Sedimentary archives of the French Atlantic coast (inner Bay of Vilaine,south Brittany): Depositional history and late Holocene climatic and environmental signals

The late Holocene is of particular interest to our understanding of the evolution of coastal sedimentary systems because this period encompasses warmer and cooler periods, and rising sea level in northern Europe. Based on an approach combining AMS ¹⁴C, sedimentological and rock magnetic analyses on sediment cores complemented with seismic data collected in the macrotidal Bay of Vilaine (south Brittany), we document the depositional history of the inner bay coeval to the mid- to late-Holocene transgression in south Brittany. Correlation between sedimentary archives revealed the main sedimentary infilling phases during the last 6000 years. Four units (U1–U4) are recognized in the coastal sediment wedge of the system, corresponding to the stepwise marine invasion of the bay. We show that (1) marine inundation, due to the steep morphology of the bedrock, is diachronous between distal and proximal records. A time lag of ～1000 years is inferred over a distance of less than 5 km; (2) in the outer areas, the sedimentation has been condensed since 3000 years; (3) proximal estuarine archives offer the best record of sedimentary processes covering the last 2000 years, including the Medieval Warm Period (MWP).Correlations in proximal records in the Bay of Vilaine assess the connection between coastal sedimentary dynamics, climatic conditions and anthropogenic activities during the MWP. We match the preservation of clay deposits to increased river-borne suspended matter transported to the estuary probably as a result of accelerated land-use development (higher soil erosion) in the catchment area between ca. 880 and 1050 AD. Because the preservation of estuarine sedimentary successions is favoured when coastal wave sediment reworking is minimal, it is proposed that the prevailing climatic regime in south Brittany during the MWP likely resembled to that of the preferred negative phase of the North Atlantic Oscillation (NAO). Our data are fairly consistent with other late Holocene records from northern Europe including the Atlantic seaboard. However, they outline the difficulty in interpreting climatic and anthropogenic signatures in coastal sedimentary records where high-resolution chronologies required to unravel their respective influences are still missing.     

TITAN2D simulations of pyroclastic flows at Cerro Machín Volcano,Colombia: Hazard implications

Cerro Machín is a dacitic tuff ring located in the central part of the Colombian Andes. It lies at the southern end of the Cerro Bravo–Cerro Machín volcanic belt. This volcano has experienced at least six major explosive eruptions during the last 5000 years. These eruptions have generated pyroclastic flows associated with Plinian activity that have traveled up to 8 km from the crater, and pyroclastic flows associated with Vulcanian activity with shorter runouts of 5 km from the source. Today, some 21,000 people live within a 8 km radius of Cerro Machín. The volcano is active with fumaroles and has shown increasing seismic activity since 2004, and therefore represents a potentially increasing threat to the local population. To evaluate the possible effects of future eruptions that may generate pyroclastic density currents controlled by granular flow dynamics we performed flow simulations with the TITAN2D code. These simulations were run in all directions around the volcano, using the input parameters of the largest eruption reported. The results show that an eruption of 0.3 km³ of pyroclastic flows from a collapsing Plinian column would travel up to 9 km from the vent, emplacing a deposit thicker than 60 m within the Toche River valley. Deposits >45 m thick can be expected in the valleys of San Juan, Santa Marta, and Azufral creeks, while 30 m thick deposits could accumulate within the drainages of the Tochecito, Bermellón, and Coello Rivers. A minimum area of 56 km² could be affected directly by this kind of eruption. In comparison, Vulcanian column-collapse pyroclastic flows of 0.1 km³ would travel up to 6 km from the vent depositing >45 m thick debris inside the Toche River valley and more than 30 m inside the valleys of San Juan, Santa Marta, and Azufral creeks. The minimum area that could be affected directly by this kind of eruption is 33 km². The distribution and thickness of the deposits obtained by these simulations are consistent with the hazard map presented by INGEOMINAS (Geological Survey of Colombia) in 2002. The composite map of the simulated flow deposits suggests that after major explosive events such as these, the generation of lahars is probable.     

