Small inflation sources producing seismic and infrasonic pulses during the 2000 eruptions of Miyake-jima, Japan

During the 2000 activity of Miyake-jima volcano, Japan, we detected long period seismic signals with initial pulse widths of 1-2 s, accompanied by infrasonic pulses with almost the same pulse widths. The seismic signals were observed from 13 July 2000, a day before the second summit eruption. The occurrences of the seismic signals were intermittent with a gradual increase in their magnitudes and numbers building toward a significant explosive eruption on 18 August. After the eruption, the seismic and infrasonic events ceased. The results of a waveform inversion show that the initial motions were excited by an isotropic inflation source beneath the south edge of the caldera at a depth of 1.4 km. On the other hand, the sources of the infrasonic pulses were located in the summit caldera area. The times at which the infrasonic pulses were emitted at the surface were delayed by about 3 s from the origin times of the seismic events. It is suggested that small isotropic inflations excited seismic waves in the crust and simultaneously caused acoustic waves that traveled in the conduit and produced infrasonic pulses at the crater bottom. Considering the observed time differences and gas temperatures emitted from the vent, the conduit should have been filled with vapor mixed with SO₂ gas and volcanic ash. The change of the time differences between the seismic and infrasonic signals suggests that the seismic source became shallower within half a day before the August 18 explosive eruption. We interpret the source process as a fragmentation process of magma in which gas bubbles burst and quickly released part of the pressure that had been sustained by the tensional strength of magma.     

Cathodoluminescence of high-pressure feldspar minerals as a shock barometer

Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.     

Determination of Chromium, Nickel, Copper and Zinc in Milligram Samples of Geological Materials Using Isotope Dilution High Resolution Inductively Coupled Plasma-Mass Spectrometry

A simple and accurate method for the determination of Cr, Ni, Cu and Zn at μg g^?1 levels in milligram‐sized bulk silicate materials is reported using isotope dilution high‐resolution inductively coupled plasma‐mass spectrometry (HR‐ICP‐MS) with a flow injection system. Silicate samples with Cr, Ni, Cu and Zn spikes were digested with HF‐HBr and Br₂, and subsequently decomposed at 518 K in a Teflon bomb. In this procedure, all sulfides and chromite, major hosts of these elements, were completely decomposed, thus allowing for isotope equilibration between the sample and spike. Magnesium and Al fluorides formed after the digestion of the sample were removed by centrifugation, and the supernatant was directly aspirated into a HR‐ICP‐MS at a mass resolution of 7500, where interfering oxide ions, ArO⁺, CaO⁺, TiO⁺, CrO⁺ and VO⁺, were separated from Cr⁺, Ni⁺, Cu⁺ and Zn⁺. No matrix effects were observed down to a dilution factor of 50. Detection limits for these elements in silicate samples were < 0.04 μg g^?1. The effectiveness of the technique was demonstrated by the analysis of 13 to 40 mg test portions of USGS and GSJ silicate reference materials with a major element composition ranging from andesite to peridotite, in addition to 8‐23 mg of the Smithsonian reference Allende. Both the reproducibility and the deviation from the reference value for most reference materials of various rock types were < 9%, and thus confirm that the method gives accurate analytical results for small sample sizes over a wide range of Cr, Ni, Cu and Zn contents. This method is, therefore, suitable for analysing small and/or precious bulk samples, such as meteorites, mantle peridotites and mineral separates, and for the characterisation of silicate and sulfide minerals for use as calibration samples in secondary ion mass spectrometry or laser ablation ICP‐MS.     

Overview and current status of the VSOP mission

An overview and status report of the VLBI Space Observatory Programme is presented.     

Experimental and analytical studies on earthquake resisting behaviour of confined concrete block masonry structures

To improve the seismic performance of masonry structures, confined masonry that improves the seismic resistance of masonry structures by the confining effect of surrounding bond beams and tie columns is constructed. This study investigated the earthquake resisting behaviour of confined masonry structures that are being studied and constructed in China. The structural system consists of unreinforced block masonry walls with surrounding reinforced concrete bond beams and tie columns. The characteristics of the structure include: (1) damage to blocks is reduced and brittle failure is avoided by the comparatively lower strength of the joint mortar than that of the blocks, (2) the masonry walls and surrounding reinforced concrete bond beams and tie columns are securely jointed by the shear keys of the tie columns. In this study, wall specimens made of concrete blocks were tested under a cyclic lateral load and simulated by a rigid body spring model that models non‐linear behaviour by rigid bodies and boundary springs. The results of studies outline the resisting mechanism, indicating that a rigid body spring model is considered appropriate for analysing this type of structure. Copyright © 2006 John Wiley & Sons, Ltd.     

