The Salt Lick Creek layered intrusion,East Kimberley region,Western Australia

The Lower Proterozoic Salt Lick Creek intrusion, East Kimberley region, Western Australia, is a layered intrusion divisible into two well-defined zones, the Basal and Main Zones, whose combined stratigraphic thickness, as now exposed, is approximately 1000 metres. The Basal Zone, 360 metres thick, contains three members, two of which (Members 1 and 3) are dominated by olivine, plagioclase cumulates (including harrisites and allivalites); Member 2, near the middle of the Basal Zone, consists substantially of more olivine-rich cumulates, including plagioclase-bearing dunites. The Main Zone, commencing with Member 4 plagioclase, orthopyroxene cumulates, is composed largely of anorthositic cumulates of Member 5. Mild but nevertheless measurable rhythmic layering is superimposed upon the three members comprising the Basal Zone. Electron probe microanalyses of the primary phases across some 500 metres of cumulates indicate limited cryptic variation with stratigraphic height. Olivine ranges in composition from Fo₈₁ to Fo₈₄, orthopyroxene from Ca₂Mg₈₃Fe₁₅ to Ca₂Mg₇₈Fe₂₀, clinopyroxene from Ca₄₈Mg₄₆Fe₆ to Ca₄₄Mg₄₈Fe₈, and plagioclase from An₈₄ to An₈₈ but mineral compositions are not a simple function of stratigraphic height. It is inferred that the parental magma(s) was high-alumina mafic, intrinsically subalkaline, strongly olivine- and plagioclase-normative and in all likelihood tholeiitic in its affinities. The olivine-free cumulates of the Main Zone display a higher level of normative saturation than the cumulates of the Basal Zone but mineral and host rock chemistries, particularly 100 Mg/ (Mg+Fe²⁺) atomic ratios, are not favourable to proposals which would relate the origin of the Main Zone or the several members of the intrusion to the differentiation of a single pool of magma. It is suggested that the Main Zone, at least, derived from a separate pulse of relatively more saturated magma and that the lateral replenishment by more or less undifferentiated magma was also a fundamental and critical factor in the genesis of the Basal Zone cumulates.     

A brief overview of the ACEP project: Ecosystem Processes in the KwaZulu-Natal Bight§

This introductory paper lays the basis for this supplementary issue by briefly presenting the state of knowledge on the KwaZulu-Natal (KZN) Bight at the start of this multi-disciplinary, multi-institutional, ship-based research project that ran from 2009 to 2013. The rationale and aims of the project are also described. The project was a major component of the South African Department of Science and Technology’s African Coelacanth Ecosystem Programme (ACEP), which has been prominent in supporting research on the east coast of South Africa and the wider South-West Indian Ocean. Pivotal to this was the RS Algoa, which was made available for two 30-day surveys (winter and summer) in the KZN Bight by the Department of Environmental Affairs. Although some aspects of the bight ecology are known, much of the research is dated and fragmented, and required refreshing and consolidation in order to produce a platform upon which the understanding of the region’s ecosystem functioning could be established. Much of the oceanographic knowledge is also dated, with no dedicated surveys and significant measurements undertaken since 1989. The overarching theme of the KZN Bight project was to examine the relative importance of sources of nutrients to the central KZN coast and how these are taken up and recycled in the ecosystem, and to describe aspects of the benthic biodiversity, which is poorly described in much of this region. An ambitious project, its accessibility to a ship-based research platform and the diverse scientific skills of the participating scientists allowed considerable success, as reflected in the papers that follow.     

A method for evaluating statistical errors associated with logarithmic velocity profiles

A logarithmic velocity profile is often fitted to velocity data in order to calculate the friction velocity (u _*) and typify the surface texture by a roughness length (z _o ). A method is given for estimating the errors in these parameters as calculated by this method. An example is given in which the size of the error is compared with the fluctuations that typically occur in the time seriesu _*(t) andz _o (t).     

