Comparison of marine gas hydrates in sediments of an active and passive continental margin

Two sites of the Deep Sea Drilling Project in contrasting geologic settings provide a basis for comparison of the geochemical conditions associated with marine gas hydrates in continental margin sediments. Site 533 is located at 3191 m water depth on a spit-like extension of the continental rise on a passive margin in the Atlantic Ocean. Site 568, at 2031 m water depth, is in upper slope sediment of an active accretionary margin in the Pacific Ocean. Both sites are characterized by high rates of sedimentation, and the organic carbon contents of these sediments generally exceed 0.5%. Anomalous seismic reflections that transgress sedimentary structures and parallel the seafloor, suggested the presence of gas hydrates at both sites, and, during coring, small samples of gas hydrate were recovered at subbottom depths of 238m (Site 533) and 404 m (Site 568). The principal gaseous components of the gas hydrates wer methane, ethane, and CO₂. Residual methane in sediments at both sites usually exceeded 10 mll^?1 of wet sediment. Carbon isotopic compositions of methane, CO₂, and ΣCO₂ followed parallel trends with depth, suggesting that methane formed mainly as a result of biological reduction of oxidized carbon. Salinity of pore waters decreased with depth, a likely result of gas hydrate formation. These geochemical characteristics define some of the conditions associated with the occurrence of gas hydrates formed by in situ processes in continental margin sediments.     

Interactions between groundwater and surface water in a virginia coastal plain watershed. 1. Hydrological flowpaths

A field study of surface water and groundwater interactions during baseflow and stormflow conditions was performed at the Reedy Creek watershed in the Virginia Coastal Plain. Three estimates of the average saturated hydraulic conductivity (K_s) of the unconfined aquifer were in reasonable agreement (ranging from 0.0033 to 0.010 cm/s), indicating that baseflow in the creek is entirely from the drainage of shallow groundwater from the relatively thin (1–6 m thick) unconfined aquifer. This relatively permeable surficial aquifer was found to be underlain by dark, olive grey, clay-silt and diatomaceous Miocene deposits of low permeability known as the Calvert Formation, which is believed to function as a confining bed in the area. A chemical hydrograph separation technique was used to resolve the contributions of [old] (pre-event) and [new] (event) water to stormflow. Results from a major rainstorm indicated that old water dominated the stormflow response of the watershed, although the new water contribution approached 40% at the hydrograph peak. Stormflow at Reedy Creek appears to result from saturation overland flow from variable source areas which include the stream channels and a significant part of the riparian wetland area. This response appears to be attributable to the transient dynamics of the shallow groundwater flow system and to the formation of localized groundwater mounds which raise the water-table to the wetland surface.     

Application of the SHETRAN basin‐scale,landslide sediment yield model to the Llobregat basin,Spanish Pyrenees

The first application of the SHETRAN basin‐scale, landslide erosion and sediment yield model is carried out for a major landsliding event in the upper 505 km² of the Llobregat basin, in the eastern Spanish Pyrenees, in November 1982. The model simulates the spatial distribution of shallow landslides and their sediment yield. Acknowledging uncertainty in the model parameter evaluation, the aim of the application was not to reproduce the observed occurrence of landslides as accurately as possible with one simulation, but to bracket the observed pattern with several simulations representing uncertainty in the key input conditions. Bounds on the landslide simulations were thus determined as a function of uncertainty in the vegetation root cohesion (used in the model factor of safety calculations). The resulting upper bound considerably overestimates the observed pattern (17 000 landslides compared with an observation of around 700), but it reproduces several of the principal clusters in the observed pattern. The lower bound contains around 500 landslides. The sediment yield estimates (2670–14 630 t km^?2) are comparable to measurements elsewhere in the Pyrenees for extreme events. The results demonstrate an ability to simulate the basin‐scale landslide response to a rainfall event and the resulting sediment yield. They also highlight the need for further research in setting the uncertainty bounds and in avoiding large overestimates of landslide occurrence arising in part from a current inability to model small‐scale controls for a basin of the given size. Copyright © 2006 John Wiley & Sons, Ltd.     

