The astrometric signal of microlensing events caused by free floating planets

Astrometric observations of microlensing events can be used to obtain important information about lenses. During these events, the shift of the position of the multiple image centroid with respect to the source star location can be measured. This effect, which is expected to occur on scales from micro-arcseconds to milli-arcseconds, depends on the lens-source-observer system physical parameters. Here, we consider the astrometric and photometric observations by space and ground-based telescopes of microlensing events towards the Galactic bulge caused by free floating planets (FFPs). We show that the efficiency of astrometric signal on photometrically detected microlensing events tends to increase for higher FFP masses in our Galaxy. In addition, we estimate that during five years of the Gaia observations, about a dozen of microlensing events caused by FFPs are expected to be detectable.     

Occurrence of pockmarks on the Ortegal Spur continental margin,Northwestern Iberian Peninsula

A total of 445 pockmarks were observed on the upper continental slope of the northwest corner of the Iberian Peninsula (the Ortegal Spur area) by swath bathymetric and ultrahigh resolution seismic data. The pockmarks are U-, V- and W-shaped and have terraces or indentations in cross-section, and are dish-shaped (circular to oval) in plan view. They occur on the surface of the seabed and buried within the Plio-Quaternary and Neogene sediments. Four types of pockmarks were identified and mapped on the basis of their plan-view and cross-section morphology: regular, irregular, asymmetric and composite. The concentration of pockmarks is attributed to seepage of fluids migrating up-dip from deeper parts of the sedimentary basin. A linear high-density concentration with a NNW to N, NE and ESE trend of pockmarks is observed above inferred basement faults that do not affect the Quaternary succession. These pockmarks are thus caused by seepage of thermogenic gas and/or other pore fluids from deeper Late Cretaceous units, and their distribution may help to improve our understanding of the fluid system and migration regime in this part of the Galicia continental margin.     

Seasonal variability of community structure and breeding activity in marine phytal harpacticoid copepods on Ulva pertusa from Pohang,east coast of Korea

Seasonal changes in community structure and reproductive status of phytal harpacticoid copepods in the shallow sublittoral bottom at two sites (Masan-ri and Guryongpo) in Pohang (Korea) are described monthly over a period of 1 year (October 1996 to September 1997). A total of 36 harpacticoid species was identified and the numerically dominant copepods were made up of the families Porcellidiidae and Tisbidae. Although the number of species did not show a seasonal trend, total harpacticoid density revealed a favorable distribution for the warmer season (spring and summer) at both sites. Multiple linear regression analyses showed that univariate indices such as density, evenness and diversity are closely associated with certain environmental parameters. For example, the dominant species fluctuated seasonally in abundance and their maximum densities were found to be temperature- (+ with Porcellidium ofunatense) and nutrient-dependent (+ with Scutellidium longicauda acheloides, + with Zaus unisetosus, and ? with P. wandoensis). In addition, the dominant species appeared to breed year round and their reproductive indices are significantly correlated with some environmental parameters such as temperature (?), pH (+), and phosphate (+). Three species (S. l. acheloides, P. wandoensis, and P. ofunatense) showed maximum density two or three months after their reproductive activity reached a maximum. Overall, the seasonal changes in a phytal harpacticoid community could be explained by combinations of environmental parameters supporting the complexity and biodiversity for this specific group of species in coastal ecosystems.     

Predictions on the detection of the free-floating planet population with K2 and spitzer microlensing campaigns

The K2’s Campaign 9 (K2C9) by the Kepler satellite for microlensing observations towards the Galactic bulge started on April 7, 2016, and is going to last for about three months. It offers the first chance to measure the masses of members of the large population of the isolated dark low-mass objects further away in our Galaxy, free-floating planets (FFPs). Intentionally, this observational period of K2 will overlap with that of the 2016 Spitzer follow-up microlensing project expected to start in June, 2016. Therefore, for the first time it is going to be possible to observe simultaneously the same microlensing events from a ground-based telescope and two satellites. This will help in removing the two-fold degeneracy of the impact parameter and in estimating the FFP mass, provided that the angular Einstein ring radius Θ_E is measured. In this paper we calculate the probability that a microlensing event is detectable by two or more telescopes and study how it depends on the mass function index of FFPs and the position of the observers on the orbit.     

