武威市初、终霜日气候特征

为了因地制宜,合理调整种植结构和布局,有效利用农业气候资源。利用1961—2014年武威市4个气象站点初、终霜日(最低地温≤0℃)观测资料,采用现代气候诊断分析方法,系统分析了该市年初、终霜日的时空变化特征。结果表明:受海拔高度、地形地势以及植被覆盖情况的影响,在空间分布上,武威市初霜日为山区早于荒漠区早于绿洲平原区,终霜日为山区晚于荒漠区晚于绿洲平原区,各地初、终霜日存在一定的异常性,正常初、终霜日均在60%左右,对农业生产造成危害的偏早和特早初霜日、偏晚和特晚终霜日的概率均在20%左右。在时间变化上,武威市初霜日呈显著推迟趋势,终霜日呈显著提早趋势,霜期呈显著缩短趋势,终霜日提早的幅度比初霜日推迟的幅度更大。初霜日和终霜日的时间序列均分别存在着8~10年和9~11年的准周期变化。初霜日在1998年发生了气候突变,终霜日在1996年发生了气候突变。     

飞机下投探空在台风探测中的应用

在海洋探测方面,利用飞机进行下投探空拥有巨大的潜力去弥补全球高空探测网的空白。台风形成后,飞机飞入台风中心或绕台风飞行,下投配有全球卫星定位(GPS)装置的"探空仪",探空仪上安装有温度、气压、湿度传感器,通过GPS定位测风,对台风实施立体观测。多年来,飞机下投探空能够充分掌握台风的整体气象要素分布结构,从而提高对台风强度和移动路径等预报的准确性,飞机下投探空在国际上已经从科学试验转变成业务应用,并且形成新型的探测技术——目标观测。本文主要总结了国际上利用飞机搭载下投式探空仪进行台风探测的发展历程,为我国开展下投探空,特别是台风监测提供可借鉴的经验。     

An Immune Genetic Algorithm to Buildings Displacement in Cartographic Generalization

Spatial conflicts may occur when map data are displayed at a scale smaller than that of the source map. This study applies the displacement operator in cartographic generalization to resolve such spatial conflicts and to improve the clarity and legibility of map. The immune genetic algorithm (IGA) is used in this study for buildings displacement to solve conflicts. IGA is based on the genetic algorithm (GA) and employs the self‐adjusting mechanism of antibody concentration to enhance population diversity. Meanwhile, the elitism retention strategy is adopted in IGA to guarantee that the best individual (antibody) is not lost and destroyed in the next generation to strengthen convergence efficiency. The compared experiment between IGA and GA shows that the displacement result produced by IGA performs better than GA. Finally, in order to make the displaced map more attractive to cartographers, two constraints – the building alignment constraint and building tangent relation constraint – are applied in IGA to restrict the buildings’ displacement. The same experimental data are adopted to prove that the improved IGA is useful for maintaining the two constraints.     

底水油层水平井产液剖面均衡性评价

胜利油田开采底水特征高含水油层的水平井数量多,其中油层向水平井非均衡供液现象普遍。为评价此类水平井产液剖面均衡性,量化其生产动态改善潜力,定义了产液剖面基尼系数GN,并结合现场案例介绍其计算方法,随后统计胜利油田60口样本井,分析GN对见水时间tRL和底水突破前累积产油量QRL的影响,最后据此对GN分级。计算和分析结果表明:GN可以整体表征实际非均衡产液剖面偏离理想均衡产液剖面的程度,通常取值0~1之间,数值越大,均衡性越差;划分GN0.1为产液剖面不均衡,其样本井数54口,占比90%,以理想均衡产液状态为基准,tRL和QRL分别至少有100%和69.5%的提升潜力。     

Improvement of saponification extraction method for fatty acids separation from geological samples

The conventional saponification method could result in lower recoveries and artificial changes of long-chain fatty acids. The main reason is the error judgment of the intermediate layer suspended between the aqueous and organic layer during the liquid–liquid extraction process. This study shows that the intermediate layer consists of lots of medium- to long-chain carboxylic salts for their special physical and chemical properties. An improved saponification extraction method is also developed and the results show that the carboxylic salts distributed in the intermediate layer could be obtained completely, which greatly enhances the authenticity and accuracy of fatty acid analysis. Additionally, the possible reasons of formation of the intermediate layer are also discussed.     

Petrogenesis of Two Types of Archean TTGs in the North China Craton: A Case Study of Intercalated TTGs in Lushan and Non-intercalated TTGs in Hengshan

TTG(Tonalite-Trondhjemite-Granodiorite) gneisses,a major component of Precambrian continental crust,play a significant role in understanding the process and mechanism of the crustal evolution in the early periods of the Earth. In terms of field occurrence,there are two kinds of Archean TTGs in the NCC(North China Craton): intercalated and non-intercalated TTGs. In this contribution,we make a comprehensive comparison of these two types of TTGs from the typical areas(Lushan and Hengshan) in the NCC with an aim to constrain their petrogenesis. The results suggest that they have similar mineral assemblages of Pl + Qtz + Bt ± Amp ± Kfs but different field appearances and geochemical compositions,thus probably reflecting different source materials and tectonic settings. Differences in the contents of characteristic elements,such as Sr,REE and HFSE,suggest that the nonintercalated TTGs in Hengshan were generated at deeper levels than those of intercalated TTGs in Lushan. Constraints from element contents and geochemical modeling results are consistent with derivation from dual sources involving both garnet amphibolite and rutile-bearing eclogite residues for the non-intercalated TTGs in Hengshan,whereas the compositions of intercalated TTGs in Lushan indicate that they were formed by partial melting with amphibolite to garnet-amphibolite residues. Moreover,accumulation of plagioclase is also required in the petrogenesis of intercalated TTGs in Lushan,at least for part of them. In addition,the non-intercalated TTGs in Hengshan display distinctly higher Mg O,Mg#,Cr and Ni values and lower SiO_2 average contents compared to the intercalated TTGs in Lushan. These features suggest that the former magma,at least a part,might have interacted with the mantle wedge during ascent. Considering all the above factors and in combination with the whole-rock Nd and zircon Hf isotopic data,it is suggested that the non-intercalated TTGs in Hengshan were produced by partial melting of subducted slab contaminated by the overlying mantle wedge at deeper levels and high pressures,whereas the intercalated TTGs in Lushan were generated by melting of the thickened lower crust at lower pressures and shallower depths. The tectonic settings of the two types of TTGs shed new light on the growth of the NCC.     

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.