Soil discrimination using diffuse reflectance Vis–NIR spectroscopy in a local toposequence

Vis–NIR spectroscopy is nowadays presented as a possible routine method for soil sample analysis. However, there is still no consensus on which is the best multivariate statistical method to use. We propose to use principal component analysis to complete the spectral data treatment. The soil samples came from a pedological cover made up of red–yellow Latosols: 88 samples of 11 soil profiles on four toposequences were collected; clay, organic matter, silica, iron, aluminum and titanium total contents were determined; the contents of goethite, hematite, gibbsite, and kaolinite were calculated. Diffuse reflectance Vis–NIR spectroscopy at wavelengths from 400 to 2400 nm combined with principal component analysis (PCA) was sufficiently sensitive to discriminate different Latosols. Wavelengths of 700 nm and 2200 to 2300 nm were influenced by content ratios of organic matter and iron oxides (700 nm), and kaolinite and gibbsite absorption (2200 and 2300 nm). The spectral responses were affected not only by the content of these constituents, but also by the composition of the minerals, so that the same class of Latosol may have different or similar spectral responses. The role of microaggregation is discussed.     

Detection of detached forced-regressive nearshore wedges: a case study from the central-southern Siena Basin (Northern Apennines, Italy)

The detection of detached nearshore wedges formed in response to relative sea-level drops is considered one of the hottest topics in sequence stratigraphic analysis due to their importance as reservoir analogues. In fact, they usually constitute sandy and porous bodies generally encased in impermeable clay, thus presenting a good potential as traps for fluids. This paper focuses on the sequence stratigraphic analysis of the Pliocene deposits cropping out in the central-southern sector of the Siena Basin (Tuscany, Italy), a post-collisional basin of the Northern Apennines. The exposed sedimentary succession was investigated through a detailed sedimentological and stratigraphic approach, integrated by biostratigraphic analyses, aimed at a better characterization of the infilling history of this sector of the basin. Specifically, this study revealed the occurrence of repeated facies shifts that allowed the identification of two depositional sequences. In detail, a thick sand-rich body far from the basin margins, and previously considered as a turbiditic lobe, has been reinterpreted as formed in a nearshore setting during a fall in relative sea level. This body is totally encased in offshore clay, and due to the lack of physical connection with the related HST deposits, it has to be considered as a detached forced-regressive wedge. The present work led to the recognition of some sedimentological and stratigraphic features typical of falling stage systems tract deposits (e.g. presence of intrabasinal recycled materials, sedimentological evidence of a pre-existing fluvial network subsequently eroded) that can provide useful clues for the identification of detached forced-regressive nearshore wedges in core studies and poorly exposed settings.     

Biosorption of Cu(II) and Pb(II) from aqueous solutions by chemically modified spent coffee grains

In this research, spent coffee grains were modified with citric acid solutions (0.1 and 0.6 M) to increase the quantity of carboxylic groups improving its metal adsorption capacity. Added functional groups on modified and non-modified spent coffee grains were identified and quantified by attenuated total reflection Fourier transform infrared analyses and potentiometric titrations, respectively. These adsorbents were used for the removal of lead (II) and copper (II) from aqueous solutions at 30 °C and different pH in batch systems. In addition, adsorption–desorption experiments were conducted to evaluate the possibility of re-using the modified adsorbent. Potentiometric titrations data reveal that the quantity of carboxylic groups was increased from 0.47 to 2.2 mmol/g when spent coffee grains were modified with 0.1 and 0.6 M citric acid. Spent coffee grains treated with 0.6 M citric acid, achieved a maximum adsorption capacity of 0.77 and 1.53 mmol/g for lead (II) and copper (II), respectively, whereas non-modified spent coffee grains only reached 0.24 and 0.19 mmol/g for lead (II) and copper (II), respectively. Desorption of lead (II) and copper (II) achieved around 70 % using 0.1 N HCl for non-modified and modified spent coffee grains with 0.6 M citric acid. It is suggested that lead (II) and copper (II) species were adsorbed mainly on the carboxylic groups of modified spent coffee grains and these metals may be exchanged for hydrogen and calcium (II) ions during adsorption on non-modified spent coffee grains. Finally, the adsorption equilibrium was reached after 400 min for modified spent coffee grains with 0.6 M citric acid. Modified spent coffee grains are a promising option for removing metal cations from aqueous solutions due to its low cost and high adsorption capacity (about 10 times higher than the activated carbons).     

