Chemical Characterisation of Geological Raw Materials Used in Traditional Ceramics

A wide range of natural raw materials is used in the manufacture of traditional ceramic products such as ceramic tiles, frits, glazes and pigments. The chemical composition of these raw materials needs to be strictly controlled to assure end-product quality and enable the identification of the origin of defects caused by impurities or contamination. Six types of ceramic raw materials (silica sand, clays and kaolin, feldspars and related minerals, calcium and magnesium carbonates, sodium and calcium borates, and zirconium silicates) have been analysed in this study. X-ray fluorescence (XRF), potentiometry, coulometry and atomic absorption spectrometry (AAS) were used in this chemical characterisation. A methodology has been established for characterising each studied raw material, by identifying the chemical elements to be determined, selecting the most appropriate technique and validating each measurement. The reference materials used for validation were BCS CRM 267, 313/1, 393 and 388 (BAS), GBW 03103, GBW 07404, NIST SRM 181, 201a and 1835, Euronorm CRM 782-1 and Syenite SY-2. The results showed that most of the elements present in the geological samples used as traditional ceramic raw materials could be determined by XRF. The determination of light elements, such as lithium, fluorine and boron, is more suitably conducted by ICP-AES/AAS, potentiometry or potentiometry/ICP-AES respectively. Organic and inorganic carbon could be determined by coulometry. Inorganic carbon (CO₂) could also be determined by coulometry or by thermogravimetry, if samples did not contain clay minerals. Loss on ignition was always determined by gravimetry.     

Le magmatisme basique hercynien et post-hercynien du Système central espagnol : essai de caractérisation des sources mantelliques

Basic magmatism in central Spain occurred sporadically during a long period of ca. 140 Ma. The geochemical data on representative samples from the five igneous episodes show that different mantle reservoirs were tapped. Crustal involvement (via recycling in mantle sources or by hybridization at emplacement levels) was important in the basic magmas related to the Hercynian orogeny (Gb1 to Gb3 suites). Samples occurring as later dykes have signatures ranging from OIB-like values (Gb4 alkaline lamprophyres) to those of a formerly enriched subcontinental lithospheric mantle (tholeiites Gb5). To cite this article: C. Villaseca et al., C. R. Geoscience 336 (2004).     

Effect of Single Species or Mixed Algal (Chlorella vulgaris and Scenedesmus acutus) Diets on the Life Table Demography of Brachionus calyciflorus and Brachionus patulus (Rotifera: Brachionidae)

We tested the effect of two algal diets (Chlorella vulgaris at 1 · 10⁶ cells mL^?1and Scenedesmus acutus at 0.57 · 10⁶ cells mL^?1) offered alone or in combination (50 % each, 75 % or 25 % of either alga), at a total dry weight of 14.2 μg mL^?1on the life table demography of two rotifer species, Brachionus calyciflorus and Brachionus patulus. Data on fecundity indicated that, for any given algal food type or combination of food types, B. calyciflorus had a higher rate of offspring production than B. patulus. Regardless of the rotifer species, the average lifespan varied from 4 to 6 days. The gross and net reproductive rates were higher for B. calyciflorus than for B. patulus. These values ranged from 45 to 71 offspring female^?1 lifespan^?1 and 15 to 24 offspring female^?1 lifespan^?1, respectively, for B. calyciflorus. Generation times (around 4…5 days) were similar for both rotifer species in most of the treatments. Whatever the algal food combination, the rate of population increase (d^?1) of B. patulus was less than half (i.e. 45 %) of that for B. calyciflorus. The observed differences in the life history variables of Brachionus probably explain species‐specific adaptations to the changing phytoplankton composition occurring seasonally in natural waterbodies.     

Human Impact Since Medieval Times and Recent Ecological Restorationin a Mediterranean Lake: The Laguna Zoñar, Southern Spain

