Petrology and geochemistry of a silicate clast from the Mount Padbury mesosiderite: Implications for metal‐silicate mixing events of mesosiderite

Abstract— Petrological and bulk geochemical studies were performed on a large silicate clast from the Mount Padbury mesosiderite. The silicate clast is composed mainly of pyroxene and plagioclase with minor amounts of ilmenite, spinel, and other accessory minerals, and it shows subophitic texture. Pyroxenes in the clast are similar to those in type 5 eucrites and could have experienced prolonged thermal metamorphism after rapid crystallization from a near‐surface melt. Ilmenite and spinel vary chemically, indicating growth under disequilibrium conditions. The clast seems to have experienced an episode of rapid reheating and cooling, possibly as a result of metal‐silicate mixing. Abundances of siderophile elements are obviously higher than in eucrites, although the clast is also extremely depleted in highly siderophile elements. The fractionated pattern can be explained by injection of Fe‐FeS melts generated by partial melting of metallic portions during metal‐silicate mixing. The silicate clast had a complex petrogenesis that could have included: 1) rapid crystallization from magma in a lava flow or a shallow intrusion; 2) prolonged thermal metamorphism to equilibrate the mineral compositions of pyroxene and plagioclase after primary crystallization; 3) metal‐silicate mixing probably caused by the impact of solid metal bodies on the surface of the mesosiderite parent body; and 4) partial melting of metal and sulfide portions (and silicate in some cases) caused by the collisional heating, which produced Fe‐FeS melts with highly fractionated siderophile elements that were injected into silicate portions along cracks and fractures.     

A GIS-based study toward forecast of suburban forest change

At a time when the concept of ‘human and environmental symbiosis’ has taken on much significance, protection of suburban forests (i.e. forests adjacent to or near developed areas) is a topic that has drawn much attention. Suburban forests have, since ancient times, been places where people have gathered firewood and cultured trees. As a result, the vegetation of suburban forests is only partially natural and continues to change as the forms of human activity in and around them changes. Accurate forecasts of how suburban forests will change are, therefore, an important element in the debate over how to protect them. In this study, a suburban forest was analyzed with laser radar sensing, multi-spectrum scanning, digital photogrammetry analysis, aerial photograph interpretation, and a field survey. Data gathered using these techniques were compiled on a GIS to forecast future changes in the forest. Aerial photographs taken over the past 50 years were analyzed to illuminate changes in the forest over that period. Specifically, comparisons of precise Digital Elevation Models (DEMs) measured by using digital photogrammetry workstations made it possible to estimate growth in forest height. The possible future conversion of such results to estimates of amounts of carbon dioxide consolidated by forests should be very significant for discussions of global environmental problems. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rotation rate and velocity dispersion of planetary ring particles with size distribution II. Numerical simulation for gravitating particles

We examine rotation rates of gravitating particles in low optical depth rings, on the basis of the evolution equation of particle rotational energy derived by Ohtsuki [Ohtsuki, K., 2006. Rotation rate and velocity dispersion of planetary ring particles with size distribution. I. Formulation and analytic calculation. Icarus 183, 373-383]. We obtain the rates of evolution of particle rotation rate and velocity dispersion, using three-body orbital integration that takes into account distribution of random velocities and rotation rates. The obtained stirring and friction rates are used to calculate the evolution of velocity dispersion and rotation rate for particles in one- and two-size component rings as well as those with a narrow size distribution, and agreement with N-body simulation is confirmed. Then, we perform calculations to examine equilibrium rotation rates and velocity dispersion of gravitating ring particles with a broad size distribution, from 1 cm up to 10 m. We find that small particles spin rapidly with 〈ω²〉^1/2/Ω?¹⁰²-¹⁰³, where ω and Ω are the particle rotation rate and its orbital angular frequency, respectively, while the largest particles spin slowly, with 〈ω²〉^1/2/Ω?1. The vertical scale height of rapidly rotating small particles is much larger than that of slowly rotating large particles. Thus, rotational states of ring particles have vertical heterogeneity, which should be taken into account in modeling thermal infrared emission from Saturn's rings.     

Concentration of polychlorinated biphenyls (PCBs) in beached resin pellets: variability among individual particles and regional differences

Concentrations of polychlorinated biphenyls (PCBs) in beached resin pellets were examined to reveal variability between individual particles and differences among beaches. Fifty-five resin pellets from a beach in Tokyo were individually analyzed for PCBs, and showed concentrations ranging from <28 to 2,300 ng/g. This indicates that concentrations are highly variable between particles. Among several characters, discoloration (e.g., yellowing) had a positive relationship with PCB concentration: discolored pellets contained more PCBs than others on most of the beaches sampled. Given the color-selective ingestion of food by some organisms, this may be ecotoxicologically important. Measurements of samples from 47 beaches in Japan showed regional differences in PCB concentrations in resin pellets consistent with those in mussels. Sporadic high concentrations of PCBs were also found in pellets from remote islands, suggesting that resin pellets could be the dominant route of exposure to the contaminants at remote sites. The similarity of PCB concentrations between resin pellets and mussels suggests a potential use of resin pellets to monitor pollution in seawater.     

