Bacterial contribution to sedimentary organic matter; a comparative study of lipid moieties in bacteria and Recent sediments

A systematic study of the lipid composition of thirteen bacterial species and three Recent sediments (methanogenic sediment, cyanobacterial mat and evaporative gypsum crust) was undertaken in an attempt to recognize bacterial organic matter in sediments. A sequential method, which distinguishes between three different modes of occurrence of lipid moieties (free, OH⁻- and H⁺-labile), was applied. The acid-labile fractions are discussed.The three main groups of bacteria, archaebacteria, gram-positive eubacteria and gram-negative eubacteria, are easily distinguished. Methanogenic and extremely halophilic archaebacteria are characterized by the presence of diphytanyl glyceryl ether and the absence of fatty acids. The gram-positive eubacteria contain primarily iso- and anteiso-branched fatty acids whereas the gram-negative bacteria and sediments are dominated by β- and α-hydroxy fatty acids. A wide variety of H⁺-labile hydroxy fatty acids was observed which included several, as yet unknown, structures.β-Hydroxy fatty acids in this H⁺-labile mode of occurrence are exclusively present in bacteria. Their distribution patterns in sediments are considered “fingerprints” of past and present bacterial populations. The specific differences in β -hydroxy fatty acid compositions observed in the different bacteria and the three sediments investigated, suggest that amide-linked β-hydroxy fatty acid patterns are useful as markers of bacterial populations and therefore of environmental conditions.     

Coastal slope terracing and relative sea-level changes: Deductions based on computer simulations

Although a traditional geological survey of terraced coastal slopes is an essential part of studies aimed to reconstruct relative sea-level changes, the stratigraphic and chronological data so obtained frequently prove inadequate to completely unravel the sometimes very complex history of sea-level fluctuation, especially where erosion has prevailed over deposition and/or deposits are difficult to date. On the basis of our experience we think that much additional information can be gained through geomorphological interpretation of the profiles of those slopes. In order to facilitate such interpretation, a computer simulation model is developed that is able to predict the morphogenic response to a variety of possible relative-sea-level histories. The results can be used to envisage some new interpretation keys for the analysis of real situations and, hopefully, as bases for the conception of general models of coastal slope evolution under the action of a variable sea level. Though preliminary, the results so far obtained permit identification of the geomorphological consequences (in terms of resulting slope profile) of ordered successions of transgressions and regressions of different amplitude, rate, order and style. Moreover they provide interesting insights into the role that different styles of tectonic uplift may play in the phenomenon of multiple terracing of coastal slopes.     

Understanding the inelastic seismic behaviour of asymmetric-plan buildings

Studied in this paper is the inelastic seismic behaviour of asymmetric-plan buildings using the histories of base shear and torque. The first step in understanding this behaviour is to construct the base shear and torque surface (BST) for the building, which represents all combinations of shear and torque that applied statically lead to collapse of the structure. Several factors controlling the shape of this surface, such as strength eccentricity and bidirectional ground motion, are identified. Also, their effects on the building responses are studied considering several structural configurations. The results obtained show that the BST surface, in conjunction with the base-shear and torque histories, provides a useful conceptual framework for understanding the behaviour of asymmetric systems. Furthermore, using these surfaces, relevant aspects of the behaviour and design of such buildings become apparent even before dynamic analysis of the structure.     

Multispectral remote sensing of biomass burning in West Africa

Remote sensing measurements provide a vauable means of determining the extent of burning areas and of estimating the overall distribution of pollutant sources (identified from experimental studies) in time and space. This distribution has to be taken into account in the boundary conditions of chemistry atmospheric models.Recent methods developed for the remote sensing of active fires in tropical or temperated forest zones, have been found to be completely inadequate for fire detection on West African savannas. In order to accurately estimate the active fire distribution in the function of different sorts of West African savannas (Sahelian, Sudanian and Guinean) and forests, a multispectral methodology has been developed based on NOAA/11-AVHRR satellite data, with the purpose of eliminating as much as possible the problems related to large surface heterogeneity, confusion and bias, produced by clouds, smoke, haze, background emissivities, etc.Unlike other methods, the results show that the multispectral method, in spite of its selectivity, provides realistic results, and does not under- or over-estimate the number of fires that can be sensed by the satellite. Consequently, this methodology is more appropriate than the simplest ones for a systematic sensing of this phenomenon.     

