Fatal landslides in Europe

Landslides are a major hazard causing human and large economic losses worldwide. However, the quantification of fatalities and casualties is highly underestimated and incomplete, thus, the estimation of landslide risk is rather ambitious. Hence, a spatio-temporal distribution of deadly landslides is presented for 27 European countries over the last 20  years (1995–2014). Catastrophic landslides are widely distributed throughout Europe, however, with a great concentration in mountainous areas. In the studied period, a total of 1370 deaths and 784 injuries were reported resulting from 476 landslides. Turkey showed the highest fatalities with 335. An increasing trend of fatal landslides is observed, with a pronounced number of fatalities in the latest period from 2008 to 2014. The latter are mostly triggered by natural extreme events such as storms (i.e., heavy rainfall), earthquakes, and floods and only minor by human activities, such as mining and excavation works. Average economic loss per year in Europe is approximately 4.7 billion Euros. This study serves as baseline information for further risk mapping by integrating deadly landslide locations, local land use data, and will therefore help countries to protect human lives and property.     

On the influence of RF absorbing material on the GNSS position

Reflections of the GNSS signal around the antenna induce an error in the measurement of the satellite–receiver distance and therefore should be avoided as much as possible. One solution often used to mitigate these reflections is to apply radio frequency (RF) absorbing material to the antenna, its support or its site. Such material could however alter the antenna phase delay and, in turn, alter the position as calculated from the GNSS observations. We explain under which conditions the RF material will or will not alter the antenna phase delay, and hence in which conditions a re-calibration of the antenna is necessary after the installation of absorbing material. Furthermore, rules of thumb are given to install the material in such a way that re-calibration can be avoided. Some basic theory and measurements of the influence of RF material are reviewed. An application to a real life absorber setup similar to one of the International GNSS Service reference stations is then discussed, and the position offset due to the absorbing material is demonstrated. The topics discussed can serve station managers to limit effects of absorbing material and take precautions to avoid a position bias.     

Groundwater temperature evolution in the subsurface urban heat island of Cologne,Germany

Long‐term heating of shallow urban aquifers is observed worldwide. Our measurements in the city of Cologne, Germany revealed that the groundwater temperatures found in the city centre are more than 5 K higher than the undisturbed background. To explore the role of groundwater flow for the development of subsurface urban heat islands, a numerical flow and heat transport model is set up, which describes the hydraulic conditions of Cologne and simulates the transient evolution of thermal anomalies in the urban ground. A main focus is on the influence of horizontal groundwater flow, groundwater recharge and trends in local ground warming. To examine heat transport in groundwater, a scenario consisting of a local hot spot with a length of 1 km of long‐term ground heating was set up in the centre of the city. Groundwater temperature‐depth profiles at upstream, central and downstream locations of this hot spot are inspected. The simulation results indicate that the main thermal transport mechanisms are long‐term vertical conductive heat input, horizontal advection and transverse dispersion. Groundwater recharge rates in the city are low (<100 mm a^?1) and thus do not significantly contribute to heat transport into the urban aquifer. With groundwater flow, local vertical temperature profiles become very complex and are hard to interpret, if local flow conditions and heat sources are not thoroughly known. Copyright © 2014 John Wiley & Sons, Ltd.     

Pollution and eutrophication history AD 1800–2005 as recorded in sediments from five lakes in Central Chile

One of the fundamental problems to quantifying past impact of anthropogenic activities is that long series of observational data for pollutant deposition and changes in the nutrient cycling of ecosystems (eutrophication) are often not available. Lake sediments may provide suitable archives to decipher the history of local and regional pollution and eutrophication.Here we provide quantitative high-resolution data for the history of airborne pollutants and eutrophication from sediments of five lakes in Central Chile between ca. AD 1800–2005. We use spheroidal carbonaceous particles (SCPs) from fossil fuel combustion and excess atmospheric Cu deposition from mining activities as a proxy for atmospheric deposition. Organic carbon and nitrogen flux rates to the sediments and C/N ratios are used as a proxy for aquatic primary production and eutrophication.We show that the lake sediment SCP and Cu records are highly consistent and depict in great detail the local and regional history of urban, industrial and transportation history as reported in independent documentary sources and statistics. The pre-industrial and pre-1950 background concentrations (and flux rates) of the substances can be quantified. We can also show that technical measures taken in the early 1980s to trim down Cu emissions from the copper mines reduced the excess atmospheric Cu fallout to the lakes by about 50%.Eutrophication of the lakes did not start before ca. 1980. Prior to that time, warm season temperatures explain most of the variance in TOC and N flux to the sediments. The three dimictic lakes show only moderate eutrophication responses to enhanced N supply (as atmospheric fallout; enrichment factors for TOC and N 1.1–2.6), suggesting that mainly phosphorus controls aquatic primary production. The meromictic lake, where phosphorus recycling is likely, shows the largest response (enrichment factors for TOC and N between 9–20).While all five lakes show overall consistent and similar trends for the pollution history during the 19th and 20th century, there are significant differences in the details of the individual profiles. This suggests that local sources are highly important and the common regional (background) signal is relatively marginal. This is very different from Europe.     

