Global photometric properties of Asteroid (4) Vesta observed with Dawn Framing Camera

Dawn spacecraft orbited Vesta for more than one year and collected a huge volume of multispectral, high-resolution data in the visible wavelengths with the Framing Camera. We present a detailed disk-integrated and disk-resolved photometric analysis using the Framing Camera images with the Minnaert model and the Hapke model, and report our results about the global photometric properties of Vesta. The photometric properties of Vesta show weak or no dependence on wavelengths, except for the albedo. At 554 nm, the global average geometric albedo of Vesta is 0.38 ± 0.04, and the Bond albedo range is 0.20 ± 0.02. The bolometric Bond albedo is 0.18 ± 0.01. The phase function of Vesta is similar to those of S-type asteroids. Vesta’s surface shows a single-peaked albedo distribution with a full-width-half-max ∼17% relative to the global average. This width is much smaller than the full range of albedos (from ∼0.55× to >2× global average) in localized bright and dark areas of a few tens of km in sizes, and is probably a consequence of significant regolith mixing on the global scale. Rheasilvia basin is ∼10% brighter than the global average. The phase reddening of Vesta measured from Dawn Framing Camera images is comparable or slightly stronger than that of Eros as measured by the Near Earth Asteroid Rendezvous mission, but weaker than previous measurements based on ground-based observations of Vesta and laboratory measurements of HED meteorites. The photometric behaviors of Vesta are best described by the Hapke model and the Akimov disk-function, when compared with the Minnaert model, Lommel–Seeliger model, and Lommel–Seeliger–Lambertian model. The traditional approach for photometric correction is validated for Vesta for >99% of its surface where reflectance is within ±30% of global average.     

Mapping of Io's thermal radiation by the Galileo photopolarimeter-radiometer (PPR) instrument

Between 1999 and 2002, the Galileo spacecraft made 6 close flybys of Io during which many observations of Io's thermal radiation were made with the photopolarimeter-radiometer (PPR). While the NIMS instrument could measure thermal emission from hot spots with T>200 K, PPR was the only Galileo instrument capable of mapping the lower temperatures of older, cooling lava flows, and the passive background. We tabulate all data taken by PPR of Io during these flybys and describe some scientific highlights revealed by the data. The data include almost complete coverage of Io at better than 250 km resolution, with extensive regional coverage at higher resolutions. We found a modest poleward drop in nighttime background temperatures and evidence of thermal inertia variations across the surface. Comparison of high spatial resolution temperature measurements with observed daytime SO₂ gas pressures on Io provides evidence for local cold trapping of SO₂ frost on scales smaller than the 60 km resolution of the PPR data. We also calculated the power output from several hot spots and estimated total global heat flow to be about 2.0-2.6 W m⁻². The low-latitude diurnal temperature variations for the regions between obvious hot spots are well matched by a laterally-inhomogeneous thermal model with less than 1 W m⁻² endogenic heat flow.     

Unit pockmarks associated with Lophelia coral reefs off mid-Norway: more evidence of control by ‘fertilizing’ bottom currents

High-resolution topographic mapping of Norwegian deep-water Lophelia coral reefs and their immediate surrounding seafloor has disclosed striking associations with small (<5?m diameter) ‘unit’ pockmarks. A total of four study areas with Lophelia reefs and unit pockmarks are here described and discussed. At the large Fauna reef, which spans 500?m in length and 100?m in width (25?m in height), there is a field of 184 unit pockmarks occurring on its suspected upstream side. Three other, intermediate-sized Morvin reefs are associated with small fields of unit pockmarks situated upstream of live Lophelia colonies. For two of the latter locations, published data exist for geochemical and microbial analyses of sediment and water samples. Results indicate that these unit pockmarks are sources of light dissolved hydrocarbons for the local water mass, together with nutrient-rich pore waters. It is suggested that the ‘fertilized’ seawater flows with the prevailing bottom current and feeds directly into the live portion of the Lophelia reefs. With an estimated growth rate of ~1?cm per year for the Morvin Lophelia corals, it would take between 1,000 and 2,000?years for the reefs to colonize the closest unit pockmarks, currently occurring 10–20?m from their leading (live) edges.     

A collective approach to Pacific islands fisheries management: Moving beyond regional agreements

The sustainable management and profitable development of the Pacific island tuna fisheries is the key ocean governance challenge for the Pacific islands region in the short and medium term. Resolving these challenges is fundamental to the long term future of the region and its ability to implement oceans governance across all resource and conservation concerns.     