Fore‐arc evolution in the Tasman Geosyncline: The origin of the southeast Australian continental crust

A new general model describing the extended evolution of fore‐arc terrains is used to analyse the evolution of the southern Tasman Geosyncline and the concomitant growth and kratonisation of the continental crust of southeast Australia during the Palaeozoic. The southern Tasman Geosyncline comprises ten arc terrains (here defined), most of which are east‐facing, and several features formed by crustal extension. Each arc terrain consists of several strato‐tectonic units: a volcanic arc, subduction complex and fore‐arc sequence formed during subduction; and an overlying post‐arc sequence which post‐dates subduction and is composed of flysch, neritic sediments or subaerial volcanics.

When these materials attained a thickness of c. 20 km their internal heat‐balance caused partial melting of the subduction complex and the hydrated oceanic lithosphere trapped beneath it, to yield S‐ and I‐type granitic magma. The magma rose, inducing pervasive deformation of each arc terrain and emplacement of granitoid plutons at high levels in the evolving crust. Transitional basins then developed in many terrains on top of their volcanic arcs or the thinner parts of the buried accretionary prisms. After deformation of the transitional sequences, platform cover accumulated, marking the completion of kratonisation.

Analysis of each arc terrain in terms of the above units leads to a predicted ‘stratigraphy’ for the continental crust of southeast Australia. The crust is complexly layered, with lateral discontinuities reflecting the boundaries of arc terrains which were successively accreted, principally back‐arc to fore‐arc, during crustal development.     

The Port Mouton Shear Zone: intersection of a regional fault with a crystallizing granitoid pluton

The peraluminous tonalite–monzogranite Port Mouton Pluton is a petrological, geochemical, structural, and geochronological anomaly among the many Late Devonian granitoid intrusions of the Meguma Lithotectonic Zone of southern Nova Scotia. The most remarkable structural feature of this pluton is a 4-km-wide zone of strongly foliated (040/subvertical) monzogranites culminating in a narrow (10–30 m), straight, zone of compositionally banded rocks that extends for at least 3 km along strike. The banded monzogranites consist of alternating melanocratic and leucocratic compositions that are complementary to the overall composition of that part of the pluton, suggesting an origin by mineral–melt and mineral–mineral sorting. Biotite and feldspar are strongly foliated in the plane of the compositional bands. These compositional variations and foliations originated by a process of segregation flow during shearing of the main magma with a crystallinity of 55–75%. Subsequent minor brittle fracturing of feldspars, twinning of microcline, development of blocky sub-grains in quartz, and kinking of micas demonstrate overprinting by a high-temperature deformation straddling the monzogranite solidus. Small folds and late sigmoidal dykes indicate dextral movement on the shear zone. This Port Mouton Shear Zone (PMSZ) is approximately co-linear with the only outcrops of Late Devonian mafic intrusions in the area, two of which are syn-plutonic with well-developed mingling textures in the marginal tonalite of the Port Mouton Pluton. Also closely co-linear with the mafic intrusions are a granitoid dyke that extends well beyond the outer contact of the Port Mouton Pluton, a swarm of large aligned angular xenolithic slabs, a zone of thin wispy schlieren banding, a large Be-bearing pegmatite, and a breccia pipe with abundant garnetiferous metapelitic xenoliths. In various ways, the shear zone may control all of these features. The Port Mouton Shear Zone is parallel to many other NE-trending faults and shear zones in the northern Appalachians, probably related to the docking of the Meguma Zone along the Cobequid–Chedabucto Fault system.     

Long base line tilt and strain measurement

Two types of noise afflict strain and tilt measurement. They may be categorized as “active” noise, which is due to atmospheric pressure variations, temperature variations, water-table variations and so forth; and “passive” or signal-generated noise which is a consequence of the interaction of the strain field of interest with inhomogeneities of material properties local to the measurement site.The reason why both types of noise are normally reduced by the use of long base line instruments is explained and a simple, practical long base line tiltmeter is described.     

Aliphatic and aromatic hydrocarbons in benthic invertebrates from two sites in Antarctica

Samples of marine benthic invertebrates collected from two sites in the Antarctic have been analysed for both aliphatic and aromatic hydrocarbons in order to establish baseline concentrations for some classes of hydrocarbons.Samples from Signy Island, a pristine site, contained low concentrations of the hydrocarbons determined, whereas those from King Edward Cove, South Georgia, contained significantly higher concentrations. King Edward Cove has a known history of pollution from whaling operations.Platt & Mackie (1979) have suggested that the hydrocarbons in sediments from King Edward Cove are a result of the world-wide dissemination of the pyrolysis products of fossil fuels. Our work suggests, in contrast, that the hydrocarbons in the benthos are derived from local sources.