Neolithic Lakeshore Settlements in Switzerland: New Insights on Site Formation Processes from Micromorphology

Lakeside settlements can be regarded as a special type of archaeological site, as, thanks to their location near the shoreline, or even in the lake, various kinds of organic remains have been preserved under waterlogged conditions. This paper presents the results of six‐studied Neolithic lake dwellings from Switzerland. A series of natural and anthropogenic site formation processes were identified through micromorphological analysis and have been compared with natural processes in peatlands. The main processes can be summarized as follows: in the littoral zone a carbonate lake marl stratum accumulated prior to construction of the settlement. During lake regressions, the shore platform became dry and the settlements were established. Throughout the period of occupation, anthropogenic processes led to the accumulation of organic layers. The depositional regime can be characterized as paludal, dominated by constant humidity, and rapid covering of the remains. Some parts of the anthropogenic accumulations have been affected by erosion and reworking processes as a result of lake flooding, and runoff from the hinterland. Finally, the degradation of organic matter occurred only during dry phases when the groundwater level dropped. Seasonality was of great importance in this kind of milieu throughout the various processes described above. © 2013 Wiley Periodicals, Inc.     

Eemian landscape response to climatic shifts and evidence for northerly Neanderthal occupation at a palaeolake margin in northern Germany

The prevailing view suggests that the Eemian interglacial on the European Plain was characterized by largely negligible geomorphic activity beyond the coastal areas. However, systematic geomorphological studies are sparse. Here we present a detailed reconstruction of Eemian to Early Weichselian landscape evolution in the vicinity of a small fingerlake on the northern margin of the Salzwedel Palaeolake in Lower Saxony (Germany). We apply a combination of seismics, sediment coring, pollen analysis and luminescence dating on a complex sequence of colluvial, paludal and lacustrine sediments. Results suggest two pronounced phases of geomorphic activity, directly before the onset and at the end of the Eemian period, with an intermediate period of pronounced landscape stability. The dynamic phases were largely driven by incomplete vegetation cover, but likely accentuated by fluvial incision in the neighbouring Elbe Valley. Furthermore, we discovered Neanderthal occupation at the lakeshore during Eemian pollen zone (PZ) E IV, which is chronologically in line with other known Eemian sites of central Europe. Our highly-resolved spatio-temporal data substantially contribute to the understanding of climate-induced geomorphic processes throughout and directly after the last interglacial period. It helps unraveling the landscape dynamics between the coastal areas to the north and the loess belt to the south.     

Untersuchungen über Gletscherstruktur und Gletscherbewegung

Ohne Zusammenfassung     

Heuristic numerical and analytical models of the hydrologic controls over vertical solute transport in a domed peat bog,Jura Mountains,Switzerland

We report the results of numerical and analytical simulations to test the hypothesis that downward vertical flow of porewater from the crests of domed alpine and kettle bogs controls vertical porewater distributions of major solutes such as Ca and Mg. The domed Etang de la Gruère bog (EGr), Switzerland, characterized by a vertical downward gradient of 0·04 and stratified layers of peat, is chosen as a field site for the model calibration and evaluation. The middle 4‐m section of the 6·5 m thick bog peat is heavily humified and has a hydraulic conductivity of ～10^?5·6 cm s^?1. Above and below, peat is less humified with a hydraulic conductivity of ～10^?3 cm s^?1. Heuristic finite difference simulations, using Visual MODFLOW, of the bog hydraulics show that the higher conductivity peat at the bog base is critical to create the observed deep, local flow cells that substantively recharge porewater. Model results and Peclet number calculations show that before ～7000 ¹⁴C yr BP diffusion of solutes from underlying mineral soils controlled the vertical distribution of porewater chemistry. From 7000 to ～1250 ¹⁴C BP the porewater chemistry was probably controlled by both upward diffusion and downward advection, and after ～1250 ¹⁴C yr BP porewater chemistry was probably controlled by downward advection. Concentrations of conservative major solutes in the porewaters of alpine, ombrotrophic bogs are the net effect of both downward vertical porewater movement and upward vertical diffusion, the magnitudes of which are delicately poised to the configuration of the bog water table over time and subsurface peat stratigraphy. Copyright © 2002 John Wiley & Sons, Ltd.     

Time-domain sparsity promoting least-squares reverse time migration with source estimation

Least-squares reverse-time migration is well known for its capability to generate artefact-free true-amplitude subsurface images through fitting observed data in the least-squares sense. However, when applied to realistic imaging problems, this approach is faced with issues related to overfitting and excessive computational costs induced by many wave-equation solves. The fact that the source function is unknown complicates this situation even further. Motivated by recent results in stochastic optimization and transform-domain sparsity promotion, we demonstrate that the computational costs of inversion can be reduced significantly while avoiding imaging artefacts and restoring amplitudes. While powerful, these new approaches do require accurate information on the source-time function, which is often lacking. Without this information, the imaging quality deteriorates rapidly. We address this issue by presenting an approach where the source-time function is estimated on the fly through a technique known as variable projection. Aside from introducing negligible computational overhead, the proposed method is shown to perform well on imaging problems with noisy data and problems that involve complex settings such as salt. In either case, the presented method produces high-resolution high-amplitude fidelity images including an estimate for the source-time function. In addition, due to its use of stochastic optimization, we arrive at these images at roughly one to two times the cost of conventional reverse-time migration involving all data.     

ISOPHOT S Observations of 3 M Dwarfs

The M dwarfs GL 832 (spectral type M2), GL 887 (M1), and GL 1 (M2) have been observed with the ISOPHOT spectrophotometers in the range 2.5-12μm at high signal-to-noise ratios. Since optical and ground based near-infrared data are also available, more than 95 % of the total flux is now covered for these objects. It is seen that between 2.5 μm and about 9 μm the fluxes fall off faster than a Rayleigh-Jeans tail of a black body distribution and that for longer wavelengths the decline is smaller. This indicates that the ISO data are probing the region around the temperature minimum and that our stars have some kind of chromosphere although Hα emission is not observed. Comparison with a model indicates that the features are considerably weaker than predicted. This revised version was published online in August 2006 with corrections to the Cover Date.