Origin of transverse folds in an extensional growth-fault setting: Evidence from an extensive seismic volume in the western Gulf of Mexico

Growth faults in gravity-driven extensional provinces are dominated by coast-parallel trends, but coast-perpendicular (transverse) trends are far less documented. The Clemente–Tomas fault in the inner Texas shelf has corrugations that are transverse to the fault and that plunge downdip. A large (8500 km²), high-quality, 3D seismic survey allows a uniquely encompassing perspective into hanging-wall deformation above this corrugated fault surface. Synextensional strata in the hanging wall are folded into alternating transverse ridges and synclines, typically spaced 10 km apart. Forward modelling in dip profiles of an extensional fault having three ramps produces ramp basin-rollover pairs that compare with the seismically revealed ridges and synclines. As they translated down the undulose fault plane, ramp basins and rollovers were juxtaposed along strike, forming the hanging-wall ridges and synclines observed offshore Texas. Fault-surface corrugations correlate broadly with footwall structure. We infer that corrugations on the Clemente–Tomas fault formed by evacuation of an allochthonous salt canopy emplaced in the late Eocene to early Oligocene. Early salt evacuation (Oligocene) created an undulose topography that influenced incipient Clemente-Tomas fault segments as they merged to form an inherently undulose fault. Late salt evacuation (early Miocene) further deformed this fault surface.     

Climate changes detected through the world's longest sea level series

The sea level series of Stockholm in the Baltic Sea, commencing already in 1774, is analysed in various ways together with contemporary climate data, in order to investigate long-term sea level changes and their relations to climate changes.First, a study of the eustatic rise of sea level, based on annual mean sea levels, is peformed, and compared with other sea level and climate studies. It is concluded that the general climatic rise of sea level has increased significantly (99.9%) from about 0.0 mm/year during the end of the Little Ice Age, to about 1.0 mm/year during the past century, characterized by melting of glaciers. Such sea level changes due to northern hemisphere climate variations since 800 A.D. have (hitherto) probably always kept within −1.5 and +1.5 mm/year, with an average fairly close to zero.Second, an investigation of the sea level variability, also based on annual mean sea levels, is performed together with temperature and wind variabilities. It is found that the interannual sea level variability of the Baltic Sea has decreased significantly (98%) from the end of the 1700s to the beginning of the 1900s; after that it has increased significantly (95%) again. Precisely the same is found to apply to winter climate or, more specifically, to the interannual winter temperature variability and the interannual winter wind variability. The common origin of all these long-term changes turn out to be two consecutive winter wind processes over the North and Baltic Seas, especially the Baltic entrance. From the end of the 1700s to the beginning of the 1900s, there has been a rapidly decreasing number of dominating winter winds from northeast, and after that there has been an increasing number of dominating winter winds from southwest. This may indicate corresponding long-term changes in the North Atlantic Oscillation.Third, using monthly mean sea levels together with corresponding wind data, seasonal variations are investigated. The seasonal sea level variation in the Baltic Sea has increased significantly (99%) since the early 1800s, together with a shift of the maximum from late summer to early winter. It is found that the main origin is a secular change of the winter wind conditions over the Baltic entrance, with increasing southwesterly winds in early winter. This might also be related to a long-term change in the North Atlantic Oscillation.     

Mineralogy,petrography, and thermometry of the H5 chondrite Carcote,Chile

Abstract— The Carcote meteorite, detected in 1888 in the northern Chilean Andes, is a brecciated, weakly shocked H5 chondrite. It contains a few barred olivine chondrules and, even more rarely, fan-shaped or granular orthopyroxene chondrules. The chondrules are situated in a fine-grained matrix that consists predominantly of olivine and orthopyroxene with accessory clinopyroxene, troilite, chromite, merrillite, and plagioclase. The metal phase is mainly kamacite with subordinate taenite and traces of native Cu. In its bulk rock composition, Carcote compares well with other H5 chondrites so far analysed, except for a distinctly higher C content. Microprobe analyses revealed the following mineral compositions: olivine (Fa_16.5–20), orthopyroxene (Fs_14–17.5), diopsidic clinopyroxene (FS_6–7), plagioclase (An_15–20). Troilite is stoichimetric FeS with traces of Ni and Cr; chromite has Cr/(Cr + Al) of 0.86, Fe²⁺/(Fe²⁺ + Mg) of 0.80-0.88 and contains considerable amounts of Ti, Mn, and Zn. Merrillite is close to the theoretical formula Ca₁₈(Mg, Fe)₂Na₂(PO₄)₁₄, although with a Na deficiency not compensated for by excess Ca; the Mg/(Mg + Fe²⁺) ratio of the Carcote merrilite is 0.93-0.95. Kamacite and taenite have Ni contents of 5.6–7.2 and 17.1–23.4 wt%, respectively. Native Cu contains about 3.1–3.3 wt% Fe and 1.6 wt% Ni. Application of different geothermometers to the Carcote H5 chondrite yielded apparently inconsistent results. The highest temperature range of 850–950 °C (at 1 bar) is derived from the Ca-in-opx thermometer. From the cpx-opx solvus geothermometers and the two-pyroxene Fe-Mg exchange geothermometer, a lower temperature range of 750–840 °C is estimated, whereas lower and more variable temperatures of 630–770 °C are obtained from the Ca-in-olivine geothermometer. Recent calibrations of the olivine-spinel geothermometer yielded a still lower temperature range of 570–670 °C, which fits well to the temperature information derived from the Ni distribution between kamacite and taenite. Judging from crystal chemical considerations, we assume that these different temperatures reflect the closure of different exchange equilibria during cooling of the meteorite parent body.     