Substances of cometary grains estimated from evaporation and radiation pressure mechanisms

The shape and intensity distribution of tails for several large comets are estimated on the basis of grain properties in the solar radiation field. The following results are obtained: (1) The ratio of the maximum radiation pressure force to the gravitaional force acting on dust grains in cometary tails is found to be less than 2.5. This means that grains such as graphite particles in the size range 0.02–0.2 μm do not exist in them, because such particles would allow forces greater than 2.5 (2) Tail substances supplied near the time of perihelion passage for the Sun-grazing comet Ikeya-Seki (1965 VIII) and Comet Seki-Lines (1962 III) were composed of particular grains which had values of radiation pressure ratio less than 1.0. Therefore, it is concluded that the material was composed of silicate grains only, since iron grains had sublimated and there were no graphite particles.     

Combining microsimulation and spatial interaction models for retail location analysis

Although the disaggregation of consumers is crucial in understanding the fragmented markets that are dominant in many developed countries, it is not always straightforward to carry out such disaggregation within conventional retail modelling frameworks due to the limitations of data. In particular, consumer grouping based on sampled data is not assured to link with the other statistics that are vital in estimating sampling biases and missing variables in the sampling survey. To overcome this difficulty, we propose a useful combination of spatial interaction modelling and microsimulation approaches for the reliable estimation of retail interactions based on a sample survey of consumer behaviour being linked with other areal statistics. We demonstrate this approach by building an operational retail interaction model to estimate expenditure flows from households to retail stores in a local city in Japan, Kusatsu City.      

Deformation mechanisms and fluid behavior in a shallow, brittle fault zone during coseismic and interseismic periods: Results from drill core penetrating the Nojima Fault, Japan

Abstract This paper describes the results of petrographical and meso- to microstructural observations of brittle fault rocks in cores obtained by drilling through the Nojima Fault at a drilling depth of 389.52 m. The zonation of deformation and alteration in the central zone of the fault is clearly seen in cores of granite from the hanging wall, in the following order: (i) host rock, which is characterized by some intragranular microcracks and in situ alteration of mafic minerals and feldspars; (ii) weakly deformed and altered rocks, which are characterized by transgranular cracks and the dissolution of mafic minerals, and by the precipitation of zeolites and iron hydroxide materials; (iii) random fabric fault breccia, which is characterized by fragmentation, by anastomosing networks of transgranular cracks, and by the precipitation of zeolites and iron hydroxide materials; and (iv) fault gouge, which is characterized by the precipitation of smectite and localized cataclastic flow. This zonation implies that the fault has been weakened gradually by fluid-related fracturing over time. In the footwall, a gouge layer measuring only 15 mm thick is present just below the surface of the Nojima Fault. These observations are the basis for a model of fluid behavior along the Nojima Fault. The model invokes the percolation of meteoric fluids through cracks in the hanging wall fault zone during interseismic periods, resulting in chemical reactions in the fault gouge layer to form smectite. The low permeability clay-rich gouge layer sealed the footwall. The fault gouge was brecciated during coseismic or postseismic periods, breaking the seal and allowing fluids to readily flow into the footwall, thus causing a slight alteration. Chemical reactions between fluids and the fault breccia and gouge generated new fault gouge, which resealed the footwall, resulting in a low fluid condition in the footwall during interseismic periods.     

Holocene environmental changes of the Hwajinpo Lagoon on the eastern coast of Korea

Lithologic and geochemical data of a core from the Hwajinpo Lagoon, located on the eastern coast of Korea, provided the evolutionary history of the lagoon related to Holocene sea-level changes of the East Sea (Sea of Japan). Grain size analysis, water content analysis, and soft X-ray analysis of core samples were used to reconstruct sedimentary environments, as were total organic carbon, C/N, S and C/S chemical records. Assemblages of mollusc and diatom remains also provided paleoenvironmental information. The reconstruction of paleoenvironments from these multi-proxy data allows the establishment of an evolutionary model of the Hwajinpo Lagoon. The environmental changes of the Hwajinpo Lagoon can be divided into seven different depositional facies: (l) Exposed basement rock; (2) Estuarine; (3) Stagnant brackish lagoon (isolated); (4) Oxic condition lagoon (organic activity); (5) Fresh water lake; (6) Oxic brackish lagoon (recent condition); (7) Prograding river delta. These environmental changes can be related to sea-level change during the Holocene. The trends of sea-level change in the Hwajinpo Lagoon from this study can be compared to those of the Japanese coastal areas located on the other side of the East Sea such as Lakes Shinji and Nakaumi.     

Determination of phase transition pressures of ZnTe under quasihydrostatic conditions

Pressure behavior of ZnTe at room temperature was studied using an X-ray energy dispersive method on a DIA type cubic anvil apparatus (SAM-85) at NSLS-X17B1. By using powdered polyethylene, the sample and NaCl for a pressure scale were held under quasihydrostatic conditions, which were confirmed by X-ray diffraction method. Two high-pressure phase transitions were confirmed using X-ray powder diffraction simultaneously with electrical resistance measurements. The phase transition pressures under quasihydrostatic conditions were determined to be 9.6 GPa, at which the resistance increased, and 12.0 GPa, which was the midpoint of a large resistance decrease. Errors in the pressure determinations were estimated to be less than 0.2 GPa. These pressure values may depend on grain size and anisotropic stress effects on the calibrant. From X-ray observation of ZnTe, the bulk modulus of the zinc blende structure was calculated to beK ₀=51(3) GPa andK ₀ =3.6(0.8), and the first transition at 9.6 GPa was found to have about 9% volume change. It was consistent with an anomaly in the pressure generating curves.