The effects of gas flaring on crops in the Niger Delta,Nigeria

Flaring of associated gas from oil exploitation has several consequences on the environment. This study explores the spatial variability effects of gas flaring on the growth and development of cassava (Manihot esculenta), waterleaf (Talinum triangulare), and pepper (Piper spp.) crops commonly cultivated in the Niger Delta, Nigeria. Data was collected on soil and atmospheric temperature and moisture at a 20-m interval, starting at 40 m from the flare point to a distance of 140 m. Lengths and widths of crop leaves, height of crop plants and cassava yields were measured at the specified distances. The amino acid, ascorbic acid, starch, and sugar constituents of the cassava yields were determined. The results suggest that a spatial gradient exists in the effects of gas flares on crop development. Retardation in crop development manifests in decreased dimensions of leaf lengths and widths of cassava and pepper crops closer to the gas flare point. Statistical analysis also confirms that cassava yields are higher at locations further away from the flare point. In addition, the amount of starch and ascorbic acid in cassava decreased when the plant is grown closer to the gas flare. High temperatures around the gas flare appear to be the most likely cause of this retardation. The waterleaf crop, on the other hand, appears to thrive better around the gas flare point.     

Weed species diversity on arable land of the dryland areas of central Tanzania: impacts of continuous application of traditional tillage practices

This paper presents findings from a study that assessed influence of continuous application of a particular traditional tillage practice on weed species richness, diversity and composition and identifies weed species with positive benefits to the communities in semi-arid areas of Mpwapwa district, central Tanzania. In this area farmers apply three different traditional tillage practices which are no-till (NT), shallow tillage (ST) and Ridging System (RT). A total of 36 farm fields were surveyed in 2006/2007 cropping season where 63 weed species from 26 families were identified. Analysis of variance indicated significant differences between practices (p < 0.05), with NT practice having highest weed species richness and diversity. Among the five more prevalent weed species appearing, Bidens lineariloba was observed to exist in all the three practices. Community representatives during focus group discussions indicated 9 weed species out of 63 identified to have beneficial uses. These species are Cleome hirta, Amaranthus graecizans, Bidens lineoriloba, Bidens pilosa, Dactyloctenium aegyptium, Launaea cornuta, Heteropogon contortus, Tragus berteronianus and Trichodesma zeylanicum. Their main uses include leaf-vegetable, medicines, fodder and materials for thatching. From this study NT has highest weed species richness and diversity which therefore suggests that much more time is needed for weeding in this practice compared to other practice which was the farmers’ concern. It was also noted that although weed species have negative effects in crop production and production costs, they still play a vital role in food security and for the health of different people in marginal areas as well as for the complete ecosystem including micro and macrofauna.     

Structural investigation of the synthetic CaAn(PO4)2 (An = Th and Np) cheralite-like phosphates

The crystallographic structures of the synthetic cheralite, CaTh(PO₄)₂, and its homolog CaNp(PO₄)₂ have been investigated by X-ray diffraction at room temperature. Rietveld analyses showed that both compounds crystallize in the monoclinic system and are isostructural to monazite LnPO₄ (Ln = La to Gd). The space group is P2₁/n (I.T. = 14) with Z = 2. The refined lattice parameters of CaTh(PO₄)₂ are a = 6.7085(8) Å, b = 6.9160(6) Å, c = 6.4152(6) Å, and β = 103.71(1)° with best fit parameters R _wp = 4.87%, R _p = 3.69% and R _B = 3.99%. For CaNp(PO₄)₂, we obtained a = 6.6509(5) Å, b = 6.8390(3) Å, c = 6.3537(8) Å, and β = 104.12(6)° and R _wp = 6.74%, R _p = 5.23%, and R _B = 6.05%. The results indicate significant distortions of bond length and angles of the PO₄ tetrahedra in CaTh(PO₄)₂ and to a lesser extent in CaNp(PO₄)₂. The structural distortions were confirmed by Raman spectroscopy of CaTh(PO₄)₂. A comparison with the isostructural compounds LnPO₄ (Ln = Ce and Sm) confirmed that the substitution of the large rare earth trivalent cations with Ca²⁺ and Th⁴⁺ introduces a distortion of the PO₄ tetrahedra.     

A neutron diffraction study of alkali cation migration in montmorillonites

Neutron powder diffraction measurements on lithium and cesium saturated montmorillonite samples before and after heat treatment at 300°C are studied, in order to undertake a complete refinement of crystal structure and unravel the migration mechanism for the interlayer cations of Li or Cs. Rietveld analysis of the corresponding diffraction patterns finds that montmorillonite crystallizes in the C2/m space group with unit cell dimensions consistent with the size of the specific interlayer cation. We show that thermal treatment affects the two types of samples in a different way. This is with respect to their unit cell dimensions and the migration of Li from the 2b to the 2c clay lattice site, in constrast to the Cs positioning which remains effectively unchanged.     

