Provenance,weathering, and paleoenvironment of the Upper Cretaceous Duwi black shales,Aswan Governorate,Egypt

The mineralogy and geochemistry of the Upper Cretaceous Duwi black shales of Nile Valley district, Aswan Governorate, Egypt, have been investigated to identify the source rock characteristics, paleoweathering, and paleoenvironment of the source area. The Duwi Formation consists mainly of phosphorite and black shales and is subdivided into three members. The lower and upper members composed mainly of phosphorite beds intercalated with thin lenses of gray shales, while the middle member is mainly composed of gray shale, cracked, and filled with gypsum. Mineralogically, the Duwi black shales consist mainly of smectite and kaolinite. The non-clay minerals are dominated by quartz, calcite, phosphate, dolomite, feldspar, with little gypsum, anhydrite, iron oxides, and pyrite. Based on the CIA, PIA, and CIW values (average?=?84, 94, 95, respectively), it can be concluded that the litho-components of the studied shales were subjected to intense chemical weathering and reflect warm/humid climatic conditions in the depositional basin. The provenance discrimination diagram indicates that the nature of the source rocks probably was mainly intermediate and mafic igneous sources with subordinate recycled sedimentary rocks (Nubia Formation). Geochemical characteristics indicate that the Duwi black shales in Nile Valley district were deposited under anoxic reducing marine environments.     

Bristen granite: a highly differentiated,fluorite-bearing A-type granite from the Aar massif,Central Alps,Switzerland

Bristen granite is a body of fine-grained leucogranite occurring in the Gotthard rail base tunnel in the Central Alps. During construction of the tunnel, Bristen granite (Brgr) has been drilled along a 600 m long section. The aplite-granite belongs to the suite of Variscan granitoid intrusions of the Aar massif and contains a variety of accessory minerals typical of highly differentiated granites. Rock forming fluorite, partly enriched in yttrium (Y) and rare earth elements (REE), is intergrown with the late Y- and REE-bearing carbonate mineral synchysite. The granite contains a variety of Ti- and Y-REE-niobates, thorite, and zircon. Compared with the calc-alkaline central Aar granite (cAgr), Bristen granite is strongly depleted in Ti, P, Mg, Sr, and Ba and shows a remarkable enrichment in incompatible elements such as Rb, Th, U, Nb, Y, HREE and F. Bristen granite is the most evolved granitoid rock of the Aar massif. The composition of Brgr is typical of post-collisional reduced (ferroan) A-type granites. The Brgr melt formed in the lower crust and crystallized from a highly differentiated melt at the cotectic point in the quartz-feldspar system close to 100 MPa and 700 °C. The Brgr intruded as a small isolated stock pre-Variscan gneisses with sharply discordant contacts. The primary igneous host of Nb, Ta, Y, U, Th and REE is biotite in addition to minor amounts of allanite, and zircon. The presence of Y-REE-fluorite, synchysite, parisite and Y- and Ti-niobates and other REE-minerals can be related to reaction of igneous biotite and primary fluorite with hydrothermal fluids. The reaction is associated with alpine metamorphism, because Y-bearing fluorite and synchysite have been reported from Alpine fissures. The transformation of primary biotite to chlorite and muscovite released the heavy metal oxides under lower greenschist facies conditions that formed the Alpine diagnostic mineral stilpnomelane at about 300 °C.     

Formation Environment of Main Brown Coal Seam in Xi-2 Minefield of Shengli Coalfield Based on Coal Ash Phase Analysis

