High-density CO2−N2 inclusions in eclogite-facies metasediments of the Münchberg gneiss complex,SE Germany

The eclogite-facies metasedimentary rocks in the Münchberg gneiss complex (T=630±30° C/P17–24 kbar) locally contain CO₂–N₂-rich fluid inclusions of extremely low molar volumes (32 cm³/mol) in quartz. These fluid compositions are mainly found in rocks intercalated with calcsilicate bands. Densities were determined from low-temperature phase transitions like stable or metastable homogenization (L+VL), partial homogenization (S+L+VS+L) and the transition S+LL (L = liquid, V = vapour, S = solid). The high fluid densities are in agreement with eclogite-facies pressure and temperature and subsequent amphibolite facies. CO₂–N₂ inclusions were not observed in adjacent eclogites nor in non-calcareous metasediments. These rock types contain predominantly H₂O-rich inclusions correlating with amphibolite-facies conditions. The variation of fluid composition with lithological differences indicates local fluid gradients and speaks against a pervasive fluid flow during eclogite-facies metamorphism.     

The structure of the broad line region in Fairall 9

We find that the profile changes observed for the UV emission lines L,Civ 1549, and MgIII 2798, in the Seyfert 1 galaxy Fairall 9 occur mainly near the line centre for L andCiv and in the wings for MgIII. These results indicate that the broad line region (BLR) has a complex structure, possibly with non-spherical components.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Surface-layer flow in complex terrain: Comparison of models and full-scale observations

Four models of surface boundary-layer flow in complex terrain are compared with observations made at Blashaval Hill, North Uist, Scotland. The field experiment is described by Mason and King (1985). Three of the models are derived from the two-dimensional theory of Jackson and Hunt (1975) and are described in Mason and King (1985), Walmsley et al. (1986) and Troen and Petersen (1989). The fourth is a mass-consistent code based on Traci et al. (1979). The model results are in good agreement with each other and are generally within the observed range of variation ( ~ ± 16%) in normalized wind speed. For most wind direcions (7 of 11), model results of normalized wind speed at the summit were within 7% of the observed mean values. For some wind directions, calculations using the Guidelines of Walmsley et al. (1989) suggested that variations in surface roughness were important. This led us to apply one of our models incorporating nonuniform surface roughness. The lack of significant improvement for cases when water lay upstream of Blashaval Hill is attributed to compensating changes at summit and reference sites and to very local effects on the wind data. Sensitivity to topography lying to the west and northwest of Blashaval was also investigated. Results suggested an influence from those distant topographic features for some wind directions. When those features were incorporated, maximum errors in normalized wind speed at the summit were reduced from 18 to 13%.     

Hydrocarbons in surficial sediments from the Scotian Shelf

Surface sediments from 20 stations on the Scotian Shelf, collected on a transect from Halifax to Emerald Bank and around Sable Island, have been analyzed for hydrocarbon content and composition by gas chromatography and fluorescence spectrophotometry. Some samples were taken near abandoned exploratory drilling sites in the Sable Island area. Hydrocarbons appear to be mainly derived from biogenic terrestrial sources as evidenced by an inverse correlation of concentration with increasing distance from the mainland and a strong odd carbon preference in the n-alkanes. Contribution from petroleum sources, while minor, was most noticeable between Halifax and Emerald Bank. There is also evidence that the hydrocarbon composition at abandoned exploratory drilling sites has been slightly altered.     

Amino acid composition of organic matter associated with carbonate and non-carbonate sediments

Amino acids comprise from 15 to 36% by weight of humic substances from carbonate and non-carbonate sediments. Humic and fulvic acids extracted from carbonate sediments are characterized by an amino acid composition consisting primarily of the acidic amino acids, aspartic and glutamic acid. Humic substances from non-carbonate sediments have a distinctly different amino acid composition consisting primarily of glycine and alanine. Amino acid analyses of various molecular weight fractions of fulvic acids extracted from carbonates show that lower molecular weight fractions have appreciably higher relative abundances of the acidic amino acids compared to higher molecular weight fractions. Based on typical values for carboxyl group content in humic substances, acidic amino acids may be a significant contributor of these functional groups. Carbonate surfaces appear to selectively adsorb aspartic acid-enriched organic matter while non-carbonates do not have this property.     

Rare-earth abundances in kimberlites from Greenland and Zambia

Ten rare-earth elements (La, Ce, Nd, Sm, Eu, Gd, Tb, Tm, Yb and Lu) and Ta, Th and Hf contents in eight kimberlites and inclusions from Greenland and Zambia have been determined by instrumental neutron activation. All the samples have highly fractionated rare-earth (REE) distribution patterns. La/Yb ratios in the Greenland kimberlites (hypabyssal facies) vary from 111.8 to 188.4, and the total rare-earth contents range from 204.8 to 380.3 ppm. No europium anomaly is present. The Zambian kimberlites (diatreme facies) are altered and carbonated. Rare-earth patterns in these are also light REE-enriched. A significant difference is shown to exist between the diatreme and hypabyssal facies of kimberlites.     

An experimental study of anorthosite dissolution in lunar picritic magmas: Implications for crustal assimilation processes

Experiments characterizing the kinetics of anorthosite dissolution in lunar picritic magmas (very low-Ti, low-Ti, and high-Ti picritic glasses) were conducted at 0.6 GPa and 1250-1400 °C using the dissolution couple method. Reaction between the anorthosite and lunar picritic magmas at 1250-1300 °C produced a spinel + melt layer. Reaction between the anorthosite and an olivine-saturated low-Ti magma at 1250-1300 °C produced a crystal-free region between the spinel + melt layer and the olivine-saturated magma. The anorthosite dissolution experiments conducted at 1400 °C simply dissolved anorthosite and did not result in a crystal-bearing region. The rate of anorthosite dissolution strongly depends on temperature and composition of the reacting melt. Concentration profiles that develop during anorthosite dissolution are nonlinear and extend from the picritic glass compositions to anorthite. These profiles feature a large and continuous variation in melt density and viscosity from the anorthosite-melt interface to the initial picritic magmas. In both the low-Ti and high-Ti magmas the diffusive fluxes of TiO₂, Al₂O₃, and SiO₂ are strongly coupled to the concentration gradients of CaO and FeO. Anorthosite dissolution may play an important role in producing the chemical variability of the lunar picritic magmas, the origin of spinel in the lunar basalts and picritic glasses, and the petrogenesis of the high-Al basalts.     

Acid leaching of ash and coal: Time dependence and trace element occurrences

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.     

An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.