Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.     

厦门海沧海岸地区采石废弃地生态恢复研究

本文分析了厦门海沧海岸地区花岗岩资源开发利用现状和存在的问题，运用生态恢复理论讨论了矿山采石高难度地生态恢复技术途径和模式。     

Longshore drift estimation using fluorescent tracers: New insights from an experiment at Comporta Beach, Portugal

A fluorescent sand-tracer experiment was performed at Comporta Beach (Portugal) with the aim of acquiring longshore sediment transport data on a reflective beach, the optimization of field and laboratory tracer procedures and the improvement of the conceptual model used to support tracer data interpretation.

The field experiment was performed on a mesotidal reflective beach face in low energetic conditions (significant wave height between 0.4 and 0.5 m). Two different colour tracers (orange and blue) were injected at low tide and sampled in the two subsequent low tides using a high resolution 3D grid extending 450 m alongshore and 30 m cross-shore. Marked sand was detected using an automatic digital image processing system developed in the scope of the present experiment.

Results for the two colour tracers show a remarkable coherence, with high recovery rates attesting data validity. Sand tracer displayed a high advection velocity, but with distinct vertical distribution patterns in the two tides: in the first tide there was a clear decrease in tracer advection velocity with depth while in the second tide, the tracer exhibited an almost uniform vertical velocity distribution. This differing behaviour suggests that, in the first tide, the tracer had not reached equilibrium within the transport system, pointing to a considerable time lag between injection and complete mixing. This issue has important implications for the interpretation of tracer data, indicating that short term tracer experiments tend to overestimate transport rates. In this work, therefore, longshore estimates were based on tracer results obtained during the second tide.

The estimated total longshore transport rate at Comporta Beach was 2 × 10^− 3 m³/s, more than four times larger than predicted using standard empirical longshore formulas. This discrepancy, which results from the unusually large active moving layer observed during the experiment, confirms the idea that most common longshore transport equations under-estimate total sediment transport in plunging/surging waves.     

萼花臂尾轮虫(Brachionus calyciflorus)COI基因序列变异及种群遗传结构分析

利用线粒体细胞色素氧化酶亚基Ⅰ(cytochrome oxidaseⅠ，COI)基因序列对北京地区和江汉湖群部分湖泊萼花臂尾轮虫(Brachionus calyciflorus)种群遗传结构进行了初步分析。以特异引物进行PCR扩增，获得了661bp的基因片断序列，所得序列与Genbank中B．calyciflorus COI序列的同源性为82％—93％。在6个种群中，共获得了15种单元型。序列分析结果表明，不同季节单元型之间的遗传距离较大(0．248-0．263)，而在同一季节单元型之间遗传距离较小(0．002-0．031)。种群遗传结构分析表明，各种群之间无共享的单元型，同一季节不同湖泊种群之间存在着一定程度的遗传分化，但未按照地理位置形成明显的地理格局。按采样时间分组进行AMOVA分析，组间差异高达94．09％；DH-I与其他种群之间存在着明显的遗传分化。同一湖泊不同季节样品之间，遗传变异较大，这表明在同一湖泊存在着不同基因型的轮虫休眠卵，当环境条件发生了变化后，不同基因型之间会发生更迭。     

长江口南支潮流的一个数值模拟

为了能够精确地拟合天然水域不规则的水陆边界,并能保持有限差分数值计算在矩形网格中进行,本文利用Thompson的数值网格生成技术,在长江口南支七丫口至横沙河段设计了一个椭圆型边界拟合坐标系,并在这个坐标系下建立了平面二维潮流数学模型。通过数值求解此数学模型,实现了计算区域内现状潮流的一个数值模拟,模拟结果表明,模式的设计是成功的。     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

深圳湾福田红树林区藻类、纤毛虫等生物群落及其与环境的关系

对福田国家级红树林自然保护区近岸水域进行水质及生态调查,结果显示,深圳湾潮汐对红树林中微型生物生态及湿地污染状况产生了最为直接的影响;藻类在红树林中具有较好的水质污染指示作用,其生态功能大于纤毛虫、轮虫等微型生态类群;微型生物可通过食物链对污染物起放大和传递作用,传递途径在水体中以藻→纤毛虫为主,底质中以藻→底栖动物幼虫为主。     

运城盆地11 kaBP以来气候环境变迁与湖面波动

通过黄土区湖泊沉积研究来恢复古气候、古环境，是对黄土区古气候、古环境研究的补充和检验。通过山西运城盆地硝地湖泊沉积物的多环境代用指标分析，结合史料记载，探讨了该地区11kaBP以来古气候演化和湖面波动的历史。结果表明，该地区存在YD（Younger Dryas）事件，进入全新世后气候有显著的趋势，最高湿润度发生在7．88－5．15和5kaBP后，气候逐渐变干，湖面波动与气候波动相关，全新世早期湖面开始上升，湖泊扩张，5kaBP后湖泊萎缩，盐类结晶析出。     

基于GIS的城市交通网络要素可视化表达方法研究

城市交通网络要素的可视化表达是GIS—T研究和应用领域中的一个难题,本文在对目前流行的交通网络数据模型进行系统研究的基础上,选择了动态分段技术下的结点-弧段模型,对交通网络复杂要素进行可视化表达,并对城市交通网络要素的可视化表达方法和形式进行了分析,最后结合交通网络复杂要素的可视化表达,设计和创建了具体的数据结构表和数据结构图。     

GALILEO系统仿真与分析

本文着重阐述了GALILEO仿真系统星座和误差模型的构建过程,利用该系统进行DOP值分析并通过定位解算验证了GALILEO系统的性能指标。通过与GPS系统性能指标进行比较,得出GALILEO系统的星座设计具有较好的DOP值分布特性,定位精度优于GPS定位精度。在进行差分定位时,其误差贡献比较大的是接收机噪声和卫星钟差,因此提高差分定位的关键是降低接收机的噪声水平和提高卫星钟差预报精度。