Protomylonite evolution potentially revealed by the 3D depiction and fractal analysis of chemical data from a feldspar

Tourmalinization associated with peraluminous granitic intrusions in metapelitic host-rocks has been widely recorded in the Iberian Peninsula, given the importance of tourmaline as a tracer of granite magma evolution and potential indicator of Sn-W mineralizations. In the Penamacor-Monsanto granite pluton (Central Eastern Portugal, Central Iberian Zone), tourmaline occurs: (1) as accessory phase in two-mica granitic rocks, muscovite-granites and aplites, (2) in quartz (±mica)-tourmaline rocks (tourmalinites) in several exocontact locations, and (3) as a rare detrital phase in contact zone hornfels and metapelitic host-rocks. Electron microprobe and stable isotope (δ¹⁸O, δD, δ¹¹B) data provide clear distinctions between tourmaline populations from these different settings: (a) schorl–oxyschorl tourmalines from granitic rocks have variable foititic component (^X□ = 17–57 %) and Mg/(Mg + Fe) ratios (0.19–0.50 in two-mica granitic rocks, and 0.05–0.19 in the more differentiated muscovite-granite and aplites); granitic tourmalines have constant δ¹⁸O values (12.1 ± 0.1 ‰), with wider-ranging δD (?78.2 ± 4.7 ‰) and δ¹¹B (?10.7 to ?9.0 ‰) values; (b) vein/breccia oxyschorl [Mg/(Mg + Fe) = 0.31–0.44] results from late, B- and Fe-enriched magma-derived fluids and is characterized by δ¹⁸O = 12.4 ‰, δD = ?29.5 ‰, and δ¹¹B = ?9.3 ‰, while replacement tourmalines have more dravitic compositions [Mg/(Mg + Fe) = 0.26–0.64], close to that of detrital tourmaline in the surrounding metapelitic rocks, and yield relatively constant δ¹⁸O values (13.1–13.3 ‰), though wider-ranging δD (?58.5 to ?36.5 ‰) and δ¹¹B (?10.2 to ?8.8 ‰) values; and (c) detrital tourmaline in contact rocks and regional host metasediments is mainly dravite [Mg/(Mg + Fe) = 0.35–0.78] and oxydravite [Mg/(Mg + Fe) = 0.51–0.58], respectively. Boron contents of the granitic rocks are low (<650 ppm) compared to the minimum B contents normally required for tourmaline saturation in granitic melts, implying loss of B and other volatiles to the surrounding host-rocks during the late-magmatic stages. This process was responsible for tourmalinization at the exocontact of the Penamacor-Monsanto pluton, either as direct tourmaline precipitation in cavities and fractures crossing the pluton margin (vein/breccia tourmalinites), or as replacement of mafic minerals (chlorite or biotite) in the host-rocks (replacement tourmalinites) along the exocontact of the granite. Thermometry based on ¹⁸O equilibrium fractionation between tourmaline and fluid indicates that a late, B-enriched magmatic aqueous fluid (av. δ¹⁸O ~12.1 ‰, at ~600 °C) precipitated the vein/breccia tourmaline (δ¹⁸O ~12.4 ‰) at ~500–550 °C, and later interacted with the cooler surrounding host-rocks to produce tourmaline at lower temperatures (400–450 °C), and an average δ¹⁸O ~13.2 ‰, closer to the values for the host-rock. Although B-metasomatism associated with some granitic plutons in the Iberian Peninsula seems to be relatively confined in space, extending integrated studies such as this to a larger number of granitic plutons may afford us a better understanding of Variscan magmatism and related mineralizations.     

Adaptation financing in a global agreement: is the adaptation levy appropriate?

The climate negotiations recognize that adequate and additional funds are needed to assist adaptation in developing countries. This article analyses whether a future 2% or any higher adaptation levy (AL) can achieve this, whether it causes – as it is a tax on the Clean Development Mechanism (CDM) – a significant excess burden, and how it alters the relation between adaptation financing and mitigation. While former studies have focused on single AL levels, this article determines the transfers from the CDM and the AL for a range of emission reduction targets and AL levels with a partial equilibrium model based on marginal abatement cost estimates for 2020. Revenues from a 2% AL are negligible and remain inadequate for ambitious emission reductions and an AL that maximizes transfers (e.g. US$15 billion for 30% reduction target). Revenues are mostly subtracted from CDM transfers, so little additional funds are raised (e.g. less than $2.4 billion for 30% reduction target). Adaptation financing increases disproportionally with more stringent reduction targets for a rising levy, and the share of Annex I country expenditures devoted to transfers increases slightly. Both effects are only small. The excess burden is larger than 85% of the additional funds.

