A rapid method for hydraulic profiling in unconsolidated formations

Information on vertical variations in hydraulic conductivity ( K ) can often shed much light on how a contaminant will move in the subsurface. The direct-push injection logger has been developed to rapidly obtain such information in shallow unconsolidated settings. This small-diameter tool consists of a short screen located just behind a drive point. The tool is advanced into the subsurface while water is injected through the screen to keep it clear. Upon reaching a depth at which information about K is desired, advancement ceases and the injection rate and pressure are measured on the land surface. The rate and pressure values are used in a ratio that serves as a proxy for K . A vertical profile of this ratio can be transformed into a K profile through regressions with K estimates determined using other techniques. The viability of the approach was assessed at an extensively studied field site in eastern Germany. The assessment demonstrated that this tool can rapidly identify zones that may serve as conduits for or barriers to contaminant movement.     

Speleothems in a north Cuban cave register sea‐level changes and Pleistocene uplift rates

A flight of marine terraces along the Cuban coast records Quaternary sea‐level highstands and a general slowly uplifting trend during the Pleistocene. U/Th dating of these limestone terraces is difficult because fossil reef corals have been affected by open system conditions. Terrace ages are thus often based on geological and geomorphological observations. In contrast, the minimum age of the terraces can be constrained by dating speleothems from coastal mixing (flank margin) caves formed during past sea‐level highstands and carving the marine limestones. Speleothems in Santa Catalina Cave have ages >360 ka and show various cycles of subaerial–subaqueous corrosion and speleothem growth. This suggests that the cave was carved during the MIS 11 sea‐level highstand or earlier. Some stalagmites grew during MIS 11 through MIS 8 and were submerged twice, once at the end of MIS 11 and then during MIS 9. Phreatic overgrowths (POS) covering the speleothems suggest anchialine conditions in the cave during MIS 5e. Their altitude at 16 m above present sea level indicates a late Pleistocene uplift rate of <0.1 mm/ka, but modelling also shows uplift to have been insignificant over a long timespan during the middle Pleistocene since the cave was carved. Our study shows that some flank margin caves in the region of Matanzas are older than commonly believed (i.e. MIS 11 rather than MIS 5). These caves not only can be preserved but are good markers of interglacial sea‐level highstands, more reliable than marine abrasion surfaces. Copyright © 2018 John Wiley & Sons, Ltd.     

Attenuation mechanisms in fractured fluid-saturated porous rocks: a numerical modelling study

Seismic attenuation mechanisms receive increasing attention for the characterization of fractured formations because of their inherent sensitivity to the hydraulic and elastic properties of the probed media. Attenuation has been successfully inferred from seismic data in the past, but linking these estimates to intrinsic rock physical properties remains challenging. A reason for these difficulties in fluid-saturated fractured porous media is that several mechanisms can cause attenuation and may interfere with each other. These mechanisms notably comprise pressure diffusion phenomena and dynamic effects, such as scattering, as well as Biot's so-called intrinsic attenuation mechanism. Understanding the interplay between these mechanisms is therefore an essential step for estimating fracture properties from seismic measurements. In order to do this, we perform a comparative study involving wave propagation modelling in a transmission set-up based on Biot's low-frequency dynamic equations and numerical upscaling based on Biot's consolidation equations. The former captures all aforementioned attenuation mechanisms and their interference, whereas the latter only accounts for pressure diffusion phenomena. A comparison of the results from both methods therefore allows to distinguish between dynamic and pressure diffusion phenomena and to shed light on their interference. To this end, we consider a range of canonical models with randomly distributed vertical and/or horizontal fractures. We observe that scattering attenuation strongly interferes with pressure diffusion phenomena, since the latter affect the elastic contrasts between fractures and their embedding background. Our results also demonstrate that it is essential to account for amplitude reductions due to transmission losses to allow for an adequate estimation of the intrinsic attenuation of fractured media. The effects of Biot's intrinsic mechanism are rather small for the models considered in this study.     

One‐Pot Synthesis of Xanthate‐Functionalized Cellulose for the Detection of Micromolar Copper(II) and Nickel(II) Ions

A one‐pot synthesis and application of cellulose‐based sensors to efficiently detect various toxic metal ions in aqueous solutions in micromolar quantities is reported. Cellulose microfibers have been functionalized with carbon disulfide in alkaline solution to form cellulose xanthate. The material detects several toxic metal ions such as copper, nickel, or cobalt ions through color change detectable by the naked eye. The optical sensor can be used as an ideal flash test for assessing the quality of drinking water.     

Surface NMR within a geophysical study of an aquifer at Haldensleben (Germany)

The surface nuclear magnetic resonance (SNMR) method has been tested at a site in Haldensleben, northern Germany, to assess the suitability of this new method for groundwater exploration and environmental investigations. More information is obtained by SNMR, particularly with respect to aquifer parameters, than with other geophysical techniques. SNMR measurements were carried out at three borehole locations, together with 2D and 1D direct current geoelectrics, as well as ground-penetrating radar, and well logging (induction log, gamma-ray log and pulsed neutron-gamma log). Permeabilities were calculated from the grain-size distributions of core material determined in the laboratory. It is demonstrated that the SNMR method is able to detect groundwater and the results are in good agreement with other geophysical and hydrogeological data. Using the SNMR method, the water content of the unsaturated and saturated zones (i.e. porosity of an aquifer) can be reliably determined. This information and resistivity data permit in situ determination of other aquifer parameters. Comparison of the SNMR results with borehole data clearly shows that the water content determined by SNMR is the free or mobile water in the pores. The permeabilities estimated from the SNMR decay times are similar to those derived from sieve analysis of core material. Thus, the combination of SNMR with geoelectric methods promises to be a powerful tool for studying aquifer properties.     

The Disk Populations in the [Mg/H]-[Fe/Mg] Plane

The disk populations' metal abundance degeneracy is shown to be considerably relaxed in a two-dimensional presentation of their chemical properties. Assuch, the metallicities of a sample of nearby F- and G-stars aregiven in terms of magnesium abundances along the abscissa andiron-to-magnesium abundance ratios perpendicular to that. Incombination with stellar age estimates and kinematics the disk populationsturn out to be fairly well separable in this abundance plane,which in turn allows to address a number of important issues on theMilky Way's history. This revised version was published online in July 2006 with corrections to the Cover Date.