Estimation of carbon stock for greenhouse gas emissions from hydropower reservoirs

The identification and accurate quantification of sources or sinks of greenhouse gas (GHG) have become a key challenge for scientists and policymakers working on climate change. The creation of a hydropower reservoir, while damming a river for power generation, converts the terrestrial ecosystems into aquatic and subsequently aerobic and anaerobic decomposition of flooded terrestrial soil organic matter resulting in the emission of significant quantity of GHG to the atmosphere. Tropical/subtropical hydropower reservoirs are more significant sources of GHG compared to boreal or temperate one. This paper aims to estimate the emission factor (gCO₂eq./kWh) and net GHG emission from Koteshwar hydropower reservoir in Uttarakhand, India. Further, estimated GHG are compared with those from global reservoirs located in the same eco-region so that its impact could be timely minimized/mitigated. Results have shown that emission factor and net GHG emission of Koteshwar reservoir are, respectively, estimated as 13.87 gCO₂eq./kWh and 167.70 Gg C year^?1 which are less than other global reservoirs located in the same eco-region. This information could be helpful for the hydropower industries to construct reservoirs in tropical eco-regions.     

Variations of trace gases over the Bay of Bengal during the summer monsoon

In situ measurements of near-surface ozone (\(\hbox {O}_{3})\), carbon monoxide (CO), and methane (\(\hbox {CH}_{4})\) were carried out over the Bay of Bengal (BoB) as a part of the Continental Tropical Convergence Zone (CTCZ) campaign during the summer monsoon season of 2009. \(\hbox {O}_{3}\), CO and \(\hbox {CH}_{4}\) mixing ratios varied in the ranges of 8–54 ppbv, 50–200 ppbv and 1.57–2.15 ppmv, respectively during 16 July–17 August 2009. The spatial distribution of mean tropospheric \(\hbox {O}_{3}\) from satellite retrievals is found to be similar to that in surface \(\hbox {O}_{3}\) observations, with higher levels over coastal and northern BoB as compared to central BoB. The comparison of in situ measurements with the Monitoring Atmospheric Composition & Climate (MACC) global reanalysis shows that MACC simulations reproduce the observations with small mean biases of 1.6 ppbv, –2.6 ppbv and 0.07 ppmv for \(\hbox {O}_{3}\), CO and \(\hbox {CH}_{4}\), respectively. The analysis of diurnal variation of \(\hbox {O}_{3}\) based on observations and the simulations from Weather Research and Forecasting coupled with Chemistry (WRF-Chem) at a stationary point over the BoB did not show a net photochemical build up during daytime. Satellite retrievals show limitations in capturing \(\hbox {CH}_{4}\) variations as measured by in situ sample analysis highlighting the need of more shipborne in situ measurements of trace gases over this region during monsoon.     

On radiative forcing of sulphate aerosol produced from ion-promoted nucleation mechanisms in an atmospheric global model

A significant fraction of the total number of particles present in the atmosphere is formed by nucleation in the gas phase. Nucleation and the subsequent growth process influence both number concentration of particles and their size distribution besides chemical and optical properties of atmospheric aerosols. Sulphate aerosol nucleation mechanisms promoted by ions have been evaluated here in a tropospheric interactive chemistry-aerosol module for mass and number concentration in a global atmospheric model. The indirect radiative forcing of sulphate particles is assessed in this model; indirect radiative forcing is different for ion-induced (IIN) and ion-mediated (IMN) mechanisms. The indirect radiative forcing in 10-year simulation runs has been calculated as ?1.42?W/m² (IIN) and ?1.54?W/m² (IMN). The 5% emission of primary sulphate particles in simulations changes the indirect radiative forcing from ?1.42 to ?1.44?W/m² for IIN case, and from ?1.54 to ?1.55 W/m² for the IMN case. More precisely, owing to greater nucleation rates, IMN mechanisms produces greater cooling than the IIN mechanisms in the backdrop that both mechanisms produce almost identical distribution of CDNC in their pre-industrial runs. The inclusion of primary particles in simulations with IIN and IMN mechanisms increases both CDNC and the indirect radiative forcing.     

