贵阳市某岩溶地区地下汽油污染物运移特征分析

岩溶地区地质环境脆弱,防污能力差,特别是浅埋藏岩溶发育地区,地下水具有易污染性。本文以贵阳市某加油站10年前发生的油灌泄漏污染为例,分析了汽油污染物在岩溶水中的运移特征。调查结果表明(1)汽油污染物运移受包气带的岩性、结构、厚度以及地形坡度、地下水流速等的影响,主要沿岩溶管道、基岩面、裂隙运移;(2)汽油污染物优先在断裂、裂隙、溶缝、溶洞等通道中迁移扩散,以侧向运移为主,垂向次之;(3)有机污染物除了随地下水流动而迁移外,还会发生弥散作用,在基岩隆起部位或地形较高部位,这种现象更为明显;(4)受限于红粘土本身对污染物的拦截吸附作用,污染物向上浸染扩散程度并不高,只有最靠近基岩面的那一部分才会遭受油类污染物的浸染;(5)汽油污染物长期着在岩溶管道壁、岩溶裂隙、土岩接触面上,具有难迁移、难消除的特点。      

航空瞬变电磁法的全时域视电阻率计算方法

鉴于ATEM数据量大质低的特点,视电阻率仍是最有效而直观的参数.本文给出了适用于ATEM多种观测条件下(包括各种装置类型,发送波形,关断电流等情况)的全时域视电阻率的计算方法,并对典型层状大地模型的理论瞬变电磁响应作了全时域视电阻率及其对应等效深度的计算.结果表明,全时域视电阻率随等效深度变化的曲线可定性反映地下介质电性特征,并可近似估计低阻或高阻层上界面深度.对于非单调下降的瞬变电磁曲线,该方法也能取得较好的计算结果.     

A PRELIMINARY STUDY ON UPPER CRUSTAL VELOCITY STRUCTURE IN THE THREE GORGES RESERVOIR AREA

In this paper, using the double difference tomography method, the P wave and S wave velocity structures of the earth's crust beneath the Three Gorges Reservoir are inversed based on the high-resolution seismic data of seismological stations recorded from March 2009 to December 2010. According to the research results, the P wave and S wave crust velocity zones in the Three Gorges Reservoir area show a high V_P value area and a V_S value area with value low in the lower part and high in the upper part, distributing respectively at both sides of Shennongxi River to western Xietan in the north of Badong and near the outlet of the Xiangxi River at the northern section on Xiannvshan Fault. In the region from the two sides of Shennong River in the north of Badong to the western Xietan, microseisms are distributed in three zones in near east-west direction, with steep and north-dipping sections, spreading along the high-to-low velocity transition zone of the P and S wave. On the northern section of Xiannvshan Fault, small earthquakes are distributed along the NNW-trending Xiannvshan Fault, and the geological section reveals a steep and linear distribution along the transitional zone between the high V_P value area and the V_S value that is low in the upper and high in the lower part. Joint inversion results show a good consistency of the planes of the microseisms with the distribution of active faults.     

DATA COMPARATIVE ANALYSIS BETWEEN SFM DATA AND DGPS DATA: A CASE STUDY FROM FAULT SCARP IN THE EAST BANK OF HONGSHUIBA RIVER,NORTHERN MARGIN OF THE QILIAN SHAN

With the development of the techniques acquiring high-resolution digital terrain data,the digital terrain data acquisition technology has been widespread applied to the geoscience research.A revolutionary,low-cost and simply operative SfM (Structure from Motion) technology will make obtain high-resolution DEM data more convenient for researches on active tectonics.This paper summarizes the basic principles and workflows of SfM technology and processes and selects the Hongshuiba River area along the northern margin of the Qilian Shan to conduct data collection.We use a series of digital pictures to produce a texture with geographic information,in which data resolution is 6.73cm/pix and average density of point cloud is 220.667 point/m².The coverage area is 0.286km².Further,in order to compare the accuracy between SfM data and differential GPS (DGPS) data in details,SfM data are vertically shifted and tilt-corrected.After optimizing corrections of SfM data,the absolute value of elevation difference between two data substantially concentrates around 20cm,roughly equivalent to 2-folds of data error only after the elevation error correction.Elevation difference between two data is 10~15cm in 90% confidence interval.The maximum error is about 30cm,but accounts for less than 10%.Along the direction of fault trace,the height of fault scarp extracted from SfM data shows that vertical displacement of the latest tectonic activity in the east bank of Hongshuiba River is about 1m,and some minimum scarps height may be 0.3m.The results show SfM technology with high vertical accuracy can be able to replace differential GPS in high-precision topographic survey.After correcting of SfM data,elevation difference still exists,which may be associated with methods of generating DEM and SfM data accuracy,which in turn is controlled by the number and distribution of Ground Control Points (GCPs),photos density and camera shooting height,but also related to surface features,Fodongmiao-Hongyazi Fault     

