Measurement of the redox speciation of iron in seawater by catalytic cathodic stripping voltammetry

Catalytic cathodic stripping voltammetry (CSV) preceded by adsorptive collection of complexes of 1-nitroso-2-napthol (NN) can be used to determine iron in seawater. It is shown here that iron(II) is effectively masked in the presence of 2,2-dipyridyl (Dp) so that iron(III) is measured selectively. The concentration of iron(II) is then calculated as the difference between the concentrations of reactive iron (Fe_R) in the absence and presence of 2 μM Dp, Fe_R being defined as that which was complexed by 20 μM NN at pH 6.9 in the presence of 1.8 mM H₂O₂ and 5 ppm sodium dodecyl sulphate. A 30 min reaction time was allowed for Dp to react with iron(II) in seawater prior to the determination of reactive iron(III) using the same conditions as used for Fe_R. Detection limits of 0.08 nM, 0.077 nM and 0.12 nM were obtained for Fe_R, iron(III) and iron(II), respectively, using a 60 s deposition time.The method was utilised to determine the redox speciation of iron in the northern North Sea. Concentrations of Fe_R ranged between 0.8 and 3.5 nM with nutrient-like depth profiles. Iron(II) was found to be present at concentrations up to 1.2 nM, the highest concentrations occurring in the upper 20 m of the water column.     

Risk of dike failure due to flow slides

Flow slides may affect the stability of dikes. A flow slide is an instability of a submerged slope caused by liquefaction of loose, (medium) fine sand. Whether a flow slide will occur depends on the properties of the sand, which are a function of its density, and the geometry of the slope, as determined by wave and current induced scour and sedimentation. The influence of sand properties and the geometry parameters on the risk of flow slides are discussed. The application of a flow slide prediction method to an example and a risk analysis is briefly discussed.     

On the structural evolution of the Central Trough in the Norwegian and Danish sectors of the North Sea

The Central Trough of the North Sea is not a simple rift graben. It is an elongated area of regional subsidence which was initiated in mid Cretaceous times and continued to subside through to the late Tertiary. Its form is not representative of pre-mid Cretaceous tectonics.In Late Permian times the North Sea was divided into a northern and southern Zechstein basin by the E-W trending Mid North Sea-Ringkøbing-Fyn High. The latter was dissected by a narrow graben trending NNW through the Tail End Graben and the Søgne Basin. The Feda Graben was a minor basin on the northern flank of the Mid North Sea High at this time. This structural configuration persisted until end Middle Jurassic times when a new WNW trend separated the Tail End Graben from the Søgne Basin. Right lateral wrench movement on this new trend caused excessive subsudence in the Tail End and Feda Grabens while the Søgne Basin became inactive.Upper Jurassic subsidence trends continued during the Early Cretaceous causing the deposition of large thicknesses of sediments in local areas along the trend. From mid Cretaceous times the regional subsidence of the Central Trough was dominant but significant structural inversions occurred in those areas of maximum Early Cretaceous and Late Jurassic subsidence.     

Transient biouptake flux and accumulation by microorganisms: The case of two types of sites with Langmuir adsorption

The uptake of a chemical species by an aquatic microorganism is modelled considering two kinds of sites where Langmuirian adsorption is followed by first order internalisation kinetics. Simpler models, such as only one internalisation route (while most of the adsorption takes place on non-internalising sites) or a linear isotherm for adsorption on one or both sites, become limiting cases of this double-Langmuirian model. The model considers the sites located on the spherical (or semi-spherical) surface of the organism, and takes diffusion from the medium into explicit account. The numerical solution for the internalisation flux shows a maximum. We provide an estimate for the time needed to reach a certain proximity to steady state. The transient solution confirms that the analytical expressions for the steady-state flux are usually valid and that the accumulated amounts reflect the impact of the short-time uptake. The Instantaneous Steady-State Approximation (ISSA), where an intercept of the linear regression of accumulated amount as a function of time is interpreted as an adsorbed amount, can be critically assessed with the transient numerical code for two cases: (i) when the total burden of metal on the cell is the input data and (ii) when an extraction procedure provides further information on the adsorbed and internalised amount.     

