Exclusive rights to fish: Towards a rational fisheries policy

Discusses the tragedy of the commons with regard to fish resources in the North Atlantic, and points to the fact that the Atlantic cod has now been so heavily exploited that a strong regulation of fisheries is needed to preserve an exploitable stock. The author argues for exclusive economic zones dividing up the remaining loopholes among coastal nations and individually transferable quotas.     

A nonlinear tensor field and the second metric tensor

In our preceding paper {see [L. Sh. Grigorian and S. Gottlöber, Astrofizika (in press)]} we investigated a self-gravitating system consisting of a scalar field and a linear tensor field _ik= _ki with minimal coupling and with allowance for the action of vacuum polarization effects. In the present paper we investigate the case of a nonlinear tensor field _ik. The action S ⁽⁾ of the field _ik is determined by the difference R_ik — _ik, where R_ik is the space-time Ricci tensor and Rik is the analogous quantity constructed using the metric _ik=g_ik+_ik induced by _ik ( is a free parameter). Here S ⁽⁾ coincides with the previously known expression for the action of a linear field _ik. Equations of motion are derived for _ik in curved space-time. The energy-momentum metric tensor, determining the contribution of _ik to the gravitational field equations, is calculated.Translated from Astrofizika, Vol. 39, No. 1, pp. 135–144, January-March, 1996.     

Effects of water on strength and failure mode of coarse-grained granites at 300°C

Summary Deformation experiments have been performed in a triaxial compression cell at a temperature of 300°C and confining pressures up to 65 MPa using samples of homogeneous, fresh two-mica-granite (RM) and monzogranite (CM). The cylindrical specimens (d=70 mm, h=140 mm, V=540 cm³) were tested undrained under dry (105°C), as received, and water saturated conditions at deformation rates between and . The mechanical behaviour of the two types of coarse-grained, crystalloblastic granites is critically influenced by mineralogical composition, porosity, and the amount of intergranular water present in the samples. The failure stress of the CM granite is at about 65% of that of the RM granite; in both rocks strength decreases with increasing porosity and water content.The presence of interstitial water causes a failure mode of non-localized, homogeneously distributed microcracking in the central parts of the samples, whereas, in runs with dry granites, strain localization along a single shear fracture was observed. When aqueous fluids are present, the macroscopic style of deformation of granites appears to be ductile even at lowP andT conditions. Strength and angle of internal friction are reduced to very low values. The style of deformation, as well as the reduction of strength of the water-saturated rock samples, is due to mechanical and chemical effects of intergranular water at elevated temperatures.The maximum differential stresses measured for these coarse-grained granites are much lower than the strength commonly reported for other granites, e. g. Westerly and Charcoal granites. Our data suggest that the strength of the granitic crust under differential stress is lower than currently deduced from laboratory experiments.     

Seismic hazard of Egypt

Earthquake hazard parameters such as maximum expected magnitude,M _max, annual activity rate,, andb value of the Gutenberg-Richter relation have been evaluated for two regions of Egypt. The applied maximum likelihood method permits the combination of both historical and instrumental data. The catalogue used covers earthquakes with magnitude 3 from the time interval 320–1987. The uncertainties in magnitude estimates and threshold of completeness were taken into account. The hazard parameter determination is performed for two study areas. The first area, Gulf of Suez, has higher seismicity level than the second, all other active zones in Egypt.b-values of 1.2 ± 0.1 and 1.0 ± 0.1 are obtained for the two areas, respectively. The number of annually expected earthquakes with magnitude 3 is much larger in the Gulf of Suez, 39 ± 2 than in the other areas, 6.1 ± 0.5. The maximum expected magnitude is calculated to be 6.5 ± 0.4 for a time span of 209 years for the Gulf of Suez and 6.1 ± 0.3 for a time span of 1667 years for the remaining active areas in Egypt. Respective periods of 10 and 20 years were reported for earthquakes of magnitude 5.0 for the two subareas.     

Early Cretaceous volcaniclastic and quartzose sandstones from north central Nepal: composition,sedimentology and geotectonic significance

Early Cretaceous sandstones and shales from the Thakkhola region (Chukh and Tangbe Formations) were deposited on the subsiding northern (Tethyan) margin of Gondwana; current directions indicate a source area to the south. Whereas the Berriasian Chukh Formation is dominated by quartz arenites, volcaniclastic sandstones and minor conglomerates dominate the Tangbe Formation of Valanginian to Aptian age. Upsection, the composition of the volcaniclastic components changes from mainly basaltic to dominantly dacitic/rhyolitic. Magmatism was preceded and accompanied by strong uplift in the source area of the Chukh and Tangbe clastics, resulting in the erosion of probably more than several hundred meters of pre-Cretaceous sedimentary, metamorphic and plutonic rocks. A geochemical whole rock analysis of basaltic pebble fragments shows their alkaline character and suggests a within-plate geotectonic setting for the volcanic source. This volcanotectonic event is probably related to rifting between Australia and Greater India, where seafloor spreading began in late Valanginian/Hauterivian times.     

