Observations of the evolution of the aerosol, cloud and boundary‐layer characteristics during the 1st ACE‐2 Lagrangian experiment

During the 1st Lagrangian experiment of the North Atlantic Regional Aerosol Characterisation Experiment (ACE‐2), a parcel of air was tagged by releasing a smart, constant level balloon into it from the Research Vessel Vodyanitskiy . The Meteorological Research Flight's C‐130 aircraft then followed this parcel over a period of 30 h characterising the marine boundary layer (MBL), the cloud and the physical and chemical aerosol evolution. The air mass had originated over the northern North Atlantic and thus was clean and had low aerosol concentrations. At the beginning of the experiment the MBL was over 1500 m deep and made up of a surface mixed layer (SML) underlying a layer containing cloud beneath a subsidence inversion. Subsidence in the free troposphere caused the depth of the MBL to almost halve during the experiment and, after 26 h, the MBL became well mixed throughout its whole depth. Salt particle mass in the MBL increased as the surface wind speed increased from 8 m s⁻¹ to 16 m s⁻¹ and the accumulation mode (0.1μm to 3.0 μm) aerosol concentrations quadrupled from 50 cm⁻³ to 200 cm⁻³. However, at the same time the total condensation nuclei (>3 nm) decreased from over 1000 cm⁻³ to 750 cm⁻³. The changes in the accumulation mode aerosol concentrations had a significant effect on the observed cloud microphysics. Observational evidence suggests that the important processes in controlling the Aitken mode concentration which, dominated the total CN concentration, included, scavenging of interstitial aerosol by cloud droplets, enhanced coagulation of Aitken mode aerosol and accumulation mode aerosol due to the increased sea salt aerosol surface area, and dilution of the MBL by free tropospheric air.     

New 1982 — 1990 photometry of λ Andromedae and its 11-year cycle

We present photoelectric photometry of λ And never before published, obtained between February 1982 and December 1990 at 29 different observatories. Then we combine it with all other photometry available to us (previously published, contained in the I.A.U. Commission 27 Archives, and obtained with the Vanderbilt 16-inch automatic telescope but not yet published), to yield a 14.8-year data base. Analysis reveals a long-term cycle in mean brightness, with a full range of 0^m.15 and a period of 11.4 ± 0.4 years. Because most of our new photometry was concentrated in the 1983-84 observing season, we analyze that one well-defined light curve with a two-spot model. Spot A keeps a 0^m.04 amplitude throughout four rotation cycles whereas the amplitude of spot B diminishes from 0^m.09 down almost to 0^m.03. The spot rotation periods were 55^d.9 ± 0^d.6 and 520^d.8 ± 1^d.0, respectively.     

Effects of carbon dioxide on deep-sea harpacticoids revisited

As part of the evaluation of the environmental impact of sequestering carbon dioxide in the deep ocean, we exposed the sediment-dwelling fauna at a station in Monterey Submarine Canyon (36.378°N, 122.676°W, 3262 m) to carbon dioxide-rich seawater and found that most of the harpacticoid copepods were killed. In an expanded, follow-on experiment on the continental rise nearby (36.709°N, 123.523°W, 3607 m), not only did harpacticoids survive exposure to carbon dioxide-rich seawater, but we found no evidence from seven additional metrics that the harpacticoids had been affected. We infer that during the second experiment the harpacticoids were not exposed to a stressful dose. During the second experiment, carbon dioxide-rich seawater appears to have been produced more slowly than in the first, probably because of differences in the near-bottom flow regimes. We conclude that local physical circumstances can substantially influence the results of experiments of this type and will complicate the evaluation of the environmental consequences of deep-ocean carbon dioxide sequestration.     

Preserving the unpreservable: a lost world rediscovered at Christian Malford, UK

The small village of Christian Malford, Wiltshire (UK) is known to palaeontologists the world over because of the chance discovery of an astonishing fossil bonanza in the mid-nineteenth century. Pits in the Jurassic Oxford Clay yielded thousands of specimens of exquisitely preserved ammonites, fish and crustaceans, but became most famous for squid-like cephalopods and belemnites (collectively termed coleoids) with fossilized soft-parts. The precise location of the find has remained obscure, until now, and a new attempt is underway to understand the ancient environment that triggered this unusual preservation.     

Meteorite falls in China and some related human casualty events

Abstract— Statistics of witnessed and recovered meteorite falls found in Chinese historical texts for the period from 700 B.C. to A.D. 1920 are presented. Several notable features can be seen in the binned distribution as a function of time. An apparent decrease in the number of meteorite reports in the 18th century is observed. An excess of observed meteorite falls in the period from 1840 to 1880 seems to correspond to a similar excess in European data. A x² probability test suggests that the association between the two data sets are real. Records of human casualties and structural damage resulting from meteorite falls are also given. A calculation based on the number of casualty events in the Chinese meteorite records suggests that the probability of a meteorite striking a human is far greater than previous estimates. However, it is difficult to verify the accuracy of the reported casualty events.     