Geophysical characterization of the complex dynamics of groundwater and seawater exchange in a highly stressed aquifer system linked to a coastal lagoon (SE Spain)

Anthropogenic pressure influences the two-way interactions between shallow aquifers and coastal lagoons. Aquifer overexploitation may lead to seawater intrusion, and aquifer recharge from rainfall plus irrigation may, in turn, increase the groundwater discharge into the lagoon. We analyse the evolution, since the 1950s up to the present, of the interactions between the Campo de Cartagena Quaternary aquifer and the Mar Menor coastal lagoon (SE Spain). This is a very heterogeneous and anisotropic detrital aquifer, where aquifer–lagoon interface has a very irregular geometry. Using electrical resistivity tomography, we clearly identified the freshwater–saltwater transition zone and detected areas affected by seawater intrusion. Severity of the intrusion was spatially variable and significantly related to the density of irrigation wells in 1950s–1960s, suggesting the role of groundwater overexploitation. We distinguish two different mechanisms by which water from the sea invades the land: (a) horizontal advance of the interface due to a wide exploitation area and (b) vertical rise (upconing) caused by local intensive pumping. In general, shallow parts of the geophysical profiles show higher electrical resistivity associated with freshwater mainly coming from irrigation return flows, with water resources mostly from deep confined aquifers and imported from Tagus river, 400 km north. This indicates a likely reversal of the former seawater intrusion process.     

Stochastic Simulation Model for the Spatial Characterization of Lung Cancer Mortality Risk and Study of Environmental Factors

This paper presents a study in which the lung cancer risk in males was characterized based on a simulation model of mortality rates. Block sequential simulation of mortality rates, measured in counties of different sizes, was implemented and applied to a normal grid of continental Portugal with high spatial resolution. The uncertainty in the mortality rate measurements, directly related to differences in the population size of each county, was integrated in a block direct sequential simulation through Poisson kriging of local means and variances. Three age groups were examined: 50–59, 60–69, and 70–79 years. After the continuous geographic patterns of lung cancer risk were obtained, factors potentially associated with the main areas of risk were analyzed for southern Portugal. Thus, a defined class of land use and dry weather events, related to airborne particulate matter, were found to be associated with high-risk areas, resulting in high local spatial correlation patterns in all three age groups.     

Peridinioid dinoflagellate cysts in a Holocene high-mountain lake deposit in Italy

This paper documents the discovery of peridinioid organic walled dinoflagellate cysts in Holocene sediments of the freshwater, low-alkalinity, high mountain Lake Nero di Cornisello (Adamello mountain range, Trentino, Italy). Among the three main cyst morphotypes found in the samples, the dominant one is acavate, with a smooth and light brown colored wall, with a clear conical shape, elongated with a pointy to rounded end in the antapical-ventral part, with the epicyst broader than the hypocyst and displays a typical peridinioid archeopyle. Comparison with data available in literature, besides pointing out the general scarcity of observations on dinocysts in lakes sediments, suggested a strong morphological similarity with the marine genus Brigantedinium. This finding pinpoints the need for more detailed studies on cysts in freshwater environments offering a new tool for paleoenvironmental interpretations.     

GOLD’s coating and testing facilities for ISSIS-WSO

The interaction between Ricci scalar curvature and the baryon number current, dynamically breaks CPT in an expanding universe and leads to baryon asymmetry. Using this kind of interaction and study the gravitational baryogenesis in the Bianchi type I universe. We find out the effect of anisotropy of the universe on the baryon asymmetry for the case which the equation of state parameter, ω, varies with time.     

