Status of Satellite Orbit Determination and Time Synchronization Technology for Global Navigation Satellite Systems

In the form of satellite ephemerides and clock parameters, the space datum and system time information of one global navigation satellite system (GNSS) is transferred to users. With the continuous updating in the satellite payload such as the high-precision atomic clock, the monitoring and tracking technique such as the inter-satellite link, and in the data processing technique, the accuracy and real-time performance of the satellite ephemeris and clock error products are steadily improved. Starting from December 27th, 2018, the BeiDou Navigation System 3, or BDS-3, has provided the accurate and reliable basic positioning, navigation, and timing (PNT) service for the users in the countries within the “one belt and one road”. This paper has summarized the faced challenges of the precise orbit determination and time synchronization from the regional BDS-2 system to the BDS-3 global system, and the specific solutions at the control segment. In addition, this paper has compared the BDS with other GNSS systems in terms of technical characteristics. Finally, aiming at a higher accuracy and more reliable PNT service, the road map of precise orbit determination and time synchronization technique for the next generation navigation systems is discussed, which will provide a reference for developing the global navigation satellite systems with an even higher accuracy.     

表层系列采泥器生产过程中的工艺设计和工艺保障

本文主要介绍了三种系列采泥器在加工生产过程中的工艺设计及工艺保障。     

SIMULATION AND PREDICTION OF DEBRIS FLOW USING ARTIFICIAL NEURAL NETWORK

Debris flow is one of the most destructive phenomena of natural hazards. Recently, major natural haz-ard, claiming human lives and assets, is due to debris flow in the world. Several practical methods for forecasting de-bris flow have been proposed, however, the accuracy of these methods is not high enough for practical use because of the stochastic and non-linear characteristics of debris flow. Artificial neural network has proven to be feasible and use-fill in developing models for nonlinear systems. On the other hand, predicting the future behavior based on a time se-ries of collected historical data is also an important tool in many scientific applications. In this study we present a three-layer feed-forward neural network model to forecast surge of debris flow according to the time series data collect-ed in the Jiangjia Ravine, situated in north part of Yunnan Province of China. The simulation and prediction of debris flow using the proposed approach shows this model is feasible, however, further studies are needed.     

用程序型电子计算器处理矿脉纵投影实测数据

根据矿脉纵投影原理及相应的数学计算方法，编制了计算程序来处理矿脉纵投影实测数据，为地质绘图提供了准确的数据资料。     

Aftershock activity of Bhuj earthquake of january 26th, 2001

Following a large-sized Bhuj earthquake (M _s = 7.6) of January 26th, 2001, a small aperture 4-station temporary local network was deployed, in the epicentral area, for a period of about three weeks and resulted in the recording of more than 1800 aftershocks (-0.07 ≤M _L <5.0). Preliminary locations of epicenters of 297 aftershocks (2.0 ≤M _L <5.0) have brought out a dense cluster of aftershock activity, the center of which falls 20 km NW of Bhachau. Epicentral locations of after-shocks encompass a surface area of about 50 × 40 km² that seems to indicate the surface projection of the rupture area associated with the earthquake. The distribution of aftershock activity above magnitude 3, shows that aftershocks are nonuniformly distributed and are aligned in the north, northwest and northeast directions. The epicenter of the mainshock falls on the southern edge of the delineated zone of aftershock activity and the maximum clustering of activity occurs in close proximity of the mainshock. Well-constrained focal depths of 122 aftershocks show that 89% of the aftershocks occurred at depths ranging between 6 and 25 km and only 7% and 4% aftershocks occur at depths less than 5 and more than 25 km respectively. The Gutenberg-Richter (GR) relationship, logN = 4.52 - 0.89M_L, is fitted to the aftershock data (1.0<-M _L<5.0) and theb-value of 0.89 has been estimated for the aftershock activity.     

三峡蓄水后典型河段分形维数的变化分析

针对三峡工程蓄水后下游河道河床表面形态的变化,采用分形维数对河床表面形态进行量化,并分析河道冲淤调整特点,对河床表面分形维数(BSD)的变化特点及物理意义进行探讨。结果表明,BSD与河床各个剖面形态之间的关系是整体与部分的关系,BSD能全面地反映床面形态的复杂程度。三峡蓄水后,宜昌-虎牙滩和宜都河段BSD明显增大,关洲河段增大幅度较小,而芦家河河段BSD值略有减小,同时,各河段BSD的变化可在一定程度上表征三峡蓄水后下游河道河床综合阻力的调整结果。可通过对各河段演变趋势的分析,来预测其BSD的变化,进而为分析其阻力和水位的变化趋势提供依据。     

