Proposed river-linking project of India: a boon or bane to nature

India is a vast country and is highly diversified in terms of natural resources and socio-economic setup. Moreover, its water resources are unevenly distributed in space and time. With increasing population and increasing aspiration for improved standard of living, there is an acute pressure on the demand and availability of water. Though the idea of interlinking of rivers is not a new concept in India, it had rather persisted long back as much as in other countries of ancient civilization. National Water Development Agency (NWDA) has given the real shape to the proposal of the interlinking of rivers of the country. In India the river-linking project in a sensible and scientific manner will not only allow the prevention of the colossal wastage of a vitally important natural resource, mitigate the flood and inundation by detaining flowing surface water of rainy seasons, but also ensure availability of water to drier areas; combating both flood and drought simultaneously. Moreover, this project will generate 34,000 MW of hydropower and irrigation of an additional 35 million hectares (135,135 square miles) of land. Though linking of rivers may initially appear to be a costly proposition in ecological, geological, hydrological and economical terms, in the long run the net benefits coming from it will far outweigh these costs or losses. However, in the absence of any definite international legal framework, Bangladesh has raised objections against the project. This paper aims at looking at this long-term plan, the project proposal, its involvement and impact not only on the states of India, India as a whole, but also on its neighbouring nations which are linked with India through the waterways, and share the common climatic conditions and economic status.     

Is the outcrop topology of dolerite dikes of the Precambrian Singhbhum Craton fractal?

In the Precambrian Singhbhum Craton of eastern India, newer dolerite dikes occur profusely with varying outcrop lengths. We have analysed the nature of their length-size and orientation distributions in relation to the theory of fractals. Two orientational sets of dikes (NW-SE and NE-SW) are present. Both the sets show strongly non-power-law size distributions, as reflected in non-linear variations in logarithmic space. We analyzed thousands of data, revealing that polynomial functions with a degree of 3 to 4 are the best representatives of the non-linear variations. Orientation analysis shows that the degree of dispersions from the mean trend tends to decrease with increasing dike length. The length-size distributions were studied by simulating fractures in physical models. Experimental fractures also show a non-power-law distribution, which grossly conforms to those of the dolerite dikes. This type of complex size distributions results from the combined effects of nucleation, propagation and coalescence of fractures.     

Axial service limit state analysis of drilled shafts using probabilistic approach

Drilled shafts are, typically, designed by considering the axial ultimate limit state. In this design methodology, the axial displacement requirements are verified once the design is completed. As an alternative, drilled shafts may be designed by considering the axial service limit state. Service limit state foundation design is more efficient when done using the load and resistance factor design (LRFD) approach. Furthermore, reliability may be rationally incorporated into the design process that utilizes the LRFD method. In this paper, we develop probabilistic approaches for axial service limit state analysis of drilled shafts. The variability of shaft-soil interface properties is modeled by lognormal probability distribution functions. The probability distributions are combined with a closed-form analytical relationship of axial load-displacement curves for drilled shafts. The closed-form analytical relationship is derived based upon the “t–z” approach. This analytical relationship is used with the Monte Carlo simulation method to obtain probabilistic load-displacement curves, which are analyzed to develop methods for determining the probability of drilled shaft failure at the service limit state. The developed method may be utilized to obtain resistance factors that can be applied to LRFD based service limit state design.     

Modelling of feed distributor at coal washeries

The biased subdivision of slurry feed to a number of unit operations in parallel results in each unit operating under different density volumetric flow rate, feed concentration. Consequently some of the units may operate under sub-optimal conditions leading to reduced operating efficiencies of sizing and cleaning units. The objective of this work was to identify the reasons for biased slurry subdivision in the feed distributor of Washery-II, West Bokaro, Tata Steel, Jamshedpur, India. A lab model of the feed distributor was set up at R&D using the principles of geometric similarity and dynamic similarity. A number of experimental investigations were carried out based on Design Of Experiments and the results analysed using ANOVA. The variation of feed rate of coal and its size distribution through different outlet ports were quantified through two terms, the coal split ratio and the variation index. The design of the insert, the number of water inlets, and the feeding position of coal in the distributor were the most important factors affecting the variation index. In case of coal split ratio, apart from the first two variables, none of the others had a significant effect. Four water inlets with symmetrically arranged outlets, equal water flow rate in the inlets and the material being fed in an annular ring into the distributor was found to reduce both the coal split ratio and the variation index.     

The microconstituents of Godavari coals,South India

The present paper deals in detail with the coal typology, rank and correlation of some Indian coal seams. Petrological evaluation of several known coal seams reveals that there are two main seams, the King (lower) seam and Queen (upper) seam, with distinctly different characteristics. All the other seams, locally known by different names elsewhere in the field, are correlatable with either the King or Queen seams.The coals are of inferior quality because of the predominance of mixed coals types associated with dispersed mineral matter. However, some seams show characteristics which are amenable to quality improvement with suitable preparation methods. The coals appear to have been formed rapidly in a fluctuating environment (aerobic to anaerobic) under relatively cold to gradually warming conditions.     