中主应力对击实黄土强度和变形特性的影响

为研究中主应力对击实黄土强度和变形特性的影响,利用空心圆柱扭剪仪对击实黄土进行主应力轴方向为0°的定向剪切试验,重点探讨中主应力系数b对剪切过程中击实黄土强度和变形的影响。试验结果表明,在不同中主应力系数下试样的广义剪应力-应变曲线发展模式基本相同,其曲线差异不显著,剪切后期试样表现出显著的延性特性。中主应力对击实黄土的强度影响较大,b=0.25时归一化强度最大,而b=0.5时最小。当b从0到0.25时强度增加;当b=0.25时强度达到峰值,随着b的继续增加,强度迅速减小;当b=0.5时强度达到最小值,随着b的进一步增加,强度先增大后减小。随着中主应力系数b的增加,击实黄土的有效内摩擦角呈现增大的趋势,强度参数在b=0时最小,b=0.75时最大,b=1(三轴拉伸)高于b=0(三轴压缩)。     

2014年云南景谷6.6级地震前后活动能量场分析

本文将地震释放能量作为地震活动场的基本要素, 采用自然正交函数展开方法, 系统研究2014年景谷6.6级地震震中区域地震活动能量场的时空特征。 结果表明, 景谷6.6级地震前能量场的前4个主要特征值对应的典型能量场时间因子都出现明显上升变或下降异常, 空间等值线形成局部能量高值异常危险区, 可能是景谷 6.6级地震空间异常的中短期特征。 我们还进一步研究了景谷6.6级地震前后空间异常随时间的演变, 给出了异常发展变化模式, 最后应用研究地震资料的累积次数从物理角度解释异常形成的机制。     

高原寒冷地区温拌沥青混合料水稳性能分析

为探讨高原寒冷地区温拌沥青混合料的水稳定性及性能衰变规律,采用多次冻融循环室内试验模拟混合料所处环境温差大、冻融频繁、气温低等特性,选取Aspha-min、Sasobit、Evotherm等不同类型温拌剂拌制混合料,通过冻融劈裂试验、冻融飞散试验等,分析热拌与温拌沥青混合料的水稳性能及其衰变趋势,定量说明频繁的冻融循环对其性能的影响。结果表明：气候因素长期作用下,热拌沥青混合料的水稳性能优于温拌沥青混合料;随着冻融循环次数的增加,混合料的水稳性能均逐渐下降,15~18次冻融循环后,水稳性能趋于稳定,建议在高寒地区选取15次冻融循环作用次数作为沥青混合料水稳性能评价的试验条件;在选取的3种温拌沥青混合料中,Aspha-min温拌沥青混合料的水稳性能最差。     

万年县神农宫旅游资源综合评价与开发对策

溶洞作为一种重要的旅游资源,以其幽、奇、险等特点得到了广泛的旅游开发。科学、合理地对旅游资源开发价值进行评价是旅游开发的前提和基础。文章以万年县神农宫为研究对象,采用层次分析法和模糊综合评判法对其岩溶洞穴旅游资源的开发价值进行了系统评价,结果表明:神农宫的评价得分为87.38分,为优良级旅游资源,具有较高的旅游开发价值。在进行综合评价的基础上,将神农宫旅游资源的评价因子分为高开发价值和中低开发价值两个层级,并提出了相应的开发建议。      

鄂尔多斯盆地华池地区三叠系延长组长7段富有机质页岩岩相特征

鄂尔多斯盆地三叠系延长组长7油层组发育富有机质页岩和泥岩,目前已成为鄂尔多斯盆地页岩油气勘探的重要层位。综合岩心精细描述、薄片微观结构观察和粒度分析结果,将富有机质页岩和泥岩划分为黑色页岩岩相、纹层状泥岩岩相、粉砂质泥岩岩相。粉砂质泥岩岩相的脆性矿物含量高于黑色页岩岩相和纹层状泥岩岩相,后者比前者具有更高的黄铁矿含量,3种岩相的黏土矿物含量较接近。黑色页岩岩相有机质丰度高,有机质类型以I型干酪根为主,是最有利的富有机质岩相类型,其次为纹层状泥岩岩相。长7油层组沉积时期水体为分层的厌氧环境,有利于有机质的保存,低等水生生物是主要的母质来源。黑色页岩岩相和纹层状泥岩岩相形成于安静、缺少陆源碎屑影响的深湖环境下;粉砂质泥岩岩相形成于受陆源碎屑频繁影响的环境,有较多的陆源高等物质输入湖盆中,造成有机质类型复杂。将岩心精细描述和测井信息紧密结合,揭示了各类岩相纵向发育特征。受基准面变化和沉积物供给能力影响,长73以黑色页岩岩相和纹层状泥岩岩相为主,长72和长71以纹层状泥岩岩相和粉砂质泥岩岩相为主。长73暗色泥岩和页岩的岩相类型好,发育页理缝和纹层缝,有机质类型好、丰度高,是最有利的页岩油气勘探目的层系。     

安徽怀宁泉涧冲银多金属矿床地质特征及找矿标志

安徽怀宁泉涧冲银多金属矿区位于长江中下游铜铁（多金属）成矿带黄梅-怀宁成矿区,区内董岭背斜核部洪镇岩体侵入形成“底辟侵入-伸展-层滑构造”构成本区的基本构造格架,与构造和岩浆热液作用有关的银铅锌多金属矿床普遍发育。通过对本矿区银多金属矿床地质特征及找矿标志的研究,认为炭硅质板岩与碳酸盐岩界面是有利的成矿部位,强烈的岩浆活动为成矿提供了大量含矿热液,北东向滑脱构造是本区主要的导矿、赋矿构造,特殊的构造部位是银多金属矿重要的赋存场所。