1999年北京持续高温天气过程的诊断分析

利用北京观象台观测资料和NCEP/NCAR再分析数据,对1999年6月24日至7月2日北京一次持续性高温天气的演变和发展过程及非绝热加热作用对系统的影响进行诊断分析,结果表明：在此次高温天气发生前,欧亚大陆中高纬度环流经向度很大,欧洲北部和贝加尔湖以南为高压脊控制,中亚和我国东北地区则处于低压槽内。贝加尔湖南部的高压脊纬向延伸范围较广,在东移过程中长时间影响北京。随着贝加尔湖以南的高压脊逐渐东移,北京上空下沉增温与非绝热加热作用有所增强,北京逐渐受到高温天气影响。在高温天气发生的后半阶段,我国东北的低压槽入海后在120130°E附近维持并发展,槽前非绝热加热率很大。从垂直方向来看,加热率在500 hPa以下随高度迅速增加,根据全型涡度方程,强烈的非绝热加热率垂直分布不均作为一个明显的涡度源区,对入海低压槽的稳定维持有显著的作用。而入海低压槽的稳定维持,又阻碍了华北高压脊的东移,使其在北京地区长时间稳定少动,为北京带来多日的持续性高温天气。     

Spectrophotometric variability of the magnetic CP star 56 Arietis in spectral region from 1950 to 3200 Å

We presented a phenomenological mode that attributes the precession of perihelion of planets to the relativistic correction. This modifies Newton’s equation by adding an inversely cube term with distance. The total energy of the new system is found to be the same as the Newtonian one. Moreover, we have deduced the deflection of light formula from Rutherford scattering. The relativistic term can be accounted for quantum correction of the gravitational potential and/or self energy of objects.     

天山地区SAR数据雪盖制图研究

在分析合成孔径雷达（ＳＡＲ）成像机理及雪盖参数散射特性的基础上，利用航天飞机搭载的成像雷达（ＳＩＲ－Ｃ）获取的天山Ｃ波段、多极化ＳＡＲ数据，进行提取雪盖信息的实验。数据通过预处理、散射系数图像的计算、去噪、入射角改正等处理后，利用ＢＡＹＥＳ监督分类方法产生该地区的雪盖分类图。实验结果表明，利用多波段、多极化ＳＡＲ进行雪盖制图是可行的。     

Two Periods of Skarn Mineralization in the Baizhangyan W–Mo Deposit,Southern Anhui Province,Southeast China: Evidence from Zircon U–Pb and Molybdenite Re–Os and Sulfur Isotope Data

The recently discovered Baizhangyan skarn‐porphyry type W–Mo deposit in southern Anhui Province in SE China occurs near the Middle–Lower Yangtze Valley polymetallic metallogenic belt. The deposit is closely temporally‐spatially associated with the Mesozoic Qingyang granitic complex composed of g ranodiorite, monzonitic g ranite, and alkaline g ranite. Orebodies of the deposit occur as horizons, veins, and lenses within the limestones of Sinian Lantian Formation contacting with buried fine‐grained granite, and diorite dykes. There are two types of W mineralization: major skarn W–Mo mineralization and minor granite‐hosted disseminated Mo mineralization. Among skarn mineralization, mineral assemblages and cross‐cutting relationships within both skarn ores and intrusions reveal two distinct periods of mineralization, i.e. the first W–Au period related to the intrusion of diorite dykes, and the subsequent W–Mo period related to the intrusion of the fine‐grained granite. In this paper, we report new zircon U–Pb and molybdenite Re–Os ages with the aim of constraining the relationships among the monzonitic granite, fine‐grained granite, diorite dykes, and W mineralization. Zircons of the monzonitic granite, the fine‐grained granite, and diorite dykes yield weighted mean U–Pb ages of 129.0 ± 1.2 Ma, 135.34 ± 0.92 Ma and 145.3 ± 1.7 Ma, respectively. Ten molybdenite Re–Os age determinations yield an isochron age of 136.9 ± 4.5 Ma and a weighted mean age of 135.0 ± 1.2 Ma. The molybdenites have δ³⁴S values of 3.6‰–6.6‰ and their Re contents ranging from 7.23 ppm to 15.23 ppm. A second group of two molybdenite samples yield ages of 143.8 ± 2.1 and 146.3 ± 2.0 Ma, containing Re concentrations of 50.5–50.9 ppm, and with δ³⁴S values of 1.6‰–4.8‰. The molybdenites from these two distinct groups of samples contain moderate concentrations of Re (7.23–50.48 ppm), suggesting that metals within the deposit have a mixed crust–mantle provenance. Field observation and new age and isotope data obtained in this study indicate that the first diorite dyke‐related skarn W–Au mineralization took place in the Early Cretaceous peaking at 143.0–146.3 Ma, and was associated with a mixed crust–mantle system. The second fine‐grained granite‐related skarn W–Mo mineralization took place a little later at 135.0–136.9 Ma, and was crust‐dominated. The fine‐grained granite was not formed by fractionation of the Qingyang monzonitic granite. This finding suggests that the first period of skarn W–Au mineralization in the Baizhangyan deposit resulted from interaction between basaltic magmas derived from the upper lithospheric mantle and crustal material at 143.0–146.3 and the subsequent period of W–Mo mineralization derived from the crust at 135.0–136.9 Ma.