Fossil carotenoids and paleolimnology of meromictic Mahoney Lake,British Columbia,Canada

Vertical distribution of fossil carotenoids in a sediment core from meromictic Mahoney Lake was studied. Besides okenone and demethylated okenone, lutein and zeaxanthin and-carotene isomers were identified. No carotenoids typical for purple nonsulfur or green sulfur bacteria were detected. The ratio of zeaxanthin to lutein (above 1:1 in all samples) indicates a dominance of cyanobacteria over green algae in the phytoplankton assemblages of the past. Okenone, which is found exclusively in Chromatiaceae, was the dominating carotenoid in all sediment zones.The oldest sediment layers containing okenone were deposited 11 000 years ago. Between 9000 and 7000 and since 3000 years b.p., Chromatiaceae reached a considerable biomass in the lake. Vertical changes in okenone concentration were not related to changes of paleotemperatures. In contrast, okenone concentrations decreased during periods of volcanic ash input. During most of the lake history, however, mean okenone concentrations were positively correlated with sedimentation rates. This indicates that vertical changes of okenone concentration in the sediment reflect past changes of purple sulfur bacterial biomass in the lake.According to these results, the past limnology of Mahoney Lake resembled that of the present with a sulfide-containing monimolimnion and a well-developed population of okenone-bearing purple sulfur bacteria.     

Brønsted reactions on oxide mineral surfaces and the temperature-dependence of their dissolution rates

The pH-dependence of oxide dissolution rates is controlled by Brønsted acid-base reactions at the mineral surface. These reactions are rapid but depend explicitly on temperature, as do the subsequent slow rates of bond hydrolysis. The net result is that dissolution rates vary in a complicated fashion with temperature and solution pH. The enthalpy changes of acid-base reactions on oxide materials are sufficiently similar, however, that general statements can be made about their contribution. The enthalpy changes from proton adsorption to a hydroxyl functional group (SOH), or to a deprotonated functional group (SO ^–), are generally exothermic. The enthalpy changes become increasingly endothermic, however, as charge accumulates on the mineral surface and the charged species interact electrostatically. The result is that mineral dissolution rates are least sensitive to temperature, as measured with an Arrhenius-like rate law, at pH conditions near the Point of Zero Net Proton Charge.     

Synthetic zeolites formed from expanded perlite: Type,formation conditions and properties

Summary The starting material used was expanded perlite with a grain size < 40 m (74.5 wt.% SiO₂; 12.5 wt.% Al₂O₃). This material is a waste product obtained during the production of expanded perlite. The experiments were carried out with KOH solutions, mixtures of KOH and NaOH solutions (1:1) as well as NaOH solutions in the concentration range 0.5 N to 6.0 N at temperatures of between 100° and 140°C and with reaction periods of 2 hours to 13 days in closed system. In the experiments with KOH containing solutions zeolite ZK-19 (phillipsite), W (merlinoite), G (chabazite) and F (edingtonite) formed. Without addition of aluminium high percentages of zeolite ZK-19 (80–100 wt.%) and zeolite W (90–100 wt.%) were obtained. The addition of aluminium rendered possibly the formation of 90 to 100 wt.% of zeolite G and 85 to 100 wt.% of zeolite F, respectively. In the experiments with NaOH solutions analcime, zeolite Na-Pc (gismondine), zeolite HS (sodalite hydrate) and zeolite A formed. High percentages of zeolite Na-Pc (90–100 wt.%), zeolite HS (up to 100 wt.%) and analcime (up to 100 wt.%) were synthesized without addition of aluminium. The formation of high percentages of zeolite A (95–100 wt.%), however, needs the addition of aluminium, NaCI and seed crystals. The temperature stability of the zeolites decreases in the following sequence: K-F > K-W K-ZK-19 (Na), K-W Na, K-F G_si-rich (Na), K-ZK-19 >> Na-Pc G_si-poor. Zeolite A has a very good temperature stability up to temperatures of } 550 °C similar to that of zeolite K-W. At higher temperatures, however, its stability is very poor. The NH₄ ⁺-exchange capacities (meq/g) of the different zeolites amount to the following values: ZK-19:2.8 - 3.2; W:3.0 - 3.2; G:2.3 - 3.6; A:3.1 - 3.2; Na-Pc:3.5 - 3.6; F : 3.9 - 4.8.

