Modeling core-scale permeability anisotropy in highly bioturbated “tight oil” reservoir rocks

A high-resolution simulation model of a heterogeneous low-permeability rock sample is used to investigate the effects of physical and biogenic sedimentary structures on scaling and anisotropy of absolute permeability at the core scale. Several simulation sub-samples with random locations and volumes were also selected for evaluation of the effects of scale and lithological composition on the calculated permeability. Vertical and horizontal permeability values (from whole core simulation) are in good agreement with routine core analysis (RCA) measurements from offsetting cores. Despite relatively good reservoir quality associated with geobodies of biogenic and relic bedding structures, results from the full diameter core simulation demonstrate that their limited volumetric abundance and restricted connectivity prevent these features from controlling fluid flow in these rocks. In fact, permeability seems to be dominated by the tighter encasing matrix, which exhibits average permeability values very close to those reported from RCA. Geometric averaging offers a better representation for the upscaling of horizontal permeability datasets; whereas, both geometric and harmonic averaging work similarly well for the vertical measurements. The methodology used in this work is particularly applicable to the detailed characterization of reservoir rocks with a high degree of heterogeneity caused by biological reworking and diagenesis.     

Simulating urban growth in a megalopolitan area using a patch‐based cellular automata

Although traditional cellular automata (CA)‐based models can effectively simulate urban land‐use changes, they typically ignore the spatial evolution of urban patches, due to their use of cell‐based simulation strategies. This research proposes a new patch‐based CA model to incorporate a spatial constraint based on the growth patterns of urban patches into the conventional CA model for reducing the uncertainty of the distribution of simulated new urban patches. In this model, the growth pattern of urban patches is first estimated using a developed indicator that is based on the local variations in existing urban patches. The urban growth is then simulated by integrating the estimated growth pattern and land suitability using a pattern‐calibrated method. In this method, the pattern of new urban patches is gradually calibrated toward the dominant growth pattern through the steps of the CA model. The proposed model is applied to simulate urban growth in the Tehran megalopolitan area during 2000–2006–2012. The results from this model were compared with two common models: cell‐based CA and logistic‐patch CA. The proposed model yields a degree of patch‐level agreement that is 23.4 and 7.5% higher than those of these pre‐existing models, respectively. This reveals that the patch‐based CA model simulates actual development patterns much better than the two other models.     

Thermal stability of a layer with permeable boundaries and variable gravitational field

The aim of this paper is to investigate the thermal stability of a fluid layer with permeable boundaries and a variable gravitational field. It is observed that the principle of exchange of stabilities is valid when the layer is heated form below and the complex growth rate of an arbitrary oscillatory mode exists outside of a circle whose radius depends upon the permeability parameter, Prandtl number and wavelength of the mode. In the case of a layer heated from below, gravity increasing upward has a destabilizing effect whereas the permeability parameter has a stabilizing effect.     

The Relationship between Fe Mineralization and Magnetic Basement Faults using Multifractal Modeling in the Esfordi and Behabad Areas (BMD), Central Iran

Multifractal modeling is a mathematical method for the separation of a high potential mineralized background from a non-mineralized background. The Concentration-Distance to Fault structures (C-DF) fractal model and the distribution of the known iron (Fe) deposits/mines seen in the Esfordi and Behabad 1:100,000 sheets from the Bafq region of central Iran are used to distinguish Fe mineralization based on their distance to magnetic basement structures and surface faults, separately, using airborne geophysical data and field surveys. Application of the C-DF fractal model for the classification of Fe mineralizations in the Esfordi and Behabad areas reveals that the main ones show a correlation with their distance from magnetic basement structures. Accordingly, the distances of Fe mineralizations with grades of Fe higher than 55% )43% < Fe ≤ 60%) are located at a distance of less than 1 km, whereas for surfacial faults with grades of 43% ≤ Fe ≤ 60%, the distances are 3162< DF ≤ 4365 m from the faults. Thus, there is a positive relationship between Fe mineralization and magnetic basement structures. Also, the proximity evidence of Precambrian high-grade Fe mineralization related to magnetic basement structures indicates syn-rifting tectonic events. Finally, this C-DF fractal model can be used for exploration of magmatic and hydrothermal ore deposits.     

Geochemical Characteristics,Origin, and Evolution of Ore‐Forming Fluids of the Khut Copper Skarn Deposit,West of Yazd in Central Iran

The Khut copper skarn deposit is located at about 50 km northwest of Taft City in Yazd province in the middle part of the Urumieh‐Dokhtar magmatic arc. Intrusion of granitoid of Oligocene–Miocene age into carbonate rocks of the Triassic Nayband Formation led to the formation of marble and a calcic skarn. The marble contains high grade Cu mineralization that occurs mainly as open space filling and replacement. Cu‐rich sulfide samples from the mineralized marble are also anomalous in Au, Zn, and Pb. In contrast, the calcic skarn is only weakly anomalous in Cu and W. The calcic skarn is divided into garnet skarn and garnet–pyroxene skarn zones. Paragenetic relationships and microthermometric data from fluid inclusions in garnet and calcite indicate that the compositional evolution of skarn minerals occurred in three main stages as follows. (i) The early prograde stage, which is characterized by Mg‐rich hedenbergite (Hd_53.7Di_42.3–Hd_86.1Di_9.5) with Al‐bearing andradite (69.8–99.5 mol% andradite). The temperature in the early prograde skarn varies from 400 to 500°C at 500 bar. (ii) The late prograde stage is manifested by almost pure andradite (96.2–98.4 mol% andradite). Based on the fluid inclusion data from garnet, fluid temperature and salinity in this stage is estimated to vary from 267 to 361°C and from 10.1 to 21.1 wt% NaCl equivalent, respectively. Pyrrhotite precipitation started during this stage. (iii) The retrograde stage occurs in an exoskarn, which consists of an assemblage of ferro‐actinolite, quartz, calcite, epidote, chlorite, sphalerite, pyrite, and chalcopyrite that partially replaces earlier mineral assemblages under hydrostatic conditions during fracturing of the early skarn. Fluids in calcite yielded lower temperatures (T < 260°C) and fluid salinity declined to ～8 wt% NaCl equivalent. The last stage mineralization in the deposit is supergene weathering/alteration represented by the formation of iron hydroxide, Cu‐carbonate, clay minerals, and calcite. Sulfur isotope data of chalcopyrite (δ³⁴S of +1.4 to +5.2‰) show an igneous sulfur source. Mineralogy and mineral compositions of the prograde assemblage of the Khut skarn are consistent with deposition under intermediately oxidized and slightly lower fS₂ conditions at shallow crustal levels compared with those of other typical Fe‐bearing Cu–Au skarn systems.     