The layered structure of lunar maria: Identification of the HF-radar reflector in Mare Serenitatis using multiband optical images

Comparison of the Lunar Radar Sounder (LRS) data to the Multiband Imager (MI) data is performed to identify the subsurface reflectors in Mare Serenitatis. The LRS is FM-CW radar (4–6 MHz) and the 2 MHz bandwidth leads to the range resolution of 75 m in a vacuum, whereas the sampling interval in the flight direction is about 75 m when an altitude of the spacecraft with polar orbit is nominal (100 km). Horizontally continuous reflectors were clearly detected by LRS in limited areas that consist of about 9% of the whole maria. The typical depth of the reflectors is estimated to be a few hundred meters. Layered structures of mare basalts are also discernible on some crater walls in the MI data of the visible bands (VIS). The VIS range has nine wavelengths of 415, 750, 900, 950, and 1000 nm, and their spatial resolution is 20 m/pixel at a nominal altitude. The stratigraphies around Bessel and Bessel-H craters in Mare Serenitatis are examined in this paper. It was revealed that the subsurface reflectors lie on the boundaries between basalt units with different chemical compositions. In addition, model calculations using the simplified radar equation indicate that the subsurface reflectors are not compositional interfaces but layer boundaries with a high-porosity contrast. These results suggest that the detected reflectors in Mare Serenitatis are regolith accumulated during so long hiatus of mare volcanisms enough for chemical composition of magma to change, not instantaneously. Therefore combination of the LRS and MI data has a potential to reveal characteristics of a series of magmatism forming each lithostratigraphic unit in Mare Serenitatis and other maria.     

INVERSION OF STRIKE-SLIP MOVEMENTS ALONG THE YARLUNG ZANGBO SUTURE ZONE, TIBET

INVERSION OF STRIKE-SLIP MOVEMENTS ALONG THE YARLUNG ZANGBO SUTURE ZONE, TIBET     

Comparison of organotin accumulation in the masu salmon Oncorhynchus masou accompanying migratory histories

In order to examine the accumulation pattern of organotin compounds (OTs) accompanying the migration pattern in diadromous fish, tributyltin (TBT) and triphenyltin (TPT) compounds and their derivatives were determined in the liver, muscle, gill, and ovary tissues of both sea-run and freshwater-resident masu salmon, which are of the same species, Oncorhynchus masou. Their migratory histories were estimated using strontium (Sr) and calcium (Ca) analysis in the otolith. A significant difference in the mean Sr:Ca ratio from the core to the edge of the otolith was found between sea-run and freshwater-resident masu salmon. The TBT concentration in the liver was significantly higher than that in the other tissues in both sea-run and freshwater-resident fishes. In sea-run masu salmon, the TBT concentrations in all tissues except for the ovary were significantly higher than in those of freshwater-resident individuals. In the sea-run type, the percentage of TBT was higher than that of the freshwater-resident type. The TPT concentration in the liver of the sea-run type was also significantly higher than that in the other tissues, while that in the gill of the freshwater-resident type was significantly higher than that in the other tissues except for the ovary. The TPT concentrations found in the liver and muscle of the sea-run type were significantly higher than those in the freshwater-resident type, whereas the values of the gill in the sea-run type were significantly lower than those in the freshwater-resident fish examined. The percentage of TPT in the sea-run type was higher than that of the freshwater-resident type. These results suggest that the sea-run O. masou has a higher ecological risk of TBT and TPT exposure than the freshwater-residents during their life history.     

Induction of female‐to‐male sex change in a large protogynous fish,Choerodon schoenleinii

Most behavioral studies on hermaphroditic fishes have focused on small‐sized species, which are tractable for research. Although many species of large hermaphroditic fishes are important fishery resources, their proximate mechanisms (visual, chemical and/or behavioral cues) in the social regulation of sex change have not been determined. Determination of these would inform resource management and aquaculture. In order to get closer to understanding the proximate mechanisms underlying the social regulation of female‐to‐male sex change in large hermaphroditic fishes, this study reports situations that induced female‐to‐male sex change in black‐spot tuskfish, Choerodon schoenleinii, a species of large protogynous fish, in massive laboratory tanks. The situations differed in the possibility of male‐to‐female tactile contact and in the group sex ratio, enabling us to infer plausible proximate mechanisms underlying sex change induction. Tactile contact between individuals is suspected to be closely related to the incidence of female‐to‐male sex change in C. schoenleinii. Visual and chemical cues alone may be insufficient to inhibit such sex changes. Male‐to‐female tactile contact may have an important influence on female‐to‐male sex change, i.e., inhibition of this sex change, in this species. The effect of sex ratio of a social group on the incidence of sex change may be due to the relative frequency and intensity of male tactile contact with each female, which may vary with the number of females. In the absence of a dominant male, tactile contact among females may affect the incidence of sex change, as well as determine which individuals change sex.     

河西绿洲区春小麦蒸腾蒸散的变化研究

在甘肃张掖绿洲区利用浮力称重式蒸散仪对春小麦蒸散量进行了测定,对蒸散量的日变化和季节变化特征进行了论述。研究结果表明:小麦田的日蒸散量在白天12:00~16:00达到最大,夜间20:00~08:00最小甚至呈负值。灌溉前后蒸腾强度出现峰值的时间有所变化。但灌溉以后,蒸腾与蒸散量均呈增大趋势。日蒸散量随着净辐射的增加而加大。在小麦不同的生育阶段,蒸散量有所不同,小麦拔节以前较小,拔节以后开始增大,灌浆期达到最大,接近成熟时逐渐降低。