Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Estimating urban above ground biomass with multi-scale LiDAR

Background

Urban trees have long been valued for providing ecosystem services (mitigation of the “heat island” effect, suppression of air pollution, etc.); more recently the potential of urban forests to store significant above ground biomass (AGB) has also be recognised. However, urban areas pose particular challenges when assessing AGB due to plasticity of tree form, high species diversity as well as heterogeneous and complex land cover. Remote sensing, in particular light detection and ranging (LiDAR), provide a unique opportunity to assess urban AGB by directly measuring tree structure. In this study, terrestrial LiDAR measurements were used to derive new allometry for the London Borough of Camden, that incorporates the wide range of tree structures typical of an urban setting. Using a wall-to-wall airborne LiDAR dataset, individual trees were then identified across the Borough with a new individual tree detection (ITD) method. The new allometry was subsequently applied to the identified trees, generating a Borough-wide estimate of AGB.

Results

Camden has an estimated median AGB density of 51.6 Mg ha^–1 where maximum AGB density is found in pockets of woodland; terrestrial LiDAR-derived AGB estimates suggest these areas are comparable to temperate and tropical forest. Multiple linear regression of terrestrial LiDAR-derived maximum height and projected crown area explained 93% of variance in tree volume, highlighting the utility of these metrics to characterise diverse tree structure. Locally derived allometry provided accurate estimates of tree volume whereas a Borough-wide allometry tended to overestimate AGB in woodland areas. The new ITD method successfully identified individual trees; however, AGB was underestimated by ≤?25% when compared to terrestrial LiDAR, owing to the inability of ITD to resolve crown overlap. A Monte Carlo uncertainty analysis identified assigning wood density values as the largest source of uncertainty when estimating AGB.

Conclusion

Over the coming century global populations are predicted to become increasingly urbanised, leading to an unprecedented expansion of urban land cover. Urban areas will become more important as carbon sinks and effective tools to assess carbon densities in these areas are therefore required. Using multi-scale LiDAR presents an opportunity to achieve this, providing a spatially explicit map of urban forest structure and AGB.

     

LA‐ICP‐MS Pb isotope test of meteorite provenance: A terrestrial origin for Lovina

Lovina, classified as an ungrouped ataxite, is controversial and its identity as a meteorite has been questioned. In this work, we use Pb isotopes on targeted troilite nodules in Lovina as a test of its antiquity and provenance. Although precise ages cannot be obtained, LA‐ICP‐MS offers a rapid, straightforward procedure to establish the source of lead, whether ancient (meteoritic) or modern (terrestrial). For nine pristine, unweathered nodules in Lovina, we find a lead isotopic composition of: ²⁰⁶Pb/²⁰⁸Pb = 0.492 ± 0.003 (2σ, MSWD 0.79; 95%) and ²⁰⁷Pb/²⁰⁶Pb = 0.852 ± 0.003 (2σ, MSWD 1.09; 95%) with no detectable uranium. All lead compositions of the troilite fall in the range expected for modern environmental and mantle lead and are distinctly different from the primordial Canyon Diablo Troilite (CDT) composition of ancient meteoritic troilite. Although the origin of Lovina remains unknown, we conclude that lead in the Lovina troilite is unsupported by U decay and originated from a terrestrial source.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

Seasonal changes in community composition and trophic structure of fish populations of five salt marshes along the Essex coastline, United Kingdom

European intertidal salt marshes are important nursery sites for juvenile fish and crustaceans. Due to the increasing threat of habitat loss, the seasonal changes of salt marsh fish communities need to be understood in order to appreciate the ecological and economic importance of the saltmarsh habitat. This study was the first in Great Britain to investigate the seasonal changes of salt marsh fish communities and the variation in community structure between closely located marsh habitats. Between February 2007 and March 2008, five marshes on three estuaries of the Essex coastline were sampled using flume nets to block off intertidal creeks at high tide. Fourteen fish species were caught. The community overall was dominated by three species that made up 91.6% of the total catch: the common goby Pomatoschistus microps (46.2% of the total catch), juvenile herring Clupea harengus (24.3%), and juvenile and larval sea bass Dicentrarchus labrax (21.2%). Cluster analysis demonstrated clear seasonal patterns, with some community structures unique to specific marshes or estuaries. The marsh fish community shifts from a highly diverse community during spring, to a community dominated by D. labrax and P. microps in autumn, and low diversity during winter months. Gravimetric stomach content analysis of fish community identified three main trophic guilds; macroinvertivores, planktivores and omnivores. The macroinvertivore feeding guild contained D. labrax and P. microps, the two most frequently occurring species. This investigation demonstrates the importance of British salt marshes as nursery habitats for commercial fish species.     

Shapes of chondrules determined from the petrofabric of the CR2 chondrite NWA 801

The approximately spherical shapes of chondrules has long been attributed to surface tension acting on ~1 mm melt droplets that formed and cooled in the microgravity field of the solar nebula. However, chondrule shapes commonly depart significantly from spherical. In this study, 109 chondrules in a sample of CR2 chondrite NWA 801 were imaged by X-ray computed tomography and best-fitted to ellipsoids. The analysis confirms that many chondrules are indeed not spherical, and also that the chondrules’ collective shape fabric records a definite 13% compaction in the host meteorite. Dehydration of phyllosilicates within chondrules may account for that strain. However, retro-deforming all chondrules shows that a large majority were already far from spherical prior to accretion. Possible models for these initial shapes include prior deformation of individual chondrules in earlier hosts, and, as suggested by previous authors, rotation of chondrules as they were solidifying, and/or “streaming” of molten chondrules by their differential velocities with their gaseous hosts after melting. More in situ 3-D work such as this study on a variety of unequilibrated chondrites, combined with detailed structural petrography, should help further constrain these models and refine our understanding of chondrite formation.     

Market access,population density,and socioeconomic development explain diversity and functional group biomass of coral reef fish assemblages

There is overwhelming evidence that many local-scale human activities (e.g. fishing) have a deleterious effect on coral reef fish assemblages. Our understanding of how broad social phenomena (e.g. socioeconomic development) affect the diversity and function of coral reef fish assemblages however, is still poor. Here, we use structural equation models to reveal how human population density, socioeconomic development, and market access affect fishing pressure and coral cover to, in turn, explain the diversity and biomass of key functional groups of reef fish assemblages within Solomon Islands. Fishing pressure is predominantly driven by both market access and local population density, and has a clear negative effect on the diversity and function of coral reef fishes. The strong positive effect of market access on fishing pressure makes clear the importance of understanding social-ecological linkages in the context of increasingly connected societies. This study highlights the need to address broad social phenomena rather than focusing on proximate threats such as fishing pressure, to ensure the continued flow of coral reef goods and services in this time of rapid global social and environmental change.