Automatic mapping of lunar landforms using DEM-derived geomorphometric parameters

Developing approaches to automate the analysis of the massive amounts of data sent back from the Moon will generate significant benefits for the field of lunar geomorphology. In this paper, we outline an automated method for mapping lunar landforms that is based on digital terrain analysis. An iterative self-organizing (ISO) cluster unsupervised classification enables the automatic mapping of landforms via a series of input raster bands that utilize six geomorphometric parameters. These parameters divide landforms into a number of spatially extended, topographically homogeneous segments that exhibit similar terrain attributes and neighborhood properties. To illustrate the applicability of our approach, we apply it to three representative test sites on the Moon, automatically presenting our results as a thematic landform map. We also quantitatively evaluated this approach using a series of confusion matrices, achieving overall accuracies as high as 83.34% and Kappa coefficients (K) as high as 0.77. An immediate version of our algorithm can also be applied for automatically mapping large-scale lunar landforms and for the quantitative comparison of lunar surface morphologies.     

利用大地电磁资料对玄武岩成像的可行性

The magnetotelluric （MT） method has been among the favorite supporting tools for seismic imaging of sub-salt and sub-basalt targets. In this paper we present an example from Kachchh, India （where basaltic rocks overlie Mesozoic sedimentary rocks）, and discuss the feasibility of using MT method as an exploration tool in this geological setting. Our results highlight the difference in magnetotelluric response caused by the thin intrabasalt layering. The key issue addressed in this paper is what MT can and cannot provide in such geological settings. First, we compute apparent resistivity and phase response curves using representative resistivity-depth models and borehole data from the study area. Later, we compare these results to assess the plausibility of using MT to image the sub-volcanic sediments at Kachchh. Finally, we substantiate our discussion through one-dimensional inversion of the field observed MT data from this region that exhibits poor sensitivity of MT for thin basalt layers.     

Ferromanganese crusts from submarine volcanoes of backarc basins as a new genetic type of gallium deposits

Study of the material composition of Fe-Mn crusts from submarine rises in the central part of the Sea of Japan, with modern precision methods applied, has yielded a high (up to 854 g/t) concentration of gallium contained in sorbed form. The new data obtained have allowed a new genetic type of gallium deposits—hydrothermal-sedimentary—to be distinguished.     

Rate of collisional deformation in Kamchatsky Peninsula,Kamchatka

Detailed data are discussed on the rate of Holocene horizontal and vertical movements along a fault in the southeastern Kamchatsky Peninsula, which is situated between the converging Aleutian and Kamchatka island arcs. The fault is the northern boundary of the block invading into the peninsula under pressure of the Komandorsky Block of the Aleutian arc. The rate of right-lateral slip along the fault was increasing in the Holocene and reached 18–19 mm/yr over the last 2000 years and 20 mm/yr by contemporary time. Comparison of these estimates with those that follow from offsets of older rocks also indicates acceleration of horizontal movements along the fault from the early Quaternary to the present. The results obtained from rates of GPS station migration show that about half the rate of the northwestern drift of the Komandorsky Block is consumed for movement of the block of the southern side of the fault. The remainder of movement of the Komandorsky Block is consumed for movements (probably, underthrusting) at the eastern continental slope of the Kamchatsky Peninsula.     

Consideration of the interaction between dam and bedrock in a coupled mechanic-hydraulic FE-program

Summary The behaviour of existing dams and some accidents have shown the great importance of the interaction between dam and bedrock with respect to mechanic and hydraulic effects.The mechanic and hydraulic properties of a fissured rock mass are mainly determined by the discontinuities. When their opening widths change due to stresses, the permeability is affected. This causes alterations in the piezometric head distribution which again affect the state of stress.The paper presents a new concept to take into account the mechanic-hydraulic interaction in a 3-dimensional Finite-Element-program. The concept is illustrated by an example (gravity dam).     

A rapid-response 2-D drag anemometer for atmospheric turbulence measurements

A rapid response drag anemometer for measuring streamwise and lateral components of horizontal windspeed is described. Theory of operation, design and calibration are discussed with emphasis on the electronic preconditioning of signals and problems associated with using a mechanically resonant system as a sensor. Field comparisons showed half-hourly means and standard deviations of the streamwise component to be within 8% and 5% of respective values obtained from a 3-dimensional sonic anemometer. The lateral component from the drag anemometer was significantly more noisy than that from the 3-D sonic due to induced oscillations arising from vortex shedding. After mechanical and electronic filtering, half-hourly standard deviation comparisons agreed to within 6% for this component. Friction velocities obtained from the drag anemometer in combination with a 1-D sonic, agreed with measurements from the 3-D sonic anemometer to within 4% over a measured range of 0.05 to 1.2 m s^-1