The southern cape conductive belt (South Africa): Its composition, origin and tectonic significance

Magnetometer array studies have led to the discovery and mapping of the Southern Cape Conductive Belt (SCCB) crossing the southern tip of Africa from west to southeast coasts. The SCCB lies just south of the Namaqua-Natal Belt of cratonic rocks remobilized about 1000 m.y. B.P. It is shown that it coincides with a zone of weakness which has been exploited by three major geosynclinal accumulations over some 600 m.y. Relationships between the SCCB and the basement geochronology, geology and tectonics are considered in detail. These relationships support the view that the conductive belt was formed by an accumulation of marine sediments and oceanic lithosphere at the top of a Proterozoic subduction which stopped about 1000 to 800 m.y. B.P. Associated with this subduction we propose a Proterozoic range of Andean mountains, whose roots are now exposed in the Namaqua-Natal Belt. Later subduction further south, near the present south coast, is proposed to account for the intrusion, between the south coast and the SCCB, of the Cape Granites in the time interval 600-500 m.y. B.P. There is some evidence for a third, yet more distant, subduction episode off Permian Gondwanaland. After outlining this tectonic history, the paper turns to a closer examination of the hypothesis that the Southern Cape Conductive Belt consists of partly serpentinized basalt accumulated at the top of a Proterozoic subduction. A large static magnetic anomaly, which correlates with the SCCB over most of its length, is well fitted by a model which strongly supports this hypothesis. Bouguer gravity anomalies along western and central profiles likewise support the hypothesis. A discussion follows of the process of formation of the proposed block of serpentinized marine rocks, beginning with serpentinization of the crust near oceanic ridges by reaction of warm, porous, newly-extruded basalt with seawater convecting through it. The serpentinized basalt is stable at crustal temperatures and pressures and so is transported in the seafloor until it reaches a subduction, where it accumulates because of its low density. Examples of such accumulations are cited. Finally, it is shown that any iron in the olivine and pyroxene in the original basalt precipitates, when these silicates are hydrated to serpentine, as magnetite which is the dominant mineral conferring high electrical conductivity and high magnetic susceptibility on serpentinites. In particular the Beattie static magnetic anomaly requires, in our model calculation, a very high susceptibility readily attainable in basalt at 15–20% serpentinization. The authors know of no other rock able to provide this high susceptibility. A similar percentage of serpentinization provides the density required to model the gravity anomalies.     

Soluble and insoluble impurities along the 950 m deep Vostok ice core (Antarctica) — Climatic implications

Simultaneous measurements of soluble and insoluble impurities were made on the 950 m deep Vostok (78°30′S, 106°54′E, 3420 m a.s.l.) ice core, spanning roughly 50000 yr, using various analytical techniques. We observed higher continental (×37) and marine (×5.1) inputs during the last glacial age than during the Holocene stage. A study of microparticle compositions and of volcanic indicators (Zn, H₂SO₄), shows that the high observed crustal input is not due to enhanced volcanism, but is rather of continental eolian origin. For the first time, the ionic balance along a deep ice core is established, mainly used in discussing the evolution of the Cl to Na ratio over central East Antarctica with changing climatic conditions: the presence of relatively high amounts of Na₂SO₄ in the marine aerosol at the Vostok site during the Holocene is demonstrated. Comparison with the Dome C (74°39′S, 124°10′E, 3040 m a.s.l.) results confirms the chronology of the major events: (i) maximum terrestrial input around the last glacial maximum (～18 ka BP); (ii) end of the high continental flux over Antarctica near 13 ka BP; (iii) marine input varying in an opposing manner to isotopic fluctuations with rather high concentrations beginning to decrease when isotopic values increase and reaching Holocene values at the end of the transition between cold and warmer climate conditions. Detailed comparison with results provided by deep ice cores from other sites which are probably more influenced by oceanic air masses seems to indicate that most of the aerosol reaching central East Antarctica travel over large distance probably at rather high altitude through the troposphere. We can consider that central East Antarctica is well representative of the upper part of the troposphere (higher than i.e., 3000 m) and should, therefore, provide valuable data for global and Antarctic paleoclimatological models.     