Magmatic inclusions and felsic clasts in the Dar al Gani 319 polymict ureilite

Abstract— Magmatic inclusions occur in type II ureilite clasts (olivine‐orthopyroxene‐augite assemblages with essentially no carbon) and in a large isolated plagioclase clast in the Dar al Gani (DaG) 319 polymict ureilite. Type I ureilite clasts (olivine‐pigeonite assemblages with carbon), as well as other lithic and mineral clasts in this meteorite, are described in Ikeda et al.(2000). The magmatic inclusions in the type II ureilite clasts consist mainly of magnesian augite and glass. They metastably crystallized euhedral pyroxenes, resulting in feldspar component‐enriched glass. On the other hand, the magmatic inclusions in the large plagioclase clast consist mainly of pyroxene and plagioclase, with a mesostasis. They crystallized with a composition along the cotectic line between the pyroxene and plagioclase liquidus fields. DaG 319 also contains felsic lithic clasts that represent various types of igneous lithologies. These are the rare components not found in the common monomict ureilites. Porphyritic felsic clasts, the main type, contain phenocrysts of plagioclase and pyroxene, and their groundmass consists mainly of plagioclase, pyroxene, and minor phosphate, ilmenite, chromite, and/or glass. Crystallization of these porphyritic clasts took place along the cotectic line between the pyroxene and plagioclase fields. Pilotaxitic felsic clasts crystallized plagioclase laths and minor interstitial pyroxene under metastable conditions, and the mesostasis is extremely enriched in plagioclase component in spite of the ubiquitous crystallization of plagioclase laths in the clasts. We suggest that there are two crystallization trends, pyroxene‐metal and pyroxene‐plagioclase trends, for the magmatic inclusions and felsic lithic clasts in DaG 319. The pyroxene‐metal crystallization trend corresponds to the magmatic inclusions in the type II ureilite clasts and the pilotaxitic felsic clasts, where crystallization took place under reducing and metastable conditions, suppressing precipitation of plagioclase. The pyroxene‐plagioclase crystallization trend corresponds to the magmatic inclusions in the isolated plagioclase clast and the porphyritic felsic clasts. This trend developed under oxidizing conditions in magma chambers within the ureilite parent body. The felsic clasts may have formed mainly from albite component‐rich silicate melts produced by fractional partial melting of chondritic precursors. The common monomict ureilites, type I ureilites, may have formed by the fractional partial melting of alkali‐bearing chondritic precursors. However, type II ureilites may have formed as cumulates from a basaltic melt.     

Monte Carlo modeling of neutral gas and dust in the coma of Comet 1P/Halley

The neutral gas environment of a comet is largely influenced by dissociation of parent molecules created at the surface of the comet and collisions of all the involved species. We compare the results from a kinetic model of the neutral cometary environment with measurements from the Neutral Mass Spectrometer and the Dust Impact Detection System onboard the Giotto spacecraft taken during the fly-by at Comet 1P/Halley in 1986. We also show that our model is in good agreement with contemporaneous measurements obtained by the International Ultraviolet Explorer, sounding rocket experiments, and various ground based observations.The model solves the Boltzmann equation with a Direct Simulation Monte Carlo technique (Tenishev, V., Combi, M., Davidsson, B. [2008]. Astrophys. J. 685, 659-677) by tracking trajectories of gas molecules and dust grains under the influence of the comet’s weak gravity field with momentum exchange among particles modeled in a probabilistic manner. The cometary nucleus is considered to be the source of dust and the parent species (in our model: H₂O, CO, H₂CO, CO₂, CH₃OH, C₂H₆, C₂H₄, C₂H₂, HCN, NH₃, and CH₄) in the coma. Subsequently our model also tracks the corresponding dissociation products (H, H₂, O, OH, C, CH, CH₂, CH₃, N, NH, NH₂, C₂, C₂H, C₂H₅, CN, and HCO) from the comet’s surface all the way out to 10⁶ km.As a result we are able to further constrain cometary the gas production rates of CO (13%), CO₂ (2.5%), and H₂CO (1.5%) relative to water without invoking unknown extended sources.