Constraining Holocene 10Be production rates in Greenland

The absence of a production rate calibration experiment on Greenland has limited the ability to link ¹⁰Be exposure dating chronologies of ice‐margin change to independent records of rapid climate change. We use radiocarbon age control on Holocene glacial features near Jakobshavn Isbræ, western Greenland, to investigate ¹⁰Be production rates. The radiocarbon chronology is inconsistent with the ¹⁰Be age calculations based on the current globally averaged ¹⁰Be production rate calibration data set, but is consistent with the ¹⁰Be production rate calibration data set from north‐eastern North America, which includes a calibration site nearby on north‐eastern Baffin Island. Based on the best‐dated feature available from the Jakobshavn Isbræ forefield, we derive a ¹⁰Be production rate value of 3.98 ± 0.24 atoms g a^?1, using the ‘St’ scaling scheme, which overlaps with recently published reference ¹⁰Be production rates. We suggest that these ¹⁰Be production rate data, or the very similar data from north‐eastern North America, are used on Greenland. Copyright © 2011 John Wiley & Sons, Ltd.     

The last deglaciation in the Picos de Europa National Park (Cantabrian Mountains,northern Spain)

A sedimentological and geochemical study of the Lago Enol sequence (Cantabrian Mountains, northern Spain), together with detailed geomorphological mapping, provides a first record of glacier evolution and climate change over the last 40 ka in the Picos de Europa National Park. The Enol glacier retreated from its maximum extent prior to 40 ka BP as demonstrated by the onset of proglacial lacustrine sedimentation in two glaciated depressions: the Comella hollow to the north (before 40 ka BP) and the Lago Enol (before 38 ka BP). These results support previous evidence that the maximum extent of southern European glaciers occurred earlier than in northern Europe. Alternation of homogeneous and laminated proglacial sediments during the glacier retreat illustrate a dynamic glacial evolution during the Marine Isotope Stage (MIS) 3 (40–26 ka BP). A slight warming is detected at 26 ka ago with the change from proglacial sediments (in a lake located in contact to the glacier) to glaciolacustrine sedimentation (in a non‐contact or distal lake). Finally, the onset of organic‐rich sediments took place at 18 ka ago. This last transition occurred in two phases, similarly to the North Atlantic Last Termination, suggesting a link between North Atlantic Deep Water formation oscillations and palaeohydrological variability in the Cantabrian Mountains. Copyright © 2009 John Wiley & Sons, Ltd.     

Climate change,economic growth and energy policy: A recommended U.S. strategy for the coming decades an editorial

Alan D. Hecht Director of the National Climate Program Office, an Office created by Congress in 1978 to coordinate a U.S. program of climate research and services. The office is located in the National Oceanic and Atmospheric Administration within the Department of Commerce; Bo R. Döös Member of the Swedish Academy of Sciences, is a visiting UCAR scientist (University Corporation for Atmospheric Research) in the NCPO. Views expressed in this editorial are of the authors and do not reflect any official views of UCAR or NOAA, DOC, or other federal agencies within the NCP.     

Etude de la couche limite de surface sahelienne — Experience Yantala

This paper presents data concerning the energy budget in the surface layer in the Sahel region (a semi-desert area). The results are drawn from a measurement campaign made in the Niamey region in the Niger, in April–May 1984 (the Yantala Campaign). The sensible heat flux is computed with the profile method, the ground heat flux is deduced from measurement of the temperature field, and the radiative net flux is measured directly with a balancemeter. The latent heat flux, which is deduced from the energy budget balance is very weak and within the accuracy limit of the method. The diurnal variation of the net flux is symmetrical, with a maximum at noon. On the other hand, the sensible heat flux variation is asymmetrical, with an afternoon decrease much slower than the morning increase. After 3.30 pm, it becomes higher than the net flux. This is compensated for by the sign change of the ground heat flux, whose maximum is found in the morning at 11 am. The second part of this paper shows the importance of one term in the surface-layer energy budget: the long-wave radiative divergence between the ground and the top of the surface layer in high superadiabatic conditions. We show, with a radiative model on the one hand and direct measurement of the radiative divergence on the other hand, that this term reaches several tens of W m^-2 in the superadiabatic conditions found in the Sahel region.      

