Size and shape evolution of pores in a viscoplastic matrix under compression

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.     

Resonant and Secular Families of the Kuiper Belt

We review ongoing efforts to identify occupants of mean-motion resonances(MMRs) and collisional families in the Edgeworth–Kuiper belt. Directintegrations of trajectories of Kuiper belt objects (KBOs) reveal the 1:1(Trojan), 5:4, 4:3, 3:2 (Plutino), 5:3, 7:4, 9:5, 2:1 (Twotino), and 5:2 MMRsto be inhabited. Apart from the Trojan, resonant KBOs typically have largeorbital eccentricities and inclinations. The observed pattern of resonanceoccupation is consistent with resonant capture and adiabatic excitation bya migratory Neptune; however, the dynamically cold initial conditions priorto resonance sweeping that are typically assumed by migration simulationsare probably inadequate. Given the dynamically hot residents of the 5:2 MMRand the substantial inclinations observed in all exterior MMRs, a fraction ofthe primordial belt was likely dynamically pre-heated prior to resonancesweeping. A pre-heated population may have arisen as Neptune gravitationallyscattered objects into trans-Neptunian space. The spatial distribution of Twotinosoffers a unique diagnostic of Neptune's migration history. The Neptunian Trojanpopulation may rival the Jovian Trojan population, and the former's existence isargued to rule out violent orbital histories for Neptune. Finally, lowest-order seculartheory is applied to several hundred non-resonant KBOs with well-measured orbitsto update proposals of collisional families. No convincing family is detected.     

REGIONAL DEMOGRAPHIC STRUCTURE OF THE UNITED STATES

This paper analyzes the surprisingly great variation in demographic character across the states, utilizing data on fertility, mortality, age, sex, mobility, household character, abortion, race and ethnicity. A fairly simple regional pattern is revealed that is less related to levels of economic development than to long-standing historical cultural differences.     

Investigation of ion beam techniques for the analysis and exposure of particles encapsulated by silica aerogel: Applicability for Stardust

Abstract— In 2006, the Stardust spacecraft will return to Earth with cometary and perhaps interstellar dust particles embedded in silica aerogel collectors for analysis in terrestrial laboratories. These particles will be the first sample return from a solid planetary body since the Apollo missions. In preparation for the return, analogue particles were implanted into a keystone of silica aerogel that had been extracted from bulk silica aerogel using the optical technique described in Westphal et al. (2004). These particles were subsequently analyzed using analytical techniques associated with the use of a nuclear microprobe. The particles have been analyzed using: a) scanning transmission ion microscopy (STIM) that enables quantitative density imaging; b) proton elastic scattering analysis (PESA) and proton backscattering (PBS) for the detection of light elements including hydrogen; and c) proton‐induced X‐ray emission (PIXE) for elements with Z > 11. These analytical techniques have enabled us to quantify the composition of the encapsulated particles. A significant observation from the study is the variable column density of the silica aerogel. We also observed organic contamination within the silica aerogel. The implanted particles were then subjected to focused ion beam (FIB) milling using a 30 keV gallium ion beam to ablate silica aerogel in site‐specific areas to expose embedded particles. An ion polished flat surface of one of the particles was also prepared using the FIB. Here, we show that ion beam techniques have great potential in assisting with the analysis and exposure of Stardust particles.     

Longitudinal dispersion compensation for the Very Large Telescope Interferometer

The Very Large Telescope Interferometer [1,13] will be operated in air which will introduce small optical path fluctuations due to internal turbulence [4,6] and dispersion effects. Both may contribute to fringe contrast decrease. Longitudinal dispersion effects can be corrected by inserting an appropriate glass of variable thickness in one arm of the interferometer [3,5,11,12]. This paper presents a new method applied to VLTI in order to select the optimum glass, according to both the observing wavelength and the spectral bandpath, and to calculate its thickness. Results are presented in terms of improvement on the fringe contrast.     

