Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

Estimation of Surface-Layer Scaling Parameters in the Unstable Boundary Layer: Implications for Orographic Flow Speed-Up

A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer.     

GPS Water Vapor and Its Comparison with Radiosonde and ERA-Interim Data in Algeria

Remote sensing of atmospheric water vapor using global positioning system(GPS) data has become an effective tool in meteorology,weather forecasting and climate research. This paper presents the estimation of precipitable water(PW)from GPS observations and meteorological data in Algeria,over three stations located at Algiers,Bechar and Tamanrasset.The objective of this study is to analyze the sensitivity of the GPS PW estimates for the three sites to the weighted mean temperature(T_m),obtained separately from two types of T_m–T_s regression [one general,and one developed specifically for Algeria(T_s stands for surface temperature)],and calculated directly from ERA-Interim data. The results show that the differences in T_m are of the order of 18 K,producing differences of 2.01 mm in the final evaluation of PW. A good agreement is found between GPS-PW and PW calculated from radiosondes,with a small mean difference with Vaisala radiosondes.A comparison between GPS and ERA-Interim shows a large difference(4 mm) in the highlands region. This difference is possibly due to the topography. These first results are encouraging,in particular for meteorological applications in this region,with good hope to extend our dataset analysis to a more complete,nationwide coverage over Algeria.     

The impacts of a plume-rise scheme on earth system modeling: climatological effects of biomass aerosols on the surface temperature and energy budget of South America

Theoretical and Applied Climatology - Seasonal forest fires in the Amazon are the largest source of pollutants in South America. The impacts of aerosols due to biomass burning on the temperature...     

The influence of elevation on soil properties and forest litter in the Siliceous Moncayo Massif,SW Europe

Understanding the effects of elevation and related factors (climate, vegetation) on the physical and chemical soil properties can help to predict changes in response to future climate or afforestation forcings. This work aims to contribute to the knowledge of soil evolution and the classification of forest soils in relation to elevation in the montane stage, with special attention to podzolization and humus forms. The northern flank of the Moncayo Massif (Iberian Range, SW Europe) provides a unique opportunity to study a forest soils catena within a consistent quartzitic parent material over a relatively steep elevation gradient. With increasing elevation, pH, base saturation, exchangeable potassium, and fine silt-sized particles decrease significantly, while organic matter, the C/N ratio, soil aggregate stability, water repellency and coarse sand-sized particles increase significantly. The soil profiles shared a set of properties in all horizons: loamy-skeletal particle-size, extreme acidity (pH-H₂O<5.6) and low base saturation (<50%). The most prevalent soil forming processes in the catena include topsoil organic matter accumulation and even podzolization, which increases with elevation. From the upper to lower landscape positions of wooded montane stage of the Moncayo Massif, mull-moder-mor humus and an Umbrisol-Cambisol-Podzol soil unit sequences were found.     

Quaternary charophytes from Salina del Bebedero, Argentina: their relation with extant taxa and palaeolimnological significance

Charophyte (Charales, green macroscopic algae) assemblages found in Quaternary shoreline sediments from Salina del Bebedero, Argentina, are described in detail, illustrated, and statistically analysed. Fossil gyrogonites, Late Pleistocene and Holocene in age, of Chara cf. hispida var. major (Hartman) Wood, Chara halina García, Chara hornemannii Wallmann, Chara bulbillifera (Donterberg) García, Lamprothamnium haesseliae Donterberg and Lamprothamnium succinctum (Braun ex Ascherson) Wood were identified. A comparison with extant charophyte species of similar ecological requirements allowed for an accurate systematical determination and provided useful data for complementary palaeoecological and palaeobiogeographical approaches. On this basis, a reconstruction of palaeo-salinities for the Salina del Bebedero lake, represented by eleven palaeo-beaches, is proposed. Also the associations of charophytes with the ostracods Cyprideis sp., Limnocythere sp., Pampacythere sp., Cypridopsis sp., Darwinula sp., Ilyocypris gibba (Randohr) Brady and Norman, and the foraminifers Ammonia sp., Elphidium gunteri Cole, Quinqueloculina sp., and one species of Discorbacea are analysed, since they are present in both the fossil and modern environments.     

Zn, Pb, Cu and As distribution patterns in overbank and medium-order stream sediment samples: their use in exploration and environmental geochemistry

Overbank and medium-order stream sediment samples were collected in Belgium and Luxembourg from 66 sampling locations (area of about 33,000 km²) and analysed for major and trace elements among which Zn, Pb, Cu and As. At each sampling location large bulk samples were taken, namely in the lower (normally at ≥1.5 m depth, over an interval of about 20–40 cm) and upper (normally upper 5–25 cm) parts of the overbank profiles and from the stream sediments. Furthermore, at a number of these sites, a detailed geochemical analysis of vertical overbank sediment profiles (sampling intervals of 10–20 cm) was subsequently carried out to unravel element variations through time and to help in the overall evaluation. For most sampled sections evidences such as ¹⁴C-dating and the absence of anthropogenic particles point towards a pre-industrial and often pristine origin of the lower overbank sediment samples. From the latter bulk samples, mean background concentrations were deduced. They reveal the existence of significant differences between the northern and southern part of Belgium (incl. Luxembourg) which relate to the difference in geological substrate. In the north dominantly non-lithified Quaternary and Tertiary sands, marls and clays occur while in the south Palaeozoic sandstones, shales and carbonate rocks outcrop. Consequently separate mean background values were calculated for the two areas. In the southern study area, some anomalous metal concentrations have been recorded in pre-industrial sediments. They are derived from mineralised Palaeozoic rocks, a feature which could be of interest for base metal exploration. In the upper overbank and stream sediments, in general, higher heavy metal and As contents were recorded with highest values in areas with metal mining, metal melting and cokes treatment industries. By comparing the trace element concentrations of the upper overbank or stream sediment samples with the concentrations detected in the lower overbank samples at each of the sampling locations, and by evaluating the vertical distribution patterns where available, the degree of pollution of the alluvial plain and the present-day stream sediments can be assessed. From this exercise, it is clear that highest pollution occurs in the northern part of Belgium, which relates to its high population density and industrial development.