Silurian-Devonian and Jurassic Thermal Events in the Ordos Basin, China: Indications from K-Ar Dating on Illites

In the Ordos basin, two distinct thermal events of different ages have been identified for the first time by means of K-Ar dating combined with illite crystallinity analysis. For the Late Triassic and Late Permian samples, the K-Ar ages of the < 0.2μm fractions (159-173 Ma) reflect an illitization age related to the Yanshanian movement and indicate a short thermal event in the Middle Jurassic; the K-Ar ages of the <2 μm fractions (210-308 Ma) are interpreted as mixed ages of detrital material and authigenic illites. The K-Ar ages of both < 0.2μm and < 2μm fractions of a Middle Cambrian sample (368 Ma and 419 Ma) correspond to the ages of the metamorphism and earliest granite intrusion in the northern Caledonian Qinling fold zone (380-420 Ma) and show a thermal event during Silurian-Devonian time.     

鄂尔多斯盆地志留—泥盆纪和侏罗纪热事件—伊利石K—Ar年龄证据

利用伊利石K-Ar测年法,结合伊利石结晶度分析,首次在鄂尔多斯盆地确定出两期不同时代热事件。晚三叠世和晚二叠世<0.2μm粒级的岩石样品的K-Ar年龄(159-173Ma)反映了与燕山运动有关的伊利石化年龄,指示有一期中侏罗世的热事件;其<2μm粒级的K-Ar年龄(210-308Ma)则被解释为碎屑物和自生伊利石的混合年龄。中寒武世<0.2μm和<2μm粒级的岩石样品K-Ar年龄(368Ma与419Ma)对应于北秦岭加里东褶皱带变质作用与最早期花岗岩侵入的时代(380-420Ma),表明在志留-泥盆纪发生了一期热事件。     

Plastic velocity vector diagrams applied to indentation and transpression in the Alps

Alpine collision tectonics has affected the European Alps for more than 110 Ma and is probably still active today. The cumulative large-scale convergence in the Alps adds up to 1100 km. About 500 km of this convergence can be budgeted by escape tectonics, 300 km by continental and oceanic subduction, and an equal amount by crustal thickening. Considerable uncertainty still exists as to the kinematics of the collision; a transpressive indentation of a more or less rigid “Italy/Adria” block into a deformable European plate appears likely. In recent surveys of horizontal mass transfer in the Alps, as inferred from structural analyses, a dominant westwards directed flow regime has been recognized. Theoretical indentation models have been applied to explain the palaeo-flow field. The flow can be explained by: Case I normal indentation without transpression but a space restriction to the east. A palinspastic space restriction did not exist, on the contrary, remnant oceanic terrain survived longest in the east; Case II dextral transpression with no significant indentation. This would require an age progression of westward flow from the east (oldest) to the west (youngest) which is not observed; and Case III transpressive indentation with a sinistral shear component. This seems to be the most satisfactory solution as it explains large-scale sinistral lineaments, and leaves palinspastic space for the rapid rotation of Corsica and Sardinia.     

Design and analysis of the Sydney deepwater ocean outfall environmental monitoring programme: a critique

The Sydney Environmental Monitoring Programme (EMP) measured the environmental performance of Sydney's new deepwater sewage outfalls against a wide range of criteria related to impacts on marine ecosystems and on human use of marine resources. It consisted of a number of interacting studies conducted during the period 1989 to 1993. Given that all the studies have now been finalized and the data analysed and presented (see papers in this volume), it is appropriate to review the program as a whole and identify, with the benefit of hindsight, where things could have been done better. This paper focuses mainly on the experimental design and statistical treatment of the studies conducted, although management problems are also briefly addressed. Overall it is concluded that the studies making up the EMP contributed greatly to enhancing our understanding of the marine environment of the coastal shelf off Sydney, an area which had previously received only limited attention. Most of the studies, however, suffered from deficiencies in experimental design, which was difficult to overcome when analysing the data. It will be important, in designing future integrated monitoring studies, to draw on the experience of programs such as this to avoid some of the pitfalls which appear to be inherent in these types of large programs.     

Non-destructive damage evaluation of a structure from limited modal parameters

A method to predict structural damage in its location and severity from modal characteristics of the damaged structure is proposed. No a priori knowledge of the modal characteristics of a corresponding baseline structure is required in the proposed formulation. Instead, information on the geometry of the structure which is reflected in its mass and stiffness distribution is needed. From matrix structural analysis, a system of equations is generated which relates the relative change of stiffness of structural members to a load vector generated from modal parameters of the damaged structure. Different solution techniques are suggested to determine the damage from the generated equations. The feasibility of the proposed formulation is demonstrated via a numerical example of a 10-storey building. Further, an error investigation on the error in the damage predictions due to uncertainties in the input data is carried out.     

