Light curves of the eclipsing systems of RS CVn-type

This work presents the light curves for rotating spotted stars generated by a computational code developed by us. This code is based in a model of the system and its analytical solution. The work also present an analysis of the photometric curve variations with the changes in the model's parameters.As a first result we have simulated a temporal evolution of the light curve when the photospheric spot varies its size and position and we reproduced some observational light curves of the II Peg star.Work supported by Dirección de Investigación, Universidad de La Serena, Chile.     

A comparison of Hα and soft X-ray characteristics of spotless and spot group flares

A comparative analysis of spotless and spot group flares recorded at Hvar and Kanzelhöhe Observatories during the 21st cycle of solar activity is presented. The rate of occurrence of two-ribbon flares was found to be significantly higher for the spotless flares. In comparison with spot group flares of corresponding H importance, the soft X-ray peak values have been systematically lower for the spotless flares. The highest peak values and the energy released in soft X-rays was found for flares with a H ribbon protruding over a major spot umbra. It was found that the effective plasma temperatures in spotless flares have been considerably lower than the temperatures in spot group flares.     

Use of immunofluorescence technique in cultured fibroblasts from Mediterranean cetaceans as new "in vitro" tool to investigate effects of environmental contaminants

The aim of the present study was to propose the immunofluorescence technique in cultured fibroblasts from Mediterranean cetaceans as a new "in vitro" tool to explore the susceptibility of these marine mammals to different xenobiotic compounds. The cell lines were cultured from integument biopsies of free-ranging and stranded cetaceans (dead within 12h). Using the indirect immunofluorescence assay, we detected endogenous proteins induced by different contaminants. Here we present the method used for qualitative and quantitative evaluation of cytochromes P450 (CYP1A1 and CYP2B) induced by some POPs (DDTs and PCBs) and emerging contaminants (PBDEs) in fibroblast cell cultures of striped dolphin (Stenella coeruleoalba) and bottlenose dolphin (Tursiops truncatus). Immunofluorescence was quantified with a specially designed Olympus macro, DetectIntZ. A major result was the possibility of using this "in vitro" assay to quantify induction of endogenous proteins.     

Diagnosis of trace metal contamination in sediments: the example of Ensenada and El Sauzal, two harbors in Baja California, Mexico

Total metal concentrations in sediments from within Ensenada and El Sauzal Harbors are generally higher than at the mouths. Grain-size analyses suggested that this enrichment could be due to the presence of fine-grained sediments in the inner part of the harbors rather than to anthropogenic perturbations. The (Me/Al)(sample) ratios for Pb, Co, Ni and Fe were significantly higher for Ensenada Harbor relative to El Sauzal Harbor, whereas the ratios for Cd, Mn, Zn and Cu were statistically equivalent for both harbors. Calculated enrichment factors [EF(Me)=(Me/Al)(sample)/(Me/Al)(shale)] indicated that the metals showing slight enrichment were those associated with anthropogenic contamination (Pb, Zn), or probably related to primary productivity in the water column (Cd, Co). The levels of most of the metals were not greatly enriched, a consideration that is of the utmost importance when contamination issues are at stake.     

Intercomparisons of earth gravity models by means of lumped coefficients: Terms for eccentricity and longitude

The comparisons of the Earth gravity field models by the order of their harmonic coefficients, performed with the basic lumped coefficients (Planet. Space Sci.29, 653, 1981, Paper I) are here extended to cover all harmonic coefficients (both odd and even degree). The lumped coefficients (the “e-terms” and “longitudinal” terms), corresponding to 18 Earth models, are compared mutually (Figs. 2–15). The large differences, observed for various models and orders, are of particular interest: they are gathered into Table 1. The result of Paper I was a little pessimistic. The same is true here: various inhomogeneities, sometimes very large, in the accuracy of the harmonic coefficients must exist—even for low orders. Most of our comments and objections, however, relate to the older Earth models, which have only a historical value now. Our comparisons are only relative ones; an actual test of the accuracy of the models (their calibration) is possible via data with independent status (Kloko?ník, 1982, 1983).     

Study on General Performance of Jack-up Under Elevated Condition

Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system bearing capacity, pre-load requirements, spud can bearing capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Distribution of soft-bottom polychaetes in two coastal areas of the Tyrrhenian Sea (Italy): Structural analysis

Multidimensional statistical analysis was used to study the polychaete distribution in soft-bottoms of two coastal areas of the Tyrrhenian Sea (Italy), which are influenced by the discharges of the rivers Tiber and Ombrone. In both areas the distributional patterns of these organisms are determined mainly by sediment types and related factors such as hydrodynamics, river input, and sedimentation. The grain-size gradient from the coast to the open sea affects not only species composition, but also species richness, diversity and abundance.In both areas three main communities have been identified: a sandy biocoenosis, a mixed-sediment biocoenosis and a muddy biocoenosis. The sandy coastal community is characterized by only a few species, while the intermediate zone of sandy-mud sediments presents the highest species richness and diversity. At the mouth of the River Tiber the influence of the river is more evident than at the mouth of the River Ombrone. This is due to the Tiber's greater river flow, which determines an environmental uniformity and a ‘cenotic continuum’ from sandy to muddy communities. This does not occur at the mouth of the Ombrone, where the river flow is less important and the polychaete communities are better defined.     

Miocene extensional detachments in the outcropping basement of the northern Alboran Basin (Betics) and their tectonic implications

Whether or not there are extensional detachment faults in the Alboran basement can be tested directly because a part of the Alboran Basin is now emerged. These detachments, related to crustal thinning beneath the Alboran Basin, occurred from the Aquitanian to Tortonian. The resulting extensional geometries can be described in general terms. During the Serravalian a considerable southwest extension of the basin took place, accompanied by south-southeast extension in the northern Gibraltar Arc. Other detachments affected by Serravalian extension can be found. The spreading of the Alboran was nearly coeval with roughly westward migration of the Gibraltar mountain front.     

Stratigraphic framework of gas accumulations in the Ría de Pontevedra (NW Spain)

Knowledge of marine geological environments in which shallow gas is accumulating is becoming increasingly important in global studies of climate change because a measurable proportion of the total methane source comes from continental margins. Previous studies have revealed that coastal environments represent important geological environments where microbial methane is being generated, is accumulating, and is being released. In the Ría de Pontevedra, at least 4.5 km² of seafloor in the innermost part of the ría is underlain by sediments containing natural gas. Seismic interpretation contributes new findings for the definition of periods and geological environments in which the gas could have been generated, and is accumulating and released in the Ría de Pontevedra. Groundtruthing the seismic data (facies, environments) makes it possible to identify favourable geological environments for gas generation in the sedimentary infill of the Ría de Pontevedra. Sequence stratigraphy based on high-resolution seismic profiles and post-Last Glacial Maximum sea-level records makes it possible to establish the stratigraphic architecture of the ría and to define the periods in which gas could have been generated. The results of this study show that the sedimentary infill is composed of a fifth-order sequence developed since the Last Glacial Maximum. Within this sequence, gas appears to have accumulated in the Holocene deposits associated with the latest transgressive and highstand system tracts. Seismic analysis shows that gas could have been generated in different geological environments in the Ría de Pontevedra. If coastal environments at times of lower sea level were similar to those of the present, organic-rich mud deposits (deposited mainly in lakes, estuaries and floodplains) could have survived transgression and remained buried as potential gas sources in the inner part of the ría.