Concentration of Utah tar sands by an ambient temperature flotation process

Physical separation of bitumen from low-grade Utah tar sand deposits containing a relatively high viscosity bitumen phase (Sunnyside and Tar Sand Triangle deposits) has been accomplished by traditional size reduction and froth flotation techniques. At appropriate experimental conditions more than 90% of the bitumen can be recovered in a concentrate, containing more than 20 wt. % bitumen, which should be a suitable feed material for subsequent hot water or thermal processing. The efficiency of bitumen recovery depends on the extent of size reduction, as well as promoter and dispersant addition. Rejection of greater than 60% of the sand at ambient temperature and ease of water removal from the concentrate make such a process strategy both energy and cost effective. The energy required to achieve effective separation by the ambient temperature process is significantly less than the energy required for the recently developed hot water process which is being evaluated in a 100-tpd pilot plant this year.The flotation behaviour of the tar sand in this ambient temperature process has been correlated with contact angle measurements and the apparent point-of-zero-charge of the bitumen. The best flotation response at pH 7.8 to 9.0 occurs when the contact angle between the air bubble and bitumen surface is a maximum, corresponding to the apparent point-of-zero-charge of the bitumen as determined by titration.     

Mapping a Specific Crop—A Temporal Approach for Sugarcane Ratoon

Mapping a specific crop using single date multi-spectral imagery remains a challenging task because vegetation spectral responses are considerably similar. The use of multi-temporal images helps to discriminate specific crops as the classifier can make use of the uniqueness in the temporal evolution of the spectral responses of the different vegetated classes. However, one major concern in multi-temporal studies is the selection of optimum dates for the discrimination of crops as the use of all available temporal dates can be counterproductive. In this study this concern was addressed by selecting the best 2, 3, 4… combinations dates. This was done by conducting a separability analysis between the spectral response of the class of interest (here, sugarcane-ratoon) and non-interest classes. For this analysis, we used time series LISS-III and AWiFS sensors data that were classified using Possibilistic c-Means (PCM). This fuzzy classifier can extract single class sub-pixel information. The end result of this study was the detection of best (optimum) temporal dates for discriminating a specific crop, sugarcane-ratoon. An accuracy of 92.8 % was achieved for extracting ratoon crop using AWiFS data whereas the optimum temporal LISS-III data provided a least entropy of 0.437. Such information can be used by agricultural department in selecting an optimum number of strategically placed temporal images in the crop growing season for discriminating the specific crop accurately.     

Formation of cyanoallene （buta-2, 3-dienenitrile） in theinterstellar medium： a quantum chemical and spectroscopicstudy

The interstellar medium, filling the vast space between stars, is a rich reser-voir of molecular material ranging from simple diatomic molecules to more com-plex, astrobiologically important molecules such as vinylcyanide, methylcyanodiac-cetylene, cyanoaUene, etc. Interstellar molecular cyanoallene is one of the most stableisomers of methylcynoacetylene. An attempt has been made to explore the possibilityof forming cyanoallene in interstellar space by radical-radical and radical-moleculeinteraction schemes in the gaseous phase. The formation of cyanoallene starting fromsome simple, neutral interstellar molecules and radicals has been studied using densityfunctional theory. The reaction energies and structures of the reactants and productsshow that the formation of cyanoallene is possible in the gaseous phase. Both of theconsidered reaction paths are totally exothermic and barrierless, thus giving rise to ahigh probability of occurrence. Rate constants for each step in the formation processof cyanoallene in both the reaction paths are estimated. A full vibrational analysishas been attempted for cyanoallene in the harmonic and anharmonic approximations.Anharmonic spectroscopic parameters such as rotational constants, rotation-vibrationcoupling constants and centrifugal distortion constants have been calculated.     

Assessment of PM<Subscript>2.5</Subscript> chemical compositions in Delhi: primary vs secondary emissions and contribution to light extinction coefficient and visibility degradation

Haze-fog conditions over northern India are associated with visibility degradation and severe attenuation of solar radiation by airborne particles with various chemical compositions. PM_2.5 samples have been collected in Delhi, India from December 2011 to November 2012 and analyzed for carbonaceous and inorganic species. PM₁₀ measurements were made simultaneously such that PM_10–2.5 could be estimated by difference. This study analyzes the temporal variation of PM_2.5 and carbonaceous particles (CP), focusing on identification of the primary and secondary aerosol emissions, estimations of light extinction coefficient (b_ext) and the contributions by the major PM_2.5 chemical components. The annual mean concentrations of PM_2.5, organic carbon (OC), elemental carbon (EC) and PM_10–2.5 were found to be 153.6 ± 59.8, 33.5 ± 15.9, 6.9 ± 3.9 and 91.1 ± 99.9 μg m^?3, respectively. Total CP, secondary organic aerosols and major anions (e.g., SO₄ ^2? and NO₃ ^?) maximize during the post-monsoon and winter due to fossil fuel combustion and biomass burning. PM_10–2.5 is more abundant during the pre-monsoon and post-monsoon. The OC/EC varies from 2.45 to 9.26 (mean of 5.18 ± 1.47), indicating the influence of multiple combustion sources. The b_ext exhibits highest values (910 ± 280 and 1221 ± 371 Mm^?1) in post-monsoon and winter and lowest in monsoon (363 ± 110 and 457 ± 133 Mm^?1) as estimated via the original and revised IMPROVE algorithms, respectively. Organic matter (OM =1.6 × OC) accounts for ~39 % and ~48 % of the b_ext, followed by (NH₄)₂SO₄ (~21 % and ~24 %) and EC (~13 % and ~10 %), according to the original and revised algorithms, respectively. The b_ext estimates via the two IMPROVE versions are highly correlated (R² = 0.95, root mean square error = 38 % and mean bias error = 28 %) and are strongly related to visibility impairment (r = ?0.72), mostly associated with anthropogenic rather than natural PM contributions. Therefore, reduction of CP and precursor gas emissions represents an urgent opportunity for air quality improvement across Delhi.