Stereo topographic models of Mercury after three MESSENGER flybys

From photogrammetric analysis of stereo images of Mercury obtained during three MESSENGER flybys, we have produced three digital terrain models (DTMs) that have a grid spacing of 1 km and together cover 30% of the planet's surface. The terrain models provide a rich source of information on the morphology of Mercury's surface, including details of tectonic scarp systems as well as impact craters and basins. More than 400 craters larger than 15 km in diameter are included in the models. Additionally, the models provide important test cases for the analysis of stereo image data to be collected during MESSENGER's orbital mission phase. Small lateral offsets and differences in trends between stereo DTMs and laser altimeter profiles may be due to remaining errors in spacecraft position, instrument pointing, or Mercury coordinate knowledge. Such errors should be resolved during the orbital mission phase, when more joint analyses of data and detailed orbit modeling will be possible.     

Neural network interpolation of the magnetic field for the LISA Pathfinder Diagnostics Subsystem

LISA Pathfinder is a science and technology demonstrator of the European Space Agency within the framework of its LISA mission, which aims to be the first space-borne gravitational wave observatory. The payload of LISA Pathfinder is the so-called LISA Technology Package, which is designed to measure relative accelerations between two test masses in nominal free fall. Its disturbances are monitored and dealt by the diagnostics subsystem. This subsystem consists of several modules, and one of these is the magnetic diagnostics system, which includes a set of four tri-axial fluxgate magnetometers, intended to measure with high precision the magnetic field at the positions of the test masses. However, since the magnetometers are located far from the positions of the test masses, the magnetic field at their positions must be interpolated. It has been recently shown that because there are not enough magnetic channels, classical interpolation methods fail to derive reliable measurements at the positions of the test masses, while neural network interpolation can provide the required measurements at the desired accuracy. In this paper we expand these studies and we assess the reliability and robustness of the neural network interpolation scheme for variations of the locations and possible offsets of the magnetometers, as well as for changes in environmental conditions. We find that neural networks are robust enough to derive accurate measurements of the magnetic field at the positions of the test masses in most circumstances.     

Shock‐metamorphic microfeatures in chert from the Jebel Waqf as Suwwan impact structure,Jordan

Abstract– The petrographic investigation of a shocked, chalcedony‐, quartzine‐, and quartz‐bearing allochthonous chert nodule (probably Upper Cretaceous) recovered from surficial wadi gravels in the inner parts of the central uplift of the approximately 6 km in diameter Jebel Waqf as Suwwan impact structure, Jordan, reveals new potential shock indicators in microfibrous–spherulitic silica, in addition to well‐established shock‐metamorphic effects in coarser crystalline quartz. The microcrystalline chert groundmass exhibits a macroscopic dendritic and suborthogonal fracture pattern commonly associated with thin “recrystallization bands” that intersect the pre‐existing diagenetic chert fabric. Fibrous aggregates of quartzine spherulites in chalcedony‐quartzine‐quartz veinlets locally have a shattered appearance and show conspicuous “curved fractures” perpendicular to the quartzine fiber direction (and parallel to [0001]) that commonly trend subparallel to planar fractures (PFs) in neighboring shocked quartz. Quartz exhibits PFs, feather features (FFs), and mainly single sets of planar deformation features (PDFs) parallel to the basal plane (0001) (Brazil twins) and, rarely, additional PDFs parallel to {101¯3}. Shock petrography indicates shock pressures of ≥10 GPa and high shock‐induced differential stresses that affected the chert nodule. The internal crosscutting relationships of primary diagenetic and impact‐related deformational features together with shockpressure estimates suggest that the curved fractures across quartzine spherulites might represent specific (low‐ to medium‐pressure) shock‐metamorphic features, possibly in structural analogy to basal plane PFs in quartz. The dendritic–suborthogonal fractures in the microcrystalline chert groundmass and recrystallization bands are likely related to impact‐induced shear deformation and recrystallization, respectively, and cannot be considered as definite shock indicators.