Gold deposits associated with the gabbroic rocks at Tirek area,western Hoggar,Algeria: fluid inclusion study

The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H₂O-CO₂±CH₄ and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO₂ also contributed to the formation of the hydrothermal gold deposit at Tirek.     

A GIS-based method of risk assessment on no. 11 coal-floor water inrush from Ordovician limestone in Hancheng mining area,China

The no. 11 coal seam in the deep area of Hancheng mining area is mining in recent years, which is threatened by the water inrush from the Ordovician limestone aquifer. Coal-floor water inrush is governed by the water abundance of coal-floor aquifer, the water-resisting performance of coal-floor aquitard, and the pathway connecting the water source and the working face. To make an accuracy risk assessment of water inrush from the no. 11 coal seam floor, a GIS-based vulnerability index method (VIM) is adopted for its superior comprehensive consideration of more controlling factors, powerful spatial analysis, and intuitively display functions. This study firstly established an index system including the water pressure of the coal-floor aquifer, the unit water inflow, the thickness, the core recovery percentage, the thickness ratio of brittle rocks to ductile rocks, the thickness of effective aquitard, and the accumulated length of faults and folds, of which the former six indexes governed the water abundance of the coal-floor aquifer which was combined with the last two factors to determine the risk of coal-floor water inrush. Secondly, the thematic map of each controlling factor is established by GIS using the geological prospecting data, and the weight of each factor is determined by the analytic hierarchy process (AHP) after consulting the expert review panel. At last, a vulnerability index is obtained and used to assess the risk of coal-floor water inrush of the no. 11 coal seam. The risk of water inrush of the no. 11 coal seam of the study area was ranked to three zones: the southeastern shallow area in red color is the dangerous zone, the wide northwestern area in green color is the safe zone, and the transition area in yellow color is the moderate-risk zone. Compared with the actual water-inrush incidents, the risk assessment result was verified to achieve an accuracy of 82.35%, which is proved to be a dependable reference for the prevention and controlling of coal-floor water inrush of the no. 11 coal seam in Hancheng mining area.     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

Soil gas radon concentrations along the Ganos Fault (GF)

In this study, soil radon levels have been measured for the first time across the Ganos fault (GF), which is known as the western part of the North Anatolian Fault Zone. LR 115 Type 2 Solid State Nuclear Track Detectors (time integrated) have been applied to determine soil gas radon levels, and the survey was performed in 16 stations along the fault line. The results showed that soil gas radon concentrations and variation of concentration levels are comparable high along the fault line. It is also observed that in the middle of the Ganos Fault, fairly elevated radon levels were detected. These can be related to the activity of the fault lines. It is confirmed that the study area has a very active tectonic structure and is great location for analyzing radon variations.     

Provenance and Palaeoweathering Attributes of Proterozoic Rock Formations from the Son Valley,Central India

The characteristics of source rocks and weathering of Palaeoproterozoic phyllitic rock of Mahakoshal Group and Mesoproterozoic shales and siliciclastics of Vindhyan Supergroup exposed in Son Valley, Central India have been investigated by analyzing their chemical compositions. The investigations pertaining to the relationship between major-elements were carried out along Parshoi, Chitrangi, and Markundi areas of Son valley, Central, India. The studied rock strata have been classified into three categories namely phyllitic rocks, shales and sandstone.The A-CN-K ternary diagram, CIW, CIA, MIA, and ICV values indicate about the similar provenance or source rocks subjected to severe chemical weathering, under dry and hot-humid climates in a basic and acidic environment with changing lower to higher PCO₂ of continental flora. Various geochemical discriminantts diagrams, elemental ratios suggest that rocks are derived from post-Archaean-Proterozoic igneous source. The igneous source was mainly granite with a minor contribution of granodioritic rock, in a passive margin setting. The sediments responsible for formation of shale and sandstones were most likely deposited in the interglacial period in between the Mesoproterozoic and Neoproterozoic glacial times. Compositionally the sandstones is distinctive of cratonic environments with their passive continental margin setting. However, the phyllities of Mahakoshal Group suggests their formation under lower weathering conditions in dry climatic conditions which were operating on more intermediate to basic igneous rocks with abundance of mafic minerals.     

Accessing effects and signals of leakage from a CO<Subscript>2</Subscript> reservoir to a shallow freshwater aquifer by reactive transport modelling

CO₂ geological storage is a transitional technology for the mitigation of climate change. In the vicinity of potential CO₂ reservoirs in Hungary, protected freshwater aquifers used for drinking water supplies exist. Effects of disaster events of CO₂ escape and brine displacement to one of these aquifers have been studied by kinetic 1D reactive transport modelling in PHREEQC. Besides verifying that ion concentrations in the freshwater may increase up to drinking water limit values in both scenarios (CO₂ or brine leakage), total porosity of the rock is estimated. Pore volume is expected to increase at the entry point of CO₂ and to decrease at further distances, whereas it shows minor increase along the flow path for the effect of brine inflow. Additionally, electrical conductivity of water is estimated and suggested to be the best parameter to measure for cost-effective monitoring of both worst-case leakage scenarios.     