The Las Campanas/AAT rich cluster survey – I. Precision and reliability of the photometric catalogue

The Las Campanas Observatory and Anglo-Australian Telescope Rich Cluster Survey (LARCS) is a panoramic imaging and spectroscopic survey of an X-ray luminosity-selected sample of 21 clusters of galaxies at     . Charge-coupled device (CCD) imaging was obtained in B and R of typically 2° wide regions centred on the 21 clusters, and the galaxy sample selected from the imaging is being used for an on-going spectroscopic survey of the clusters with the 2dF spectrograph on the Anglo-Australian Telescope. This paper presents the reduction of the imaging data and the photometric analysis used in the survey. Based on an overlapping area of 12.3 deg² we compare the CCD-based LARCS catalogue with the photographic-based galaxy catalogue used for the input to the 2dF Galaxy Redshift Survey (2dFGRS) from the APM, to the completeness of the GRS/APM catalogue,     . This comparison confirms the reliability of the photometry across our mosaics and between the clusters in our survey. This comparison also provides useful information concerning the properties of the GRS/APM. The stellar contamination in the GRS/APM galaxy catalogue is confirmed as around     per cent, as originally estimated. However, using the superior sensitivity and spatial resolution in the LARCS survey evidence is found for four distinct populations of galaxies that are systematically omitted from the GRS/APM catalogue. The characteristics of the 'missing' galaxy populations are described, reasons for their absence examined and the impact they will have on the conclusions drawn from the 2dF Galaxy Redshift Survey are discussed.     

Secondary alteration of the impactite and mineralization in the basal Tertiary sequence,Yaxcopoil‐1, Chicxulub impact crater,Mexico

Abstract The 65 Ma Chicxulub impact crater formed in the shallow coastal marine shelf of the Yucatán Platform in Mexico. Impacts into water‐rich environments provide heat and geological structures that generate and focus sub‐seafloor convective hydrothermal systems. Core from the Yaxcopoil‐1 (Yax‐1) hole, drilled by the Chicxulub Scientific Drilling Project (CSDP), allowed testing for the presence of an impact‐induced hydrothermal system by: a) characterizing the secondary alteration of the 100 m‐thick impactite sequence; and b) testing for a chemical input into the lower Tertiary sediments that would reflect aquagene hydrothermal plume deposition. Interaction of the Yax‐1 impactites with seawater is evident through redeposition of the suevites (unit 1), secondary alteration mineral assemblages, and the subaqueous depositional environment for the lower Tertiary carbonates immediately overlying the impactites. The least‐altered silicate melt composition intersected in Yax‐1 is that of a calc‐alkaline basaltic andesite with 53.4–56 wt% SiO_{2(volatile‐free)}. The primary mineralogy consists of fine microlites of diopside, plagioclase (mainly Ab 47), ternary feldspar (Ab 37 to 77), and trace apatite, titanite, and zircon. The overprinting alteration mineral assemblage is characterized by Mg‐saponite, K‐montmorillonite, celadonite, K‐feldspar, albite, Fe‐oxides, and late Ca and Mg carbonates. Mg and K metasomatism resulted from seawater interaction with the suevitic rocks producing smectite‐K‐feldspar assemblages in the absence of any mixed layer clay minerals, illite, or chlorite. Rare pyrite, sphalerite, galena, and chalcopyrite occur near the base of the impactites. These secondary alteration minerals formed by low temperature (0–150°C) oxidation and fixation of alkalis due to the interaction of glass‐rich suevite with down‐welling seawater in the outer annular trough intersected at Yax‐1. The alteration represents a cold, Mg‐K‐rich seawater recharge zone, possibly recharging higher temperature hydrothermal activity proposed in the central impact basin. Hydrothermal metal input into the Tertiary ocean is shown by elevated Ni, Ag, Au, Bi, and Te concentrations in marcasite and Cd and Ga in sphalerite in the basal 25 m of the Tertiary carbonates in Yax‐1. The lower Tertiary trace element signature reflects hydrothermal metal remobilization from a mafic source rock and is indicative of hydrothermal venting of evolved seawater into the Tertiary ocean from an impact‐generated hydrothermal convective system.     

ISO SWS Spectroscopy of Proto-Planetary Nebulae

We are obtaining low- (SWS01) and medium-resolution (SWS06) spectra of PPNe to investigate spectral features arising in these transitional objects. Three sources with the 21 μm feature have been confirmed, one new source found, and evidence of some substructure seen. This revised version was published online in August 2006 with corrections to the Cover Date.     

shinyNORRRM: A Cross-Platform Software to Calculate the CIPW Norm

In this paper, a novelty-free software to assess an efficient CIPW Norm (± 0.006 wt.% in differences between input and output data) is presented. The package is available in the official repository for user-contributed R packages (CRAN: Comprehensive R Archive Network). The software is able to handle big data sets and considers minor and trace element compositions. The algorithm can calculate odd minerals in igneous rocks, such as cancrinite and calcite, adjust the Fe⁺³/Fe⁺² ratio in different standard approaches, and recalculate the compositions of the rocks in an anhydrous basis (100 ± 0.003 wt.% volatile-free adjusted). Furthermore, the package calculates several petrological parameters, and the graphical outputs are displayed following IUGS scheme standards. The prime aspect of shinyNORRRM is the symbiosis of native R functions with the R package’s shiny (Web Application Framework for R) to run the norm in a user-friendly interface. shinyNORRRM can be executed in any operating system and requires no previous programming knowledge, thus promising to be the universal computational program in this matter. The output data are printed in the standard comma-separated values (*.csv) format, which is highly compatible with general spreadsheet editors. In this work, the algorithm of our program is validated using already compiled whole-rock geochemical databases.

     

A three-level framework for multi-risk assessment

The effective management of the risks posed by natural and man-made hazards requires all relevant threats and their interactions to be considered. This paper proposes a three-level framework for multi-risk assessment that accounts for possible hazard and risk interactions. The first level is a flow chart that guides the user in deciding whether a multi-hazard and risk approach is required. The second level is a semi-quantitative approach to explore if a more detailed, quantitative assessment is needed. The third level is a detailed quantitative multi-risk analysis based on Bayesian networks. Examples that demonstrate the application of the method are presented.