Relative molar mass distributions of chromophoric colloidal organic matter in coastal seawater determined by Flow Field-Flow Fractionation with UV absorbance and fluorescence detection

A new method for the characterization of chromophoric colloidal organic matter in seawater has been applied to samples from the Baltic Sea, Kattegatt and Skagerrak seas. Size fractionation of the sample by Flow Field-Flow Fractionation and measurement of the fluorescent and UV absorbing properties of the individual size fractions result in a relative molar mass distribution (RMM) of the optical properties. The RMM distributions have been used to estimate number and weight average relative molar masses, and polydispersity indices. At least two sources of coloured organic matter were identified from the ratio of fluorescence to UV: the Baltic surface water and the Skagerrak deep water. The dominating processes were mixing and dilution, but processes such as photo bleaching of fluorescence are also believed to be important. The RMM distribution derived from UV detection (1150–1300 Dalton) increased with increasing salinity while that derived for fluorescence (1500–1250 Dalton) decreased with increasing salinity. The specific UV absorbance taken as a proxy of the aromaticity of the chromophoric organic material showed decreasing trend with both increasing salinity and increasing UV derived weight average relative molar mass. Increasing polydispersity of the colloidal material was also observed as a function of salinity.     

The expression of CYP1A,vitellogenin and zona radiata proteins in Atlantic salmon (Salmo salar) after oral dosing with two commercial PBDE flame retardant mixtures: absence of short-term responses

The short-term effects of the commercial PBDE flame retardant mixtures Penta-BDE and cta-BDE on the expression of cytochrome P450 1A (CYP1A), vitellogenin (Vtg) and zona radiata proteins (Zrp) were investigated in juvenile salmon (Salmo salar). For this purpose, groups of fish were dosed twice (oral intake at days I and 4) with 10 and 50 mg/kg body weight of both commercial mixtures. The fishes were sacrificed at day 7 (n = 5 for each group) and 14 (n = 6 for each group), and blood, liver, fillet, and brain were collected. Blanks and positive controls were also part of the experiment. The expressions of Vtg, Zrp, and CYPIA were measured with several techniques (EROD, ELISA, Western, Northern and Slot Blot). The values in the groups of fish treated with Penta-BDE or Octa-BDE did not significantly differ from the reference group for any of the parameters tested. In contrast, the positive control groups treated with estradiol-17beta for Vtg and Zrp expression, and beta-naphthoflavone for CYP1A expression did show a significant response, indicating the potential sensitivity of the fishes for the parameters measured. Since the results of the chemical analyses showed concentrations of a number of PBDE congeners in liver, fillet, and brain that were about three orders of magnitude above those of fish from the North Sea, it is concluded that the short-term toxicity of both commercial PBDE mixtures for these endpoints was low.     

The morphodynamic modelling of tidal sand waves on the shoreface

An artificial sand wave on the Dutch shoreface of the North Sea has been studied in conditions with relatively strong tidal currents in the range of 0.5 to 1 m/s and sediments in the medium sand size range of 0.2 to 0.5 mm. The sand wave is perpendicular to the tidal current and has a maximum height and length of the order of 5 m and 1 km, respectively. The sand wave is dynamically active and shows migration rates of the order of a few metres per year. A numerical morphodynamic model (DELFT3D model) has been used to simulate the morphological behaviour of the sand wave in the North Sea. This model approach is based on the numerical solution of the three-dimensional shallow water equations in combination with a surface wave propagation model (wind waves) and the advection–diffusion equation for the sediment particles with online bed updating after each time step. The model results show that the sand wave grows in the case of dominant bed-load transport (weak tidal currents; relatively coarse sediment; small roughness height; low waves) and that the sand wave decays in the case of dominant suspended transport (strong currents, relatively fine sediment, large roughness height; storm waves).