Prediction of water inflow to mechanized tunnels during tunnel-boring-machine advance using numerical simulation

An accurate estimate of the groundwater inflow to a tunnel is one of the most challenging but essential tasks in tunnel design and construction. Most of the numerical or analytical solutions that have been developed ignore tunnel seepage conditions, material properties and hydraulic-head changes along the tunnel route during the excavation process, leading to inaccurate prediction of inflow rates. A method is introduced that uses MODFLOW code of GMS software to predict inflow rate as the tunnel boring machine (TBM) gradually advances. In this method, the tunnel boundary condition is conceptualized and defined using Drain package, which is simulated by dividing the drilling process into a series of successive intervals based on the tunnel excavation rates. In addition, the drain elevations are specified as the respective tunnel elevations, and the conductance parameters are assigned to intervals, depending on the TBM type and the tunnel seepage condition. The Qomroud water conveyance tunnel, located in Lorestan province of Iran, is 36 km in length. Since the Qomroud tunnel involved groundwater inrush during excavating, it is considered as a good case study to evaluate the presented method. The groundwater inflow to this tunnel during the TBM advance is simulated using the proposed method and the predicted rates are compared with observed rates. The results show that the presented method can satisfactorily predict the inflow rates as the TBM advances.     

Determining the hard rock groundwater pathway in Golgohar complex formation using hydrochemical data in AHP

Thirty percent of present industrial water consumption of the Golgohar Iron Ore Mine (GIOM) is supplied from a hard rock well (PW-A15) and the rest from 25 wells located in 4 disconnected alluvial aquifers. This well is drilled in the metamorphic complex of Golgohar formation. Attempts have been made to develop extraction of water from other hard rocks existing in the area with no success. Therefore, extensive researches have been carried out to find the pathway, or a provision pathway of water discharged from this well. To study the hydrochemical similarity of this water with other water resources, 122 water samples from an area of 7132 km² were collected from the existing pumping wells, piezometers, mine exploration bore holes, and three salt pans in the vicinity of the area for hydrochemical analysis. The analyses were performed for concentration of major ions and some minor elements. Furthermore, the spatial distribution of ion concentration was plotted in the GIS to delineate the similarity of the PW-A15 water with other water sources and their hydrochemical neighborhood by analytical hierarchy process (AHP). The AHP was performed in two steps: first, iso-concentration maps of seven major ions, eight minor elements, and TDS were used to produce an AHP map (Map1) using weights for different hydrochemical parameters; and second, a similarity index (SI) map was prepared by performing a suggested clustering approach in SPSS using K-means clustering, which was overlaid on Map1 producing Map2. The result of AHP Map2 was then overlaid on the iso-potential map of the sampled locations in GIS software using a mask operator. Therefore, the zones having the most similarity and higher hydraulic potential than PW-A15 were nominated as the zones which possibly could recharge this well, and the groundwater (GW) pathway was proposed. The result of the study method showed to be successful and will be used as a guide for future exploration drillings.     

Bringing globalization to the countryside: Special Economic Zones in India

Special Economic Zones (SEZs) are important vectors of neoliberal globalization in India. Despite facing widespread resistance against the proposed land acquisition for these zones, they are still being promoted across the country. We argue that the wealth redistribution to the country's elites and the fractured resistance movements enable neoliberalism and its practices to grow in the countryside. Using a private sector SEZ in Gurgaon as a case study, this article explores how special economic zoning, as a neoliberal policy, has been implicated in the spatialized production of poverty. We also show that the main actors who promote neoliberalism in India (the state and the large‐scale urban private sector) have found a seemingly unlikely ally in rural India in the form of farmers with large landholdings, rural elites who are willing to let go of their land under certain conditions. The data for the article was collected in India in 2009–10.     

Application of the coral health chart to determine bleaching status of <Emphasis Type="Italic">Acropora downingi</Emphasis> in a subtropical coral reef

The ‘Coral Health Chart’ has become a popular tool for monitoring coral bleaching worldwide. The scleractinian coral Acropora downingi (Wallace 1999) is highly vulnerable to temperature anomalies in the Persian Gulf. Our study tested the reliability of Coral Health Chart scores for the assessment of bleaching-related changes in the mitotic index (MI) and density of zooxanthellae cells in A. downingi in Qeshm Island, the Persian Gulf. The results revealed that, at least under severe conditions, it can be used as an effective proxy for detecting changes in the density of normal, transparent, or degraded zooxanthellae and MI. However, its ability to discern changes in pigment concentration and total zooxanthellae density should be viewed with some caution in the Gulf region, probably because the high levels of environmental variability in this region result in inherent variations in the characteristics of zooxanthellae among “healthy” looking corals.