The Dergaon (H5) chondrite: Fall,classification, petrological and chemical characteristics,cosmogenic effects,and noble gas records

Abstract— A multiple fall of a stony meteorite occurred near the town of Dergaon in Assam, India, on March 2, 2001. Several fragments weighing <2 kg and a single large fragment weighing ～10 kg were recovered from the strewn field, which extended over several tens of square kilometers. Chemical, petrographic, and oxygen isotopic studies indicate it to be, in most aspects, a typical H5 chondrite, except the unusually low K content of ～340 ppm. A cosmic ray exposure of 9.7 Ma is inferred from the cosmogenic noble gas records. Activities of eleven cosmogenic radionuclides were measured. ²⁶Al and ²²Na activities as well as the ²²Na/²⁶Al activity ratio are close to the values expected on the basis of solar modulation of galactic cosmic rays. The low ⁶⁰Co activity (<1 dpm/kg) is indicative of a small preatmospheric size of the meteorite. Cosmic ray heavy nuclei track densities in olivine grains range from ～106 cm^?2 in samples from the largest fragment to approximately (4–9) × 105 cm^?2 in one of the smaller fragments. The combined track, radionuclide, and noble gas data suggest a preatmospheric radius of ～20 cm for the Dergaon meteorite.     

Structural development along the Billefjorden Fault Zone in the area between Kjellströmdalen and Adventdalen/Sassendalen, central Spitsbergen

The Billefjorden Fault Zone represents a major lineament on Spitsbergen with a history of tectonic activity going back into the Devonian and possibly earlier. Recent structural, sedimcntological and stratigraphical investigations indicate that most of the stratigraphic thickness variations within the Mesozoic strata along the Billefjorden Fault Zone south of Isfjordcn are due to Tertiary compressional tectonics related to the transpressive Eocene West-Spitsbergen Orogeny. No convincing evidence of distinct Mesozoic extensional events, as suggested by previous workers, has been recognized. Tertiary compressional tectonics are characterized by a combined thin-skinned/thick-skinned structural style. Decollement zones arc recognized in the Triassic Sassendalen Group (tower Décollement Zone) and in the Jurassic/Cretaceous Janusfjellet Subgroup (Upper Décollement Zone). East-vergent folding and reverse faulting associated with these decollement' zones have resulted in the development of compressional structures, of which the major arc the Skolten and Tronfjellct Anticlines and the Advcntelva Duplex. Movements on one or more high angle east-dipping reverse faults in the pre-Mesozoic basement have resulted in the development of the Juvdalskampcn Monocline, and are responsible for out-of-sequence thrusting and thinning of the Mesozoic sequence across the Billefjorden Fault Zone. Preliminary shortening calculations indicate an eastward displacement of minimum 3-4 km, possibly as much as 10 km for the Lower Cretaceous and younger rocks across the Billefjorden Fault Zone.     

The tidal stripping of satellites

We present an improved analytic calculation for the tidal radius of satellites and test our results against N -body simulations.
The tidal radius in general depends upon four factors: the potential of the host galaxy, the potential of the satellite, the orbit of the satellite and the orbit of the star within the satellite . We demonstrate that this last point is critical and suggest using three tidal radii to cover the range of orbits of stars within the satellite. In this way we show explicitly that prograde star orbits will be more easily stripped than radial orbits; while radial orbits are more easily stripped than retrograde ones. This result has previously been established by several authors numerically, but can now be understood analytically. For point mass, power-law (which includes the isothermal sphere), and a restricted class of split power-law potentials our solution is fully analytic. For more general potentials, we provide an equation which may be rapidly solved numerically.
Over short times (≲1–2 Gyr ∼1 satellite orbit), we find excellent agreement between our analytic and numerical models. Over longer times, star orbits within the satellite are transformed by the tidal field of the host galaxy. In a Hubble time, this causes a convergence of the three limiting tidal radii towards the prograde stripping radius. Beyond the prograde stripping radius, the velocity dispersion will be tangentially anisotropic.     

Optical properties of solid and liquid sulfur at visible and infrared wavelengths

Knowledge of the optical constants of elemental sulfur has potential applications to Venus, Jupiter, Io, Amalthea, and the Earth. The real part, n, of the index of refraction of liquid sulfur (at 133°C) and of solid orthorhombic sulfur (at 25°C) for the wavelength range 0.4–2.0 μm were measured ellipsometrically. The imaginary part, k, of the refractive index of liquid sulfur was obtained by transmittance measurements at the same temperature and wavelength range. The reflectance of semi-infinite slabs of solid and liquid sulfur is calculated using the measured n and k values. We confirm that sulfur melts on Io would be classified as “black” by the Voyager imaging system.