Volatiles in pillows of the Mid-Ocean-Ridge-Basalt (MORB) and vitreous basaltic rims

Temperature-resolved analyses of volatiles from Mid-Ocean-Ridge-Basalt (MORB) and vitreous basaltic rims were carried out to investigate the total volatile contents of basaltic melts and the influence of magma contamination on the degassing behaviour of volcanic rocks.With respect to the sources of methane evolution from the MORB the investigations are taken into consideration, the hydrocarbon (HC) release especially from the melt.The current paper presents data for H₂O, CO₂, SO₂, He, H₂, HF, HCl, CO, N₂, O₂, and HC degassing profiles of samples from the MORB sampling cruise 02.10.1983-11.11.1983 with FS Sonne 28 during the GEMINO-1 project near the Carlsberg Ridge (CR) and the Mid-Indian-Ocean-Ridge (MIOR).It aims to estimate the magnitude and nature of source magma volatiles and contamination (crustal material, seawater, atmospheric gases).The degassing of H₂O, CO₂, HCs as well as sulphur and chlorine species, or O₂ from vitreous specimens shows characteristic differences associated with sample position with respect to the lava surface.From the water release by bubbling and diffusion above 700 °C it must be concluded that any assimilation of sea water in vitreous rim is very low. The water content in the vitreous rim is about 0.1-0.2 wt%. The low interaction of melt with sea water is supported by the missing of a significant release of chlorine species during the heat treatment of the sample up to 1450 °C.Mixed H₂O/CO₂ bubbles escape between 700 and 800 °C from the vitreous rim. The CO₂ release in the temperature range of 1060-1170 °C from the basalt and the vitreous rim is interpreted as an indication for the primary carbon-dioxide content in the melt.Above 1100 °C CO₂ and SO₂ are evolved by both diffusion and small bubbles. The quantities of CO₂ in the vitreous rim and the basalt are similar (between 0.05 and 0.15 wt%), whereas the quantities of SO₂ escaping both from the vitreous rim and the crystalline basalt are between 0.013 and 0.024 wt%.Simultaneous with the CO₂ release by bubbling, HC species, especially CH fragments, were observed. The fact that the temperature of release maxima are above 1050 °C in both the vitreous rim and in the basalt is an indication for a geogenetic origin of HCs, e.g. methane.A low temperature of release for methane, which is consistent with biogenetic HC, was observed from the gas-release profiles of the basalts only. The maxima of the low-temperature gas releases are between 80 and 200 °C with a high correlation between the fragments m/z 13 and m/z 15. This correlation is a significant indication for a methane release.The oxygen release profiles of vitreous and crystalline basalts give significant indications for oxygen fugacity below the (QMF) of basaltic magma.Secondary minerals, generated by alteration of basaltic rocks, can be characterized by gas release profiles (GRPs) due to their decomposition in the temperature range below 800 °C. Only in the basalt were there observed indications of alteration processes. Small traces of carbonates (<0.0001 wt%) were detected by the gas release during the decomposition.Processes of degassing at temperatures higher than 800 °C are correlated to volatiles in the melt and to fluid inclusions of the minerals. There are no obvious correlations in the degassing characteristics between H₂O, CO₂ and SO₂. The different maxima of the degassing velocity, especially of CO₂, and SO₂, are indications of the different bonding forces of the site occupancy of the volatiles in the melt and in the glass. A micelle model for bonding sites in the basaltic glass for dissolved volatiles is discussed.     

Crystal field and covalency of octahedral chromium in natural [8](Mg1?xCax) 3[6] (Al0.67Cr0.33)2Si3O12 garnets from upper mantle rocks

In the course of a thorough study of the influences of the second coordination sphere on the crystal field parameters of the 3d ^N -ions and the character of 3d ^N –O bonds in oxygen based minerals, 19 natural Cr³⁺-bearing (Mg,Ca)-garnets from upper mantle rocks were analysed and studied by electronic absorption spectroscopy, EAS. The garnets had compositions with populations of the ^[8] X-sites by 0.881 ± 0.053 (Ca + Mg) and changing Ca-fractions in the range 0.020 ≤ w _Ca[8] ≤ 0.745, while the ^[6] Y-site fraction was constant with x _Cr³⁺ _[6] = 0.335 ± 0.023. The garnets had colours from deeply violet-red for low Ca-contents (up to x _Ca = 0.28), grey with 0.28 ≤ x _Ca ≤ 0.4 and green with 0.4 ≤ x _Ca. The crystal field parameter of octahedral Cr³⁺ 10Dq decreases strongly on increasing Ca-fraction from 17,850 cm⁻¹ at x _Ca[8] = 0.020 to 16,580 cm⁻¹ at x _Ca[8] = 0.745. The data could be fit with two model which do statistically not differ: (1) two linear functions with a discontinuity close to x _Ca[8] ≈ 0.3,