The multidisciplinary study of sediment cores from Laguna Zoñar (37°29′00′′ N, 4°41′22′′ W, 300 m a.s.l., Andalucía, Spain) provides a detailed record of environmental, climatic and anthropogenic changes in a Mediterranean watershed since Medieval times, and an opportunity to evaluate the lake restoration policies during the last decades. The paleohydrological reconstructions show fluctuating lake levels since the end of the Medieval Warm Period (ca. AD 1300) till the late 19th century and a more acute dry period during the late 19th century – early 20th century, after the end of the Little Ice Age. Human activities have played a significant role in Laguna Zoñar hydrological changes since the late 19th century, when the outlet was drained, and particularly in the mid-20th century (till 1982) when the spring waters feeding the lake were diverted for human use. Two main periods of increased human activities in the watershed are recorded in the sediments. The first started with the Christian conquest and colonization of the Guadalquivir River Valley (13th century) particularly after the fall of the Granada Kingdom (15th century). The second one corresponds to the late 19th century when more land was dedicated to olive cultivation. Intensification of soil erosion occurred in the mid-20th century, after the introduction of farm machinery. The lake was declared a protected area in the early 1980s, when some agricultural practices were restricted, and conservation measures implemented. As a consequence, the lake level increased, and some littoral zones were submerged. Pollen indicators reflect this limnological change during the last few decades. Geochemical indicators show a relative decrease in soil erosion, but not changes in the amount of chemical fertilizers reaching the lake. This study provides an opportunity to evaluate the relative significance of human vs. climatic factors in lake hydrology and watershed changes during historical times. Paleolimnological reconstructions should be taken into account by natural resources agencies to better define lake management policies, and to assess the results of restoration policies.     

On the advantage of sharing a holdfast: effects of density and occurrence of kin aggregation in the kelp Lessonia berteroana

We investigated the density‐dependent and genetic relatedness that regulate the occurrence of inter‐individual (genet) fusion forming plurigenotypic organisms in the brown alga Lessonia berteroana. Recruitment generally occurs at high densities in the inter‐tidal, allowing contact of neighbouring holdfasts as they grow and expand on the substrate. Algal density, by contrast, is regulated by the effects of herbivory and wave impact, which often lead to low holdfast density. Herein, we investigated whether the occurrence of plurigenotypic organisms and their genotypic composition (number of genotypes per plurigenotypic organism) are density dependent and affected by kin selection in the inter‐tidal kelp L. berteroana. Four microsatellite loci were used to analyse DNA from 260 samples obtained from shared and non‐shared holdfasts, at two sites with high and two site with low holdfast density. Analyses showed that fusions forming plurigenotypic organisms are extremely common. Interestingly, the frequency of fusions was higher in low‐density sites, in which 100% of the plants had at least two genotypes and the average was 3.5. In high‐density sites, 62% of plants were plurigenotypic, with an average of 2.8 genotypes per plant. Additionally, we found that genotypes that shared a holdfast had a significantly higher genetic relatedness than the average in the population, compatible with a kin structure. Density dependence and kin structure suggest that the occurrence of plurigenotypic organisms is linked to environmental quality, and that kin or multilevel selection may be favouring the fusion of genetically related genets.     

Validation of the WAMC4 wave model for the Black Sea

The present paper describes the set-up and application of the third-generation wave model — WAM Cycle 4 to the Black Sea. The wind fields are calculated by a regional atmosphere model (REMO), which was driven with the conditions from the global NCEP re-analysis project. These atmospheric data are used to force the state-of-the-art WAM model. The validation is done by comparison of wave model output against directional buoy measurements registered at three deep-water locations and wave gauge data taken at a point in intermediate depth near the Black Sea coast. The results reveal that agreement between modeled and measured data is satisfactory and the quality of the simulations increases under more energetic and severer wind and wave conditions. Following the validation, a 41-year wave hindcast was implemented spanning the period 1958–1998.     

High-Ti amphibole as a petrogenetic indicator of magma chemistry: evidence for mildly alkalic-hybrid melts during evolution of Variscan basic–ultrabasic magmatism of Central Iberia

Central Iberian Variscan granite batholiths and anatectic complexes are punctuated by coeval stocks of hydrous, high-K calc-alkaline, ultrabasic to intermediate rock series. Despite their overall calc-alkaline affinity, the mafic–ultramafic members contain high-Ti amphibole oikocrysts rimmed by lower-Ti amphibole ± cummingtonite and high-Ti amphibole replacing early phlogopite. To understand the factors controlling the saturation of high-Ti amphibole in the parental magmas, clinopyroxene-melt, phlogopite-melt and amphibole-melt relationships are reviewed. This analysis reveals that for melts with intermediate compositions, the affinity of TiO₂ for amphibole rises in alkalic magmas. Accordingly, mildly alkalic trachytoid to subalkaline medium- to high-K andesite and dacite compositions are estimated for interstitial high-Ti amphibole-saturated melts. Amphibole Ce/Pb ratios reveal a mantle–crust hybrid nature for interstitial melts with subalkaline trachytoid compositions. The hydrous character of the Variscan basic magmas favoured an overall magmatic evolutionary trend with a low rate of variation of Na₂O with respect to silica during amphibole crystallization. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.