Policy relevance

Financing adaptation in developing countries has become a cornerstone of a global climate agreement. The mechanism for raising additional funds has not yet been determined. This article assesses the potential of upscaling one option that is already in place under the Kyoto Protocol: the 2% AL on the CDM. It is estimated that even a much higher AL does not generate substantial additional funds, mainly redistributes transfers within non-Annex I countries, does so at social costs in the same order of magnitude as additional funds, and increases the share of Annex I country expenditures devoted to transfers. It is unwise to link mitigation and adaptation as CDM and AL jointly do, since this taxes a beneficial activity. Financial instruments with transfers that decrease with or are independent from climate protection would be preferable.     

Learning and climate change

Abstract

Learning—i.e. the acquisition of new information that leads to changes in our assessment of uncertainty—plays a prominent role in the international climate policy debate. For example, the view that we should postpone actions until we know more continues to be influential. The latest work on learning and climate change includes new theoretical models, better informed simulations of how learning affects the optimal timing of emissions reductions, analyses of how new information could affect the prospects for reaching and maintaining political agreements and for adapting to climate change, and explorations of how learning could lead us astray rather than closer to the truth. Despite the diversity of this new work, a clear consensus on a central point is that the prospect of learning does not support the postponement of emissions reductions today.     

A preliminary methods comparison for measurement of dissolved organic nitrogen in seawater

Routine determination of dissolved organic nitrogen (DON) is performed in numerous laboratories around the world using one of three families of methods: UV oxidation (UV), persulfate oxidation (PO), or high temperature combustion (HTC). Essentially all routine methods measure total dissolved nitrogen (TDN) and calculate DON by subtracting the dissolved inorganic nitrogen (DIN). While there is currently no strong suggestion that any of these methods is inadequate, there are continuing suspicions of slight inaccuracy by UV methods.This is a report of a broad community methods comparison where 29 sets (7 UV, 13 PO, and 9 HTC) of TDN analyses were performed on five samples with varying TDN and DIN concentrations. Analyses were done in a “blind” procedure with results sent to the first author. With editing out one set of extreme outliers (representing 5 out of 145 ampoules analyzed), the community comparability for analyzing the TDN samples was in the 8–28% range (coefficient of variation representing one standard deviation for the five individual samples by 28 analyses). When DIN concentrations were subtracted uniformly (single DIN value for each sample), the comparability was obviously worse (19–46% cv). This comparison represents a larger and more diverse set of analyses, but the overall comparability is only marginally better than that of the Seattle workshop of a decade ago. Grouping methods, little difference was seen other than inconclusive evidence that the UV methods gave TDN values for several of the samples higher than HTC methods. Since there was much scatter for each of the groups of methods and for all analyses when grouped, it is thought that more uniformity in procedures is probably needed. An important unplanned observation is that variability in DIN analyses (used in determining the final analyte in most UV and PO methods) is essentially as large as the variability in the TDN analyses.This exercise should not be viewed as a qualification exercise for the analysts, but should instead be considered a broad preliminary test of the comparison of the families of methods being used in various laboratories around the world. Based on many independent analyses here, none of the routinely used methods appears to be grossly inaccurate, thus, most routine TDN analyses being reported in the literature are apparently accurate. However, it is not reassuring that the ability of the international community to determine DON in deep oceanic waters continues to be poor. It is suggested that as an outgrowth of this paper, analysts using UV and PO methods experiment and look more carefully at the completeness of DIN conversion to the final analyte and also at the accuracy of their analysis of the final analyte. HTC methods appear to be relatively easy and convenient and have potential for routine adoption. Several of the authors of this paper are currently working together on an interlaboratory comparison on HTC methodology.     

The MEMIN research unit: Scaling impact cratering experiments in porous sandstones

Abstract– The MEMIN research unit (Multidisciplinary Experimental and Modeling Impact research Network) is focused on analyzing experimental impact craters and experimental cratering processes in geological materials. MEMIN is interested in understanding how porosity and pore space saturation influence the cratering process. Here, we present results of a series of impact experiments into porous wet and dry sandstone targets. Steel, iron meteorite, and aluminum projectiles ranging in size from 2.5 to 12 mm were accelerated to velocities of 2.5–7.8 km s^?1, yielding craters with diameters between 3.9 and 40 cm. Results show that the target’s porosity reduces crater volumes and cratering efficiency relative to nonporous rocks. Saturation of pore space with water to 50% and 90% increasingly counteracts the effects of porosity, leading to larger but flatter craters. Spallation becomes more dominant in larger‐scale experiments and leads to an increase in cratering efficiency with increasing projectile size for constant impact velocities. The volume of spalled material is estimated using parabolic fits to the crater morphology, yielding approximations of the transient crater volume. For impacts at the same velocity these transient craters show a constant cratering efficiency that is not affected by projectile size.     