The formation environment of the main coal seam in Shengli coal mine is analyzed, and the effect of coal ash parameters on the coal-forming environment is mainly discussed according to gray component parameters combined with other coal quality test analysis data. Results show that the hydrodynamic conditions of the main coal during coal accumulation have a general pattern of strong northeast and weak southwest, and lakeside swamp is generally in the retrograde process from south to north. The No.5 coal seam is a water entry cycle, and the No.5_lower coal is a water withdrawal cycle. The No.6 thick coal seam is formed in the peat swamp environment where the water is shallow and the groundwater activity is weak. The input of terrestrial debris material was most abundant in the formation period of No.5_lower coal, followed by No.5 coal, and that in No.6 coal is the least. Vertically, the peat swamp environment changed from weak reduction to weak oxidation to strong reducing environment. The ash yield was low to high to low from bottom to top. The organic sulfur is the main type of sulfur in the main coal seam. The weaker the hydrodynamic condition, the higher the organic sulfur content in the reduction environment, while lower organic sulfur content in the oxidation environment. The peat swamp water of No.5_lower coal is medium alkaline, and the peat swamp water of No.5 and No. 6 coals is weakly alkaline or acidic.     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

Zircon U-Pb ages and Hf isotopic characteristics of the Dehe biotite monzonitic gneiss pluton in the North Qinling orogen and their geological significance

The Dehe granitic pluton intruded the Xiahe Group which is in the core complex of the North Qinling Orogenic Belt(NQOB).It shows gneissic bedding and possesses typical S-type granite minerals such as muscovite and garnet.LA-ICP-MS U-Pb isotopic dating of the Dehe granite yielded a weighted average age of 925±23 Ma which represents the emplacement age of the pluton.Most of the εHf(t) values are negative,and the two-stage model ages are consistent with the age of the Qinling Group.The isotope data show that the Dehe granite was formed in the following geological setting:in the syn-collision setting of the NQOB in the Neoproterozoic,crustal thickening induced partial melting of materials derived from the Qinling complex,and then the maga upwelled and intruded into the Xiahe Group.The formation of the Dehe S-type granite implied the occurrence of a convergent event in the QOB during the Neoproterozoic.     

Fragmentation during Rock Falls: Two Italian Case Studies of Hard and Soft Rocks

In recent years, rock fall phenomena in Italy have received considerable attention for risk mitigation through in situ observations and experimental data. This paper reports the study conducted at Camaldoli Hill, in the urban area of Naples, and at Monte Pellegrino, Palermo, Italy. The rocks involved are volcanic Neapolitan yellow tuff (NYT) in the former area and dolomitic limestone in the latter. Both rocks, even though with different strength characteristics, have shown a significant tendency towards rock fragmentation during run out. This behavior was first investigated by comparing the volumes of removable blocks on the cliff faces (V ₀) and fallen blocks on the slopes (V _f). It was assumed that the ratio V _f/V ₀ decreases with the distance (x _f) from the detachment area by an empirical law, which depends on a coefficient α, correlated with the geotechnical properties of the materials involved in the rock fall. Finally, this law was validated by observation of well-documented natural rock falls (Palermo) and by in situ full-scale tests (Naples). From the engineering perspective, consideration of fragmentation processes in rock fall modeling provides a means for designing low-cost mitigation measures.     

Precambrian crystalline basement in southern Mongolia as revealed by SHRIMP zircon dating

Single zircon ages determined by ion microprobe (SHRIMP II) for granitoid gneisses from the southern slope of the Baga Bogd massif (Gobi-Altai, southern Mongolia) reveal several episodes of zircon growth, ranging from late Palaeoproterozoic to late Cambrian. The oldest events are documented by a zircon crystallization age for a gneiss protolith at 1519 ± 11 Ma and by a xenocrystic zircon from a dark grey augen-gneiss yielding an age of c. 1701 Ma. Discrete igneous events are recorded in granite-gneisses with protolith emplacement ages of 983 ± 6, 956 ± 3 and 954 ± 8 Ma. These ages provide the first record of early Neoproterozoic magmatic activity in this region. A much younger and discrete magmatic event is recorded by several dioritic to granitic orthogneisses which are tectonically interlayered with the older gneisses and have protolith emplacement ages between 502 and 498 Ma. These late Cambrian granitoids of calc-alkaline affinity are likely to have been emplaced along an active continental margin and suggest that the Baga Bogd Precambrian crustal fragment was either docked against the southward (present-day coordinates) growing margin of the CAOB or was a large enough crustal entity to develop an arc along its margin. We speculate that the Precambrian gneisses of this massif may be part of a crustal fragment rifted off the Tarim Craton.     