江苏金坛地质遗迹特征及旅游开发建议

金坛市拥有丰富的地质遗迹资源，包括地层剖面、古生物化石产地与古文化遗址、地质构造形迹、地质地貌景观、水体景观、岩溶洞穴、矿产产地与观赏石景点8大类。对其应遵循原态保护的原则，以茅山风景名胜区为重点，因地制宜地开展有特色的大众地学科普旅游，为地方经济和社会发展作出贡献。     

Embedding reach-scale fluvial dynamics within the CAESAR cellular automaton landscape evolution model

We introduce a new computational model designed to simulate and investigate reach-scale alluvial dynamics within a landscape evolution model. The model is based on the cellular automaton concept, whereby the continued iteration of a series of local process ‘rules’ governs the behaviour of the entire system. The model is a modified version of the CAESAR landscape evolution model, which applies a suite of physically based rules to simulate the entrainment, transport and deposition of sediments. The CAESAR model has been altered to improve the representation of hydraulic and geomorphic processes in an alluvial environment. In-channel and overbank flow, sediment entrainment and deposition, suspended load and bed load transport, lateral erosion and bank failure have all been represented as local cellular automaton rules. Although these rules are relatively simple and straightforward, their combined and repeatedly iterated effect is such that complex, non-linear geomorphological response can be simulated within the model. Examples of such larger-scale, emergent responses include channel incision and aggradation, terrace formation, channel migration and river meandering, formation of meander cutoffs, and transitions between braided and single-thread channel patterns. In the current study, the model is illustrated on a reach of the River Teifi, near Lampeter, Wales, UK.     

Installation of a vertical slurry wall around an Italian quarry lake: complications arising and simulation of the effects on groundwater flow

Slurry walls are non-structural barriers that are constructed underground to impede groundwater flow or manage groundwater control problems. The study area is in the Piemonte plain (Italy), close to the River Po. Quarrying works carried out below the piezometric surface created two big quarry lakes. The local groundwater system is characterized by a lower semi-confined aquifer, which is overlain by a semi-permeable bed of clayey peat (aquitard) and an upper unconfined aquifer. Locally, the peat fades away and the granulometry of this horizon becomes silty sandy. A planned enlargement of the quarry will increase the size and depth of the quarry lakes. So the aquitard bed between the two aquifers will be damaged, creating a mixing rate of groundwater. Such a procedure would not be compatible with the presence of two municipal wells upstream from the quarries. Consequently, the installation of a vertical diaphragm (slurry wall) is recommended to separate the aquifers and to act as a filter for the groundwater flowing from the unconfined to the semi-confined aquifer. To predict the consequences caused by the installation of the vertical diaphragm separating the unconfined aquifer and the semi-confined one, a specifically adjusted finite-difference model was used. The model showed a maximum rising of the water table equal to 12 cm, just upstream of the diaphragm and for a distance of about 100 m, and a maximum lowering of 2 cm just downstream of the diaphragm. However, the slurry wall would not cause any change in the piezometric head in the area where there are municipal wells and, hence, will not have any negative effect on the functionality of the municipal wells. Moreover, the migration of water from the unconfined aquifer through the vertical diaphragm will stimulate a series of attenuation and auto-depuration processes of eventual contaminants. These processes are due to the higher crossing time that the groundwater flow takes to go through the vertical barrier (t _a = 96.5 days, whereas for the horizontal semi-permeable layer t _a = 9.6 days). So, the vertical diaphragm can be a resolutive element, representing a mediation and separation factor between the unconfined and the semi-confined aquifers along the border of the quarrying areas, and a protective barrier for the water quality of the quarry lake and the semi-confined aquifer.