Profiles of blue and infrared diffuse interstellar bands

The paper presents a survey of profiles of reasonably strong diffuse interstellar bands (DIBs) based on the extensive set of high-resolution spectra acquired with the aid of echelle spectrographs installed at the 2-m Terskol, 2-m Pic du Midi and 1-m SAO telescopes. The surveyed diffuse interstellar bands cover the spectral ranges of blue and near-infrared, i.e the DIBs not surveyed by Krełowski & Schmidt . The possible modifications caused by stellar and telluric lines are discussed. The very broad features such as 4430 are not discussed because the shapes of their profiles, extracted from echelle spectra, are very uncertain. The signal-to-noise (S/N) ratios of the spectra are not high enough to enable discussion of the profiles of numerous weak interstellar features discovered recently.     

Determination of Phobos’ rotational parameters by an inertial frame bundle block adjustment

A functional model for a bundle block adjustment in the inertial reference frame was developed, implemented and tested. This approach enables the determination of rotation parameters of planetary bodies on the basis of photogrammetric observations. Tests with a self-consistent synthetic data set showed that the implementation converges reliably toward the expected values of the introduced unknown parameters of the adjustment, e.g., spin pole orientation, and that it can cope with typical observational errors in the data. We applied the model to a data set of Phobos using images from the Mars Express and the Viking mission. With Phobos being in a locked rotation, we computed a forced libration amplitude of \(1.14^\circ \pm 0.03^\circ \) together with a control point network of 685 points.     

Consistent realization of Celestial and Terrestrial Reference Frames

The Celestial Reference System (CRS) is currently realized only by Very Long Baseline Interferometry (VLBI) because it is the space geodetic technique that enables observations in that frame. In contrast, the Terrestrial Reference System (TRS) is realized by means of the combination of four space geodetic techniques: Global Navigation Satellite System (GNSS), VLBI, Satellite Laser Ranging (SLR), and Doppler Orbitography and Radiopositioning Integrated by Satellite. The Earth orientation parameters (EOP) are the link between the two types of systems, CRS and TRS. The EOP series of the International Earth Rotation and Reference Systems Service were combined of specifically selected series from various analysis centers. Other EOP series were generated by a simultaneous estimation together with the TRF while the CRF was fixed. Those computation approaches entail inherent inconsistencies between TRF, EOP, and CRF, also because the input data sets are different. A combined normal equation (NEQ) system, which consists of all the parameters, i.e., TRF, EOP, and CRF, would overcome such an inconsistency. In this paper, we simultaneously estimate TRF, EOP, and CRF from an inter-technique combined NEQ using the latest GNSS, VLBI, and SLR data (2005–2015). The results show that the selection of local ties is most critical to the TRF. The combination of pole coordinates is beneficial for the CRF, whereas the combination of \(\varDelta \hbox {UT1}\) results in clear rotations of the estimated CRF. However, the standard deviations of the EOP and the CRF improve by the inter-technique combination which indicates the benefits of a common estimation of all parameters. It became evident that the common determination of TRF, EOP, and CRF systematically influences future ICRF computations at the level of several \(\upmu \)as. Moreover, the CRF is influenced by up to \(50~\upmu \)as if the station coordinates and EOP are dominated by the satellite techniques.     

3XMM J185246.6+003317 as transient neutron star

We performed an X‐ray timing and spectral analysis of the variable source 3XMM J185246.6+003317 to investigate its physical nature. The data from all observations of 3XMMJ185246.6+003317 conducted by XMM‐Newton EPIC MOS1 and MOS2 with the same instrumental setup in 2004–2009 were reprocessed to form a homogenous data set of solar barycenter corrected photon arrival times and high S/N spectra of 3XMM J185246.6+003317. A Bayesian method for the search, detection, and estimation of the parameters of a periodic signal of unknown shape was employed, as developed by Gregory & Loredo (1992, 1993). The results show that 3XMM J185246.6+003317 is a transient neutron star with the genuine spin‐period of 23.11722 (23.11711–23.11727) s and its derivative of 5.3(0.3–5.5)×10^–11 s s^–1, implying a characteristic age of 7 (6–104) kyr, if the period derivative can be ascribed to the genuine spin‐down rate of the neutron star. The rotational‐phase averaged X‐ray spectra at the different brightness periods can be fitted with a highly absorbed blackbody model with different temperatures. The phase‐folded light curves in different energy bands with high S/N ratio show a double‐peaked profile; the variations depend on time and energy, indicating that radiation emerges from at least two emitting areas. The spectra at the phases corresponding to the maxima in the phase‐folded light curve show different spectral parameters of absorbed blackbody radiation, i.e. the hotter one has a smaller size. The source is detected only from September 2008 to April 2009 with persistently decreasing brightness, but not before, even though it was observed by XMM. Hence, it is a transient neutron star or a binary system hosting it. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Instruments, Detectors and the Future of Astronomy with Large Ground Based Telescopes