Comparative urbanization in Ghana and Kenya in time and space

There are few inter-African country urban analyses because of the continent’s enormous size and socioeconomic diversity, language barriers, and wide variations in national and regional urban research capacity. Nevertheless, comparative urban studies are critical in understanding contemporary African urbanization. In this comparative spatial and temporal analysis of Ghana and Kenya’s urbanization, we find that both countries are urbanizing rapidly and are faced with many common urban problems. Moreover, Ghana is more urbanized than Kenya and has a larger indigenous urban imprint and a more widely dispersed urban pattern. Besides their physiographic and population conditions, we trace these countries’ convergent and divergent urban trends to their shared but unique experiences of colonialism, nationalism and globalization.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

The effect of naturally acidified irrigation water on agricultural volcanic soils. The case of Asembagus, Java, Indonesia

Acid water from the Banyuputih river (pH  3.5) is used for the irrigation of agricultural land in the Asembagus coastal area (East Java, Indonesia), with harmful consequences for rice yields. The river water has an unusual composition which is caused by seepage from the acidic Kawah Ijen crater lake into the river. This unique irrigation setting allows the study of soil acidification in situ. This paper assesses the effects of volcanogenically contaminated irrigation water on the chemical properties of the agricultural soils.The changes in soil properties were evaluated by comparing samples taken from the topsoil and sub-soil (1–3 m depth) from areas irrigated with acid water and areas irrigated with neutral water. The field survey thus resulted in four soil categories. Bulk soil composition, organic matter content, moisture content and particle size distribution were determined. Reactive phases were quantified with the selective extractions 1 M KCl, 0.1 M Na-pyrophosphate and 0.2 M acid ammonium oxalate (AAO).By comparing the four soil categories it is shown that the use of the naturally polluted irrigation water has had a large influence on the chemical composition of the topsoil. The composition of the soil solution has changed over the entire investigated soil profile. Furthermore the acid irrigation water has strongly modified the composition of the reactive phases, extracted as KCl, pyrophosphate, and AAO extractable elements, and also the bulk soil composition has been significantly modified. Overall this has resulted in the net dissolution of some elements and the net precipitation of others. The changes in the reactive phases and bulk soil composition are only apparent in the topsoil (0–20 cm) but not in the deeper soil.     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

Mineralogical and geochemical alteration of Hitura sulphide mine tailings with emphasis on nickel mobility and retention

Weathering of Hitura (W Finland) nickel sulphide mine tailings and release of heavy metals into pore water was studied with mineralogical (optical and electron microscopy, X-ray diffraction) and geochemical methods (selective extractions). Tailings were composed largely of serpentine, micas and amphiboles with only minor carbonates and sulphides. Sulphides, especially pyrrhotite, have oxidized intensively in the shallow tailings in 10–15 years, but a majority of the tailings have remained unchanged. Oxidation has resulted in depletion of carbonates, slightly decreased pH, and heavy metal (Ni, Zn) release in pore water as well as in the precipitation of secondary Fe precipitates. Nevertheless, in the middle of the tailings area, where the oxidation front moves primarily downward, released heavy metals have been adsorbed and immobilized with these precipitates deeper in the oxidation zone. In contrast to what was seen in pore water pH, but in accordance with static tests of the previous studies, the neutralisation potential ratio (NPR) calculated based on the mineralogical composition and the total sulphur content suggested that tailings are ‘not potentially acid mine drainage (AMD) generating’. However, the calculated buffering capacity of the tailings resulted largely from the abundant serpentine because of the low carbonate content. Despite its slow weathering rate, serpentine may buffer the acidity to some extent through ion exchange processes in fine ground tailings. Nevertheless, in practice, acid production capacity of the tailings depends primarily on the balance between Ca–Mg carbonates and iron sulphides. NPR calculation based on carbonate and sulphur contents suggested, that the Hitura tailings are ‘likely AMD generating’. The study shows that sulphide oxidation can be significant in mobilisation of heavy metals even in apparently non-acid producing, low sulphide tailings. Therefore, prevention of oxygen diffusion into tailings is also essential in this type of sulphide tailings.     

Usefulness of geological,mineralogical, chemical and chemometric analytical techniques in exploitation and profitability studies of iron mines and their associated elements

Due to the high number of variables involved in mine profitability studies, it is often very difficult to establish connections among them in order to provide a blend of market saleable quality products. In this sense, analytical chemistry together with chemometry are essential and indispensable disciplines to tackle these studies. The aim of this work was to demonstrate the utility of these disciplines to carry out optimization studies of iron mines. For this purpose, one of the most important iron mines of the Iberian Peninsula was chosen, sited in the mountain range of Sierra Menera, near the location of Ojos Negros (Teruel, Spain). Geological, mineralogical and chemical composition of 148 samples was analyzed, corresponding to different depths of three drill holes (named TE1, TE2 and TE3). In particular, aspects concerning to chemical composition are very important, since the mean contents of certain elements, such as phosphorus, sodium and potassium, should be restricted to the established limits to prevent that companies can drive back the raw material if they do not fulfil the necessary requirements. On the other hand, the large number of analysed samples drove us to use a statistical processing of the data. Among other aspects, it provides a way to find possible connections among a high number of variables and classify samples into compositional groups sharing similar composition, in order to limit the mineralised area and to obtain enough information about the amount of those chemical elements associated to iron ores. Data obtained from all these analytical techniques were in good agreement and provide a methodology that can be of wide interest applied to different geological studies.