Hypervelocity impacts on dry and wet sandstone: Observations of ejecta dynamics and crater growth

Abstract– This study deals with the investigation of highly dynamic processes associated with hypervelocity impacts on porous sandstone. For the impact experiments, two light‐gas accelerators with different calibers were used, capable of accelerating steel projectiles with diameters ranging from 2.5 to 12 mm to several kilometers per second. The projectiles impacted on dry and water‐saturated Seeberger Sandstone targets. The study includes investigations of the influence of pore water on the shape of the ejecta cloud as well as transient crater growth. The results show a significant influence of pore water on ejecta behavior. Steeper ejecta cone angles are observed if the impacts are conducted on wet sandstones. The transient crater grows at a faster rate and reaches a larger diameter if the target is water saturated. In our experiments, target porosity leads to smaller crater sizes compared with nonporous targets. Water within the pore space reduces porosity and counteracts this process. Power law fits were applied to the crater growth curves. The results show an increase in the scaling exponent μ with increasing pore space saturation.     

Impact cratering in sandstone: The MEMIN pilot study on the effect of pore water

Abstract– Planetary surfaces are subjected to meteorite bombardment and crater formation. Rocks forming these surfaces are often porous and contain fluids. To understand the role of both parameters on impact cratering, we conducted laboratory experiments with dry and wet sandstone blocks impacted by centimeter‐sized steel spheres. We utilized a 40 m two‐stage light‐gas gun to achieve impact velocities of up to 5.4 km s^?1. Cratering efficiency, ejection velocities, and spall volume are enhanced if the pore space of the sandstone is filled with water. In addition, the crater morphologies differ substantially from wet to dry targets, i.e., craters in wet targets are larger, but shallower. We report on the effects of pore water on the excavation flow field and the degree of target damage. We suggest that vaporization of water upon pressure release significantly contributes to the impact process.     

Appraisal of World Reference Base for Soil Resources—from a nordic point of view

During the project “Nordic Reference Soils” 13 different soils from Denmark, Finland, Norway and Sweden were selected in order to represent i) soils covering the main areas of the Nordic area, ii) soils from the different climatic regions, and iii) environmental sensitive soils. The 13 Nordic Reference Soils provided an excellent basis for the evaluation of the WRB (World Reference Base for Soil Resources) performance under Nordic conditions. Classification according to the WRB poses considerable problems. These concern podzolized soils, cultivated soils, and the acid sulfate soils. Only three out of the seven podzolized soils are allocated in taxons reflecting that they were podzolized. Four out of the nine cultivated soils were exposed to substantial anthropogenic impact, resulting in man-made Mollic A-horizons, which is not reflected in the classification. The WRB-classification of the soils is compared with the FAO and Soil Taxonomy classification. This highlighted some of the classification problems. This paper will propose changes to the WRB in order to improve the performance of the system for Nordic soils.

Geografisk Tidsskrift, Danish Journal of Geography 100: 15–26     

A porosity-gradient replacement approach for computational simulation of chemical-dissolution front propagation in fluid-saturated porous media including pore-fluid compressibility

In dealing with chemical-dissolution-front propagation problems in fluid-saturated porous media, the chemical dissolution front represented by the porosity of the medium may have a very steep slope (i.e., a very large porosity gradient) at the dissolution front, depending on the mineral dissolution ratio that is defined as the equilibrium concentration of the dissolved minerals in the pore-fluid to the solid molar density of the dissolvable minerals in the solid matrix. When the mineral dissolution ratio approaches zero, the theoretical value of the porosity gradient tends to infinity at the chemical dissolution front. Even for a very small value of the mineral dissolution ratio, which is very common in geochemical systems, the porosity gradient can be large enough to cause the solution hard to converge when the conventional finite element method is used to solve a chemical dissolution problem in a fluid-saturated porous medium where the pore-fluid is compressible. To improve the convergent speed of solution, a porosity-gradient replacement approach, in which the term involving porosity-gradient computation is replaced by a new term consisting of pore-fluid density-gradient and pressure-gradient computation, is first proposed and then incorporated into the finite element method in this study. Through comparing the numerical results obtained from the proposed approach with the theoretical solutions for a benchmark problem, it has been demonstrated that not only can the solution divergence be avoid, but also the accurate simulation results can be obtained when the proposed porosity-gradient replacement approach is used to solve chemical-dissolution-front propagation problems in fluid-saturated porous media including pore-fluid compressibility.