Cumbria. These are: (a) overgrowths of haematite, titaniferous haematite, anatase, and rutile which generally occur on detrital host grains of similar compositions. The overgrowths may occur as syntaxial rim cements or rhombohedral and prismatic projections and are always in optical continuity, (b) discrete crystals of anatase (including octahedrite) and haematite 10-40 μm in size occur in pore spaces, and (c) fine grained ( < 1 μm) pigmentary haematite occurs as grain coatings around detrital grains and in the interstitial matrix. The euhedral nature and pore-filling habit clearly indicate the authigenic origin of these iron- and titanium oxides. All three textural varieties are believed to have been precipitated from ground waters containing dissolved ferrous and titanium ions. These ions were derived from the intrastratal solution of detrital iron and titanium bearing grains including ferromagnesian silicates and iron-titanium oxides. The precipitation of iron oxides from migrating ground waters in the manner described here goes some way to explaining how thick, uniformly red successions can be formed.     

On the eigenvalues of kinematic α-effect dynamos

The kinematic α-effect dynamo problem is investigated in the case of an exterior perfect conductor. It is shown that certain approximate symmetries discovered in the numerical analysis of ROBERTS (1972) are exact for this case. As an illustration, an exact solution is given in a cylindrical geometry, where the equations can be written in terms of one variable. The implications for the earth's dynamo are discussed.     

Photometrische Kalibrierung von Schmidtspiegelaufnahmen durch ein bildteilendes Hilfsprisma

Plates of the Tautenburg Schmidt can be calibrated with the aid of a beam-splitting prisma only if Schraffierkassette plates are used. The effects of image structure, scintillation and intermittence on in-focus images are different for the main component and the prismatic companion. Therefore, such plates cannot be used to set up a photometric scale.     

Penetrative convection in rotating fluids: A model for the base of stellar convection zones

Abstract

To model penetrative convection at the base of a stellar convection zone we consider two plane parallel, co-rotating Boussinesq layers coupled at their fluid interface. The system is such that the upper layer is unstable to convection while the lower is stable. Following the method of Kondo and Unno (1982, 1983) we calculate critical Rayleigh numbers R_c for a wide class of parameters. Here, R_c is typically much less than in the case of a single layer, although the scaling R_c～T^2/3 as T → ∞ still holds, where T is the usual Taylor number. With parameters relevant to the Sun the helicity profile is discontinuous at the interface, and dominated by a large peak in a thin boundary layer beneath the convecting region. In reality the distribution is continuous, but the sharp transition associated with a rapid decline in the effective viscosity in the overshoot region is approximated by a discontinuity here. This source of helicity and its relation to an alpha effect in a mean-field dynamo is especially relevant since it is a generally held view that the overshoot region is the location of magnetic field generation in the Sun.     

Formation Mechanism of Mud Bank Along the Southwest Coast of India

Mud bank formation during the southwest monsoon along the southwest coast of India remains an enigma to the researchers and coastal community in spite of several earlier studies. The present study attempts to unravel the mystery through a high-frequency, season-long time-series observation at Alappuzha, located at the southern part of the west coast of India, a region of frequent occurrence of mud bank. Using 7-month-long weekly time-series observation, we identified strong winds and high waves associated with onset of the southwest monsoon and subsequent three episodic atmospheric low-pressure events (LPEs).With the help of in situ time-series data, we show that the strong winds and high waves associated with southwest monsoon pre-conditions the near shore bottom sediment to bring it into suspension. The high amplitude waves associated with the southwest monsoon, while propagating from the deep water to shallow water region, interact with the bottom initiating bottom-sediment movement and its suspension due to wave refraction and shoaling. The sporadic occurrence of the atmospheric LPEs enhances the process of suspension of bottom sediment in the near shore region leading to the formation of fluid mud. Simulations with a cohesive sediment transport model yielded realistic estimates of sediment transport, in the presence of an onshore current, a pre-requisite for transporting the fluid mud toward the coast. The prevailing onshore upwelling current during the southwest monsoon provides the favorable pre-requisite conditions for transporting the fluid mud through depression channel network towards the coast. Once sufficient quantity and thickness of fluid mud is accumulated in the near shore region, it acts as a wave damper for subsequent high monsoon waves, as indicated by the time-series wave data, leading to the formation of tranquil mud bank region. Depression channel networks extending from the shelf to the coast off Alappuzha, Kochi, Ponnani, Beypore, and Ullal were found in the bathymetric charts, thus explaining why mud banks occur only at few locations in spite of the prevalence of similar monsoon conditions.     

Hanford tank residual waste – Contaminant source terms and release models

Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)₂-saturated solution, or a CaCO₃-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO₃-saturated solution than with the Ca(OH)₂-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)₂-saturated solution than by the CaCO₃-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.     

Fe3+ in shocked olivine crystals of the ALHA 77005 meteorite

ALHA 77005, a shocked achondrite of the shergottite group, is unique in containing cumulus olivine crystals which display a brownish color in thin section. Mössbauer, EPR, and optical spectroscopic studies show the presence of Fe³⁺ in the olivine. Approximately 4.5 wt.% of the total iron in the olivine (24 wt.% as FeO) is in the trivalent state. The Fe³⁺ ions preferentially occupy M2 lattice positions. Charge transfer between Fe³⁺ and Fe²⁺ as well as between Fe³⁺ and oxygen ligands causes a broad absorption band in the optical spectrum at high energies which is the reason for the olivine color. It is concluded that the color of the ALHA 77005 olivine is preterrestrial and may be the result of shock-induced oxidation of the olivine crystals on the meteorite parent body.