Deep western boundary current dynamics and associated sedimentation on the Eirik Drift, Southern Greenland Margin

Growing interest in the dynamics and temporal variability of the deep western boundary current (DWBC) in the northern North Atlantic has led to numerous studies of the modern hydrography and palaeoceanography of this current system. The DWBC is fed by the two dense water-masses that spill over the Greenland–Iceland–Scotland Ridge; Denmark Strait Overflow Water (DSOW) and Iceland Scotland Overflow Water (ISOW). These overflows entrain ambient water masses, primarily Labrador Sea Water (LSW), as they cross the Iceland and Irminger Basins before merging in the vicinity of south-east Greenland. A number of studies have been performed around the Eirik Drift, located off the southern Greenland margin, downstream of this main merging point. However, the relationship between the DWBC and the associated sedimentation at this location has yet to be fully elucidated. New hydrographic data show that the current's main sediment load is carried by only one of its components, the DSOW. Seismic surveys and sediment cores confirm that Holocene sedimentation is limited to areas underlying the most offshore part of the current, where the hydrographic data show the highest concentration of DSOW. Active sedimentation through the Holocene therefore appears to have been controlled by proximity to the sediment-laden DSOW.Our interpretation of new and historic geostrophic transport and tracer data from transects around the southern Greenland margin also suggests that the DWBC undergoes significant growth through entrainment as it flows around the Eirik Drift. We attribute this to multiple strands of ISOW following different depth-dependent pathways between exiting the Charlie Gibbs Fracture Zone and joining the DWBC. Comparison of our new data with other modern hydrographic datasets reveals significant temporal variability in the DWBC, associated with variations in the position, structure and age since ventilation of the current in the vicinity of Eirik Drift. The complexity of the current dynamics in this area has implications for the interpretation of hydrographic and palaeoceanographic data.     

Latitudinal changes in siphonophore assemblages across the Atlantic sector of the Southern Ocean

Siphonophores are commonly considered to be useful indicators of water masses and water-mass movement, but their employment as such across the wider Southern Ocean has not so far been attempted. We redress this here using archived samples, collected during January–February 1993 along a transect from Cape Town to the South African National Antarctic Expedition (SANAE) base in Antarctica, and compare the patterns generated with those determined from a prior analysis of whole assemblages at lower taxonomic resolution. Twenty-one species were identified from 18 of the original 53 samples collected, and two distinct assemblages were confirmed as separated by the Sub-Antarctic Front. That to the south was characterised by low diversity and high abundance and was dominated by cold-water specialists, whereas that to the north comprised a larger number of subtropical and temperate species at low abundance. Assemblage structure was strongly influenced by the mixed layer depth, sea surface salinity and chlorophyll a concentration, as well as mesozooplankton biomass. Congruence with the whole-assemblage study was high, indicating that this taxon can be suitably employed as a proxy in studies such as this. The study emphasises the value of archived plankton samples and makes a plea for better curation.     

The use of macroalgal species richness and composition on intertidal rocky seashores in the assessment of ecological quality under the European Water Framework Directive

The EC Water Framework Directive (WFD) suggests using abundance and species composition of intertidal seaweed communities for ecological quality classification of rocky seashores. There are two difficulties with this. According to WFD all sensitive species should be present on a shore. There is no accepted list of sensitive seaweed species and those which may be sensitive in one location may not be so in another. Second, natural successions can result in very large abundance changes of common species, e.g. from almost completely fucoid-dominated shores to almost totally barnacle-dominated shores, without any change in ecological quality. Studies have shown that numerical species richness, not the list of actual species present, is broadly constant in the absence of disturbance. The ephemeral species, possibly the sensitive members of the community, change regularly in such a way as to conserve species richness. It is proposed that species richness on a defined length of shore be used as a criterion of ecological quality. A database of species found on over 300 shores in the British Isles, under strictly controlled sampling conditions, has given ranges of values of species richness to be expected and has allowed for variations in these values due to sub-habitat variability, wave exposure and turbidity to be factored in. A major problem in applying such a tool is the lack of expertise of many workers in critical identification of seaweed species. A reduced species list has been extracted from the database using species commonly present and identifiable with reasonable certainty. A numerical index of ecological quality is proposed based on scores for various aspects of the physical nature of the habitat combined with a score for species richness which may be based on the reduced species list. The scoring system also uses further aspects of community structure, such as ecological status groups and the proportions of rhodophyta, chlorophyta and opportunist species. For this system to be effective there has to be close control of the way in which sampling is carried out to ensure a uniform level of thoroughness.     