Textural evidences for dissolution of silica-rich rocks of the Ypresian phosphatic series,Gafsa-Metlaoui basin,southwestern Tunisia: implication of biogenic silica supply on genesis of fibrous clays

The present work aimed to determine the mineralogical composition of Ypresian series and to clarify the influence of the dissolution of siliceous frustules on the genesis of fibrous clay minerals. The specimens sampled from CPG trench are mainly constituted of silica-rich rocks at Mides area located at the western part of Gafsa-Metlaoui basin. The samples were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM) in order to determine texture of constituents. The data obtained indicate that the bulk rock samples are mainly made up of opal CT and clay minerals. The latter consists of palygorskite-sepiolite minerals associated with smectite and few amount of illite. The trend of mineralogical composition indicates that fibrous clay minerals are more concentrated at the upper part. SEM observations indicated that palygorskite mineral appears as thread-like facies, which surround foliated texture of smectite in the lower part of the Mides section, although with the low Mg activity confirmed by the absence of dolomite. But, at the upper part of the Mides section, SEM observations revealed the occurrence of siliceous frustules, which have numerous dissolved areas and replacement of carbonate tests by silica. The dissolution saturated the depositional environment with silica which is required for the formation of palygorskite and sepiolite minerals, in addition to high Mg activity confirmed by the presence of dolomite in the bulk rock, which is required basically for the formation of sepiolite. Although the genesis mode of palygorskite and sepiolite is similar with very little difference, the genesis of sepiolite needs a high alkalinity than the formation of palygorskite.     

Enhancement of removal efficiency of ammonia nitrogen in sequencing batch reactor using natural zeolite

Two sets of lab-scale sequencing batch reactors (SBR), i.e., control SBR and SBR using zeolite as carrier (zeo-SBR), were applied to assess nitrogen removal efficiency. The test results revealed that zeolite powder added in SBR could improve its performance. Due to the combination of zeolite adsorption for NH₄ ⁺–N and enhanced simultaneous nitrification and de-nitrification (SND), a higher removal ratio of ammonia nitrogen in wastewater was observed in the test reactor, and the introduction of zeolite powder was helpful to inhabit sludge bulging comparing with the control SBR, in other words, activated sludge immobilized by zeolite powder could remove NH₄ ⁺–N, COD, and PO₄ significantly in a shorter cycle time. Applied two hydraulic retention times (HRTs) showed that the nitrogen and phosphorus removal could be improved while adapting to load variations.     

Sorption behaviour of pentachlorophenol in sub-Saharan tropical soils: soil types sorption dynamics

In order to predict exposure risks as well as appropriate remediation strategies for pesticides in soils, knowledge of pesticides sorption processes onto various representative soils is vital. Hence, laboratory batch experiments were carried out to study sorption of a pesticide, pentachlorophenol (PCP), on five soils obtained from different sub-Saharan agro-ecological zones (AEZs) in order to understand sorption equilibrium, kinetics, and thermodynamics. Experimental data showed that sorption equilibrium was attained within 24 h. The fitting of kinetic results and equilibrium data to different models suggested partly surface adsorption and partly partitioning of PCP within voids of the various soil components. Sorption was mainly attributed to sharing or exchange of valence electrons between negatively charged PCP molecules and positively charged soil sorption sites. The sorption process was spontaneous and accompanied by decreased entropy, but was pH and temperature dependent, reducing with increase in pH and temperature. The various soils’ PCP sorption capacities were directly proportional to their cation exchange capacities. The low PCP sorption observed in these soils suggested high risk of PCP being present in soil water solution, especially at higher temperatures, which can lead to contamination of the aquifer. This risk may be higher for soils obtained from AEZs with warmer natural temperatures.