---

Zeolithsynthese aus Blähperlit—Art, Bildungsbedingungen und Eigenschaften

Zusammenfassung Ausgangsmaterial der experimentellen Untersuchungen war Blähperlit mit einer Korngröße < 40 ,m (74,5 Gew.-% SiO₂; 12,5 Gew.-% Al₂O₃). Dieses Material ist ein Abfallprodukt, das bei der Produktion von Blähperlit anfällt. Die Experimente wurden mit KOH-Lösungen, Lösungsgemischen aus KOH und NaOH (1:1) sowie mit NaOH-Losungen im Konzentrationsbereich 0,5 n-6,0 n bei Temperaturen von 100° – 140°C und über Reaktionszeiten von 2 Stunden bis zu 13 Tagen im geschlossenen System durchgeführt. In den Experimenten mit KOH-hältigen Lösungen bildeten sich die Zeolithe ZK-19 (Phillipsit), W (Merlinoit), G (Chabasit) und F (Edingtonit). Hohe Prozentgehalte an Zeolith ZK-19 (80 – 100 Gew.-%) und Zeolith W (90–100 Gew.-%) entstehen nur ohne Zugabe von Aluminium. Die Bildung von 90–100 Gew.-% Zeolith G bzw. 85–100 Gew. % Zeolith F ist dagegen durch die Zugabe von Aluminium möglich. In den Experimenten mit NaOH-Lösungen bildeten sich die Zeolithe Analcim, Na-Pc (Gismondin), HS (Sodalithhydrat) und Zeolith A. Hohe Prozentanteile an Zeolith Na-Pc (90–100 Gew.-%), HS (bis zu 100 Gew. %) und Analcim (bis zu 100 Gew.-%) wurden ohne Aluminium-Zugabe synthetisiert. Die Bildung von hohen Gehalten an Zeolith A (95–100 Gew. %) ist jedoch nur unter Zugabe von Aluminium, NaCl und Kristallkeimen möglich.Die Temperaturbeständigkeit der Zeolithe nimmt in der folgenden Reihenfolge ab: K-F > K-W - K-ZK-19 (Na), K-W Na, K-F G_si-reich (Na), K-ZK-19 >> Na-Pc G_si-am. Zeolith A weist bis zu Temperaturen von etwa 550°C eine gute Temperaturbeständigkeit auf, die in etwa der von Zeolith K-W entspricht. Bei höheren Temperaturen ist die Beständigkeit jedoch sehr gering.Die NH⁴⁺-Austauschkapazitäten (mÄqu/g) der verschiedenen Zeolithe erreichen folgende Werte: ZK-19:2,8 - 3,2; W:3,0 - 3,2; G:2,3 - 3,6; A:3,1 - 3,2; Na-Pc:3,5 -3,6; F:3,9 - 4,8.

---

---

With 2 Figures     

Sediment budget-based estimates of trace metal inputs to a Chesapeake estuary

This article evaluates whether a sediment budget for the South River, Maryland, can be coupled with metals data from sediment cores to identify and quantify sources of historic metal inputs to marsh and subtidal sediments along the estuary. Metal inputs to estuarine marsh sediments come from fluvial runoff and atmospheric deposition. Metal inputs to subtidal sediments come from atmospheric deposition, fluvial runoff, coastal erosion, and estuarine waters. The metals budget for the estuary indicates that metal inputs from coastal erosion have remained relatively constant since 1840. Historical variations in metal contents of marsh sediments have probably resulted primarily from increasing atmospheric deposition in this century, but prior to 1900 may reflect changing fluvial sources, atmospheric inputs, or factors not quantified by the budget. Residual Pb, Cu, and Zn in the marsh sediments not accounted for by fluvial inputs was low to moderate in 1840, decreased to near zero circa 1910, and by 1987 had increased to levels that were one to ten times greater than those of 1840. Sources of variability in subtidal cores could not be clearly discerned because of geochemical fluxes, turbulent mixing, and bioturbation within the cores. The sediment-metal budgeting approach appears to be a viable method for delineating metal sources in small, relatively simple estuarine systems like the South River and in systems where recent deposition (for example, prograding marshes) prevents use of deep core analysis to identify background levels of metal. In larger systems or systems with more variable sources of sediment and metal input, however, assumptions and measurement errors in the metal budgeting approach suggest that deep core analysis and normalization techniques are probably preferable for identifying anthropogenic impacts.Field and laboratory research conducted at the Department of Geography, University of Maryland, College Park, Maryland, 20742, USAField and laboratory research conducted at the Marine and Estuarine Environmental Science Program, University of Maryland, College Park, Maryland, 20742, USA     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).