Results of a survey of instrumentation and detector systems, either currently deployed or planned for use at telescopes larger than 3.5 m, in ground based observatories world-wide, are presented. This survey revealed a number of instrumentation design trends at optical, near, and mid-infrared wavelengths. Some of the most prominent trends include the development of vastly larger optical detector systems (> 10⁹ pixels) than anything built to date, and the frequent use of mosaics of near-infrared detectors – something that was quite rare only a decade ago in astronomy. Some future science applications for detectors are then explored, in an attempt to build a bridge between current detectors and what will be needed to support the research ambitions of astronomers in the future.     

First Results from SWAN Lyman α solar wind mapper on SOHO

After one year of almost flawless operation on board the SOHO spacecraft poised at L1 Lagrange point, we report the main features of SWAN observations. SWAN is mainly dedicated to the monitoring of the latitude distribution of the solar wind by the Lα method. Maps of sky Lα emissions were recorded througout the year. The region of maximum emission, located in the upwind hemisphere, deviates strongly from the pattern that could be expected from a solar wind constant with latitude. It is divided into two lobes by a depression aligned with the solar equatorial plane called the Lyα groove already noted in 1976 Prognoz data. The north lobe is much brighter than the south lobe. These two characteristics can be explained qualitatively by an enhanced ionization along the neutral sheet where the slow solar wind is concentrated, which results from the higher low-latitude solar wind mass flux as measured by Ulysses. The groove is the direct imprint on the sky of the enhanced carving by the slow solar wind, at this time of solar minimum, when the tilt angle of the neutral sheet is small. The question is still pending to predict what will happen with the ascending phase of the solar cycle. Observations of comets are briefly mentioned, with the ability of SWAN to monitor the H₂O production of many comets. Operations of the instrument are briefly described, including some instrumental problems which could be solved by software modifications sent to the instrument. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1004979605559     

The impact of fragment “L” of comet SL-9 on Jupiter

Filtergrams of high spatial and temporal resolution were obtained in the methane band centred at 892 nm during the impact of fragment L of comet Shoemaker-Levy 9 on Jupiter. The light curve shows two maxima of an emission ball observed above the limb shortly after the impact. The second maximum was the brightest and had a short life time of about 90 seconds. During it's life, the apparent height of the emission ball declined towards the surface of Jupiter; the amount of displacement is larger than the expected effect caused by Jupiter's rotation. About half an hour after the impact, a domelike feature became visible when the location of the impact rotated into the illuminated hemisphere of Jupiter.     

Literal solution for Hill's lunar problem

A computer program for the manipulation of power series in several variables is used to find the first order solution to Hill's lunar problem. The ratiom of the mean motion of the Sun to that of the Moon is kept as a formal parameter. The series inm are known to converge very poorly. It is shown how efficient algorithms among them the Lie transformation allow us to compute the series inm as far as they are needed. When the series are evaluated at Brown's numerical value form the results achieve or exceed his accuracy.     

Mercos — A simple Teflon sampler for ultratrace metal analysis in seawater

This paper describes an uncomplicated sampling technique for ultratrace element analysis of coastal and surface seawaters (maximum depth 100 m). The sampler system is very easy to operate. To prevent contamination problems, interchangeable 500-ml Teflon bottles are used as both sampling and storage vessels. The seawater samples are stabilized in situ by preacidifying the sampling bottles. For the determination of mercury in seawater the desired system has been developed: sampling bottle = storage bottle = reaction vessel.     

The stability of the Lagrangian point L4

The Hamiltonian function of the restricted problem of three bodies near the triangular Lagrangian point is normalized through sixth order terms with the help of MACSYMA. The same calculations were done previously with an algebraic processor in order to establish the stability at a critical value of the mass ratio.