Assessment of dynamic impact force of debris flow in mountain torrent based on characteristics of debris flow

Landslides and debris flows that occur around residential areas are considered, globally, as significant disasters that cause damage to human life and property. With terrain slope defining the flow characteristics of debris flows, flow depth, flow velocity, and impact force vary by time and distance. In particular, when a structure is located in the flow path of debris flows, the flow characteristics of debris flows vary by terrain slope and direction angle. To simulate the flow characteristics of these debris flows, the simulation results obtained by FLO-2D were analyzed with six-stage conditions for the research area. In the analysis, the flow depth, flow velocity, and impact force were estimated on the basis of the outlet of the research area in the presence and absence of structure(s) at certain distances. With this, the variation of the impact force in accordance with the variation of the flow depth of the debris flows was highly similar to the simulation results obtained by FLO-2D, when the correction index (α) of the suggested dynamic impact force equation was 0.3–0.4. There were sections where the estimated value of the impact force was overestimated near the outlet, and it was judged that the fixed values of the terrain factors (width, roughness coefficient, slope, etc.) caused the impact force to be overestimated. However, the correlation analysis showed that the correlation index was above the normal ranges in the suggested dynamic impact force equation for debris flows with the application of the terrain factors.     

Dependence of radon exhalation on grain size of sedimentary waste

Tailings resulted from sulphuric acid leaching process of uranium from sedimentary rocks contain high concentrations of ²²⁶Ra and its daughters, the most important of which is ²²²Rn. Movement of radon gas out of the tailings is strongly influenced by the physicochemical characteristics of these tailings especially their radium content and the grain size. So, the tailing samples were size fractionated into four sizes (>?250, 250–125, 125–74 and <?74 µm). The natural radioactivity was investigated using hyper-pure germanium detector and solid-state nuclear track detectors (CR-39) for bulk size and after size fractionation. The activity concentrations of different radionuclides in size-fractionated tailing samples have been shown to be strongly dependent on the size of the particles. In the range of >?250 and <?74 µm, the activity concentrations of ²³⁰Th, ²²⁶Ra, ²¹⁴Pb, ²¹⁴Bi, ²¹⁰Pb, ²³²Th and ⁴⁰K increased throughout with decreasing particle size, while that of ²³⁸U, ²³⁴U and ²³⁵U have an opposite effect. The results revealed an inverse relationship between the radon exhalation rate and size fractionation. Also, the results showed a good correlation between radium activity concentration and radon mass exhalation rate.     

Assessing shallow landslide hazards using the TRIGRS and SHALSTAB models,Serra do Mar,Brazil

The hillslopes of the Serra do Mar, a system of escarpments and mountains that extend more than 1500 km along the southern and southeastern Brazilian coast, are regularly affected by heavy rainfall that generates widespread mass movements, causing large numbers of casualties and economic losses. This paper evaluates the efficiency of susceptibility mapping for shallow translational landslides in one basin in the Serra do Mar, using the physically based landslide susceptibility models SHALSTAB and TRIGRS. Two groups of scenarios were simulated using different geotechnical and hydrological soil parameters, and for each group of scenarios (A and B), three subgroups were created using soil thickness values of 1, 2, and 3 m. Simulation results were compared to the locations of 356 landslide scars from the 1985 event. The susceptibility maps for scenarios A1, A2, and A3 were similar between the models regarding the spatial distribution of susceptibility classes. Changes in soil cohesion and specific weight parameters caused changes in the area of predicted instability in the B scenarios. Both models were effective in predicting areas susceptible to shallow landslides through comparison of areas predicted to be unstable and locations of mapped landslides. Such models can be used to reduce costs or to define potentially unstable areas in regions like the Serra do Mar where field data are costly and difficult to obtain.     

Interior boundary-aligned unstructured grid generation and cell-centered versus vertex-centered CVD-MPFA performance

Grid generation for reservoir simulation must honor classical key constraints and be boundary aligned such that control-volume boundaries are aligned with geological features such as layers, shale barriers, fractures, faults, pinch-outs, and multilateral wells. An unstructured grid generation procedure is proposed that automates control-volume and/or control point boundary alignment and yields a PEBI-mesh both with respect to primal and dual (essentially PEBI) cells. In order to honor geological features in the primal configuration, we introduce the idea of protection circles, and to generate a dual-cell feature based grid, we construct halos around key geological features. The grids generated are employed to study comparative performance of cell-centred versus cell-vertex control-volume distributed multi-point flux approximation (CVD-MPFA) finite-volume formulations using equivalent degrees of freedom. The formulation of CVD-MPFA schemes in cell-centred and cell-vertex modes is analogous and requires switching control volume from primal to dual or vice versa together with appropriate data structures and boundary conditions. The relative benefits of both types of approximation, i.e., cell-centred versus vertex-centred, are made clear in terms of flow resolution and degrees of freedom required.