The Fourier Integral Method: An efficient spectral method for simulation of random fields

The Fourier Integral Method (FIM) of spectral simulation, adapted to generate realizations of a random function in one, two, or three dimensions, is shown to be an efficient technique of non-conditional geostatistical simulation. The main contribution is the use of the fast Fourier transform for both numerical calculus of the density spectral function and as generator of random finite multidimensional sequences with imposed covariance. Results obtained with the FIM are compared with those obtained by other classic methods: Shinozuka and Jan Method in 1D and Turning Bands Method in 2D and 3D, the points for and against different methodologies are discussed. Moreover, with the FIM the simulation of nested structures, one of which can be a nugget effect and the simulation of both zonal and geometric anisotropy is straightforward. All steps taken to implement the FIM methodology are discussed.     

Dynamic faulting under rate-dependent friction

We discuss the effects of rate-dependent friction on the propagation of seismic rupture on active faults. Several physicists using Burridge and Knopoff's box and spring model of faulting have proposed that fault complexity may arise from the spontaneous development of a self-similar stress distribution on the fault plane. If this model proves to be correct, it has important consequences for the origin of the complexity of seismic sources. In order to test these ideas on a more realistic earthquake model, we developed a new boundary integral equation method for studying rupture propagation along an antiplane fault in the presence of nonlinear rate-dependent friction. We study rupture dynamics of models with single and twin asperities. In our models, asperities are places on the fault with a higher value of prestress. Othewise all fault parameters are homogeneous. We show that for models with such asperities, a slip velocity weakening friction leads to the propagation of supersonic healing phases and to the spontaneous arrest of fracture if the prestress outside the asperities is low enough. For models with asperities, we can also observe narrow slip velocity pulses, qualitatively similar to the so-called Heaton pulses observed in some earthquake accelerograms. We also observe a complex distribution of stress after the rupture that depends on details of the initial distribution of asperities and on the details of the friction law.     

Seismic activity related to the 1991 eruption of Colima Volcano,Mexico

Ten years after the last effusive eruption and at least 15 years of seismic quiescence, volcanic seismic activity started at Colima volcano on 14 February 1991, with a seismic crisis which reached counts of more than 100 per day and showed a diversity of earthquake types. Four other distinct seismic crises followed, before a mild effusive eruption in April 1991. The second crisis preceded the extrusion of an andesitic scoriaceous lava lobe, first reported on 1 March; during this crisis an interesting temporary concentration of seismic foci below the crater was observed shortly before the extrusion was detected. The third crisis was constituted by shallow seismicity, featuring possible mild degassing explosion-induced activity in the form of hiccups (episodes of simple wavelets that repeat with diminishing amplitude), and accompanied by increased fumarolic activity. The growth of the new lava dome was accompanied by changing seismicity. On 16 April during the fifth crisis which consisted of some relatively large, shallow, volcanic earthquakes and numerous avalanches of older dome material, part of the newly extruded dome, which had grown towards the edge of the old dome, collapsed, producing the largest avalanches and ash flows. Afterwards, block lava began to flow slowly along the SW flank of the volcano, generating frequent small incandescent avalanches. The seismicity associated with the stages of this eruptive activity shows some interesting features: most earthquake foci were located north of the summit, some of them relatively deep (7–11 km below the summit level), underneath the saddle between the Colima and the older Nevado volcanoes. An apparently seismic quiet region appears between 4 and 7 km below the summit level. In June, harmonic tremors were detected for the first time, but no changes in the eruptive activity could be correlated with them. After June, the seismicity decreasing trend was established, and the effusive activity stopped on September 1991.