Natural hazards,disaster management and simulation: a bibliometric analysis of keyword searches

Natural Hazards - Disasters affect millions of people annually, causing large numbers of fatalities, detrimental economic impact and the displacement of communities. Policy-makers, researchers and...     

Further Characterisation of the 91500 Zircon Crystal

This paper reports the results from a second characterisation of the 91500 zircon, including data from electron probe microanalysis, laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS), secondary ion mass spectrometry (SIMS) and laser fluorination analyses. The focus of this initiative was to establish the suitability of this large single zircon crystal for calibrating in situ analyses of the rare earth elements and oxygen isotopes, as well as to provide working values for key geochemical systems. In addition to extensive testing of the chemical and structural homogeneity of this sample, the occurrence of banding in 91500 in both backscattered electron and cathodoluminescence images is described in detail. Blind intercomparison data reported by both LA-ICP-MS and SIMS laboratories indicate that only small systematic differences exist between the data sets provided by these two techniques. Furthermore, the use of NIST SRM 610 glass as the calibrant for SIMS analyses was found to introduce little or no systematic error into the results for zircon. Based on both laser fluorination and SIMS data, zircon 91500 seems to be very well suited for calibrating in situ oxygen isotopic analyses.     

European quaternary refugia: a factor in large carnivore extinction?

The extinction of large carnivores in Europe during the Quaternary is reviewed and the potential role of glacial refugia in these extinctions is investigated using the VORTEX model for population viability analysis. A model was built for a medium sized big cat similar to the extinct Panthera gombaszoegensis utilising life history data from the modern jaguar Panthera onca. This approach highlighted the potential importance of glacial refugia in the extinction process. Even model refugia the size of the Italian peninsula did not guarantee persistence of a population over a 1000 yr time span, illustrating the role of chance in survival in such a refugium. An area the size of the largest Mediterranean island was unable to support a big cat population for a period of 1000 yr. The models also demonstrated the importance of inbreeding as a mechanism for extinction in refugia. It is suggested that repeated genetic bottlenecks during successive glaciations would tend to remove lethal recessive alleles from the population, increasing the probability of survival in refugia in subsequent glaciations. The history of extinction of large carnivores in the European Quaternary is interpreted in the light of these results. Copyright © 2002 John Wiley & Sons, Ltd.     

The inversion of data from very large three-dimensional electrical resistivity tomography mobile surveys

New developments in mobile resistivity meter instrumentation have made it possible to survey large areas with dense data coverage. The mobile system usually has a limited number of electrodes attached to a cable that is pulled along behind an operator so that a large area can be covered within a short time. Such surveys can produce three-dimensional datasets with hundreds of thousands of electrodes positions and data points. Similarly, the inverse model used to interpret the data can have several hundred thousand cells. It is impractical to model such large datasets within a reasonable time on microcomputers used by many small companies employing standard inversion techniques. We describe a model segmentation technique that subdivides the finite-element mesh used to calculate the apparent resistivity and Jacobian matrix values into a number of smaller meshes. A fast technique that optimizes the calculation of the Jacobian matrix values for multi-channel systems was also developed. A one-dimensional wavelet transform method was then used to compress the storage of the Jacobian matrix, in turn reducing the computer time and memory required to solve the least-squares optimization equation to determine the inverse model resistivity values. The new techniques reduce the calculation time and memory required by more than 80% while producing models that differ by less than 1% from that obtained using the standard inversion technique with a single mesh. We present results using a synthetic model and a field dataset that illustrates the effectiveness of the proposed techniques.