Experimental investigation of water impact on axisymmetric bodies

The results of an elaborate experimental investigation on bottom slamming of axisymmetric objects are presented. Drop tests have been performed on a hemisphere and two conical shapes with different deadrise angles. The test setup is designed so as to prevent small rotations of the test objects which cause scatter in the measurement data. The pressure distribution and evolution as well as the body motion parameters are measured during impact. By means of a high speed camera the water uprise is visualized and the wetting factor is determined for the cones. The results are compared with a three-dimensional asymptotic theory for axisymmetric rigid bodies with constant entry velocity. The ratio between the registered peak pressures and the asymptotic theory are in accordance with comparable experiments in the literature. The asymptotic theory, however, is found to be quite conservative, since the measured peak pressure levels appear to be approximately 50% to 75% of the theoretical levels.     

Controlling factors on the morphology and spatial distribution of methane-related tubular concretions – Case study of an Early Eocene seep system

Up to 10 m in length and >1 m in diameter tubular, calcite-cemented sandstone concretions are hosted by the faulted Dikilitash unconsolidated sands and sandstones. These structures document shallow subsurface pathways of Early Eocene methane seepage in the Balkan Mountains foreland (NE Bulgaria). Their exceptional exposure allowed a unique study of the factors governing the morphology and spatial distribution of such fossilized fluid conduits. The large dimensions and subvertical, cylindrical shape of the most common tube type primarily reflects the buoyancy-driven, vertical path of an ascending gas-bearing fluid through permeable, mainly unconsolidated sandy host sediments. Tube morphology was also influenced by local stratigraphic anisotropies and might as well document differences in former seepage conditions. Mapping of >800 tubular concretions showed the NNW–NNE elongation and alignment of tube clusters and massive cemented sandstone structures. This suggests that Paleogene fault systems played a major role in directing the movement of fluids. However, within a single tube cluster, tubes are preferentially aligned, over distances up to 50 m along directions at an angle between 10° and 36° with respect to the inferred NNW–NNE, cluster parallel fault traces. In addition, cylindrical tubes of analogue dimensions are aligned over distances >100 m along N15° to N25°-oriented directions. It is hypothesized that this spatial geometry of tubular concretions reflects the complex geometry of deformations structures in fault damage zones along which fluids were preferentially channelled.     

Provenance of deep-water reservoir sandstones from the Jubarte oil field,Campos Basin,Eastern Brazilian Margin

The provenance of the Maastrichtian deep-water reservoir sandstones from the Jubarte oil field (Campos Basin, eastern Brazil), was studied using an integrated approach that included quantitative petrography, conventional heavy mineral analysis, garnet mineral chemistry and zircon geochronology. The reservoirs are predominantly coarse, poorly-sorted sandstones with feldspathic composition derived from uplifted basement terrains. The fourth- and fifth-order depositional sequences analyzed show no major variations in composition or in provenance through time. However, variations in apatite:tourmaline presents potential to be used as a parameter for sandstone correlation within the field. The composition of heavy minerals indicates derivation from high temperature and low-to-medium pressure aluminous metapelitic rocks, from granites and subordinate mafic rocks, derived from the Cabo Frio Tectonic Domain and the Oriental terrain of Ribeira orogen, characterizing a supply route from SW to NE. The low ZTR index, as well as the absence of low-grade stable heavy minerals and of metasedimentary rock fragments, suggest that by the end of Cretaceous all supracrustal, low-grade terrains had already been totally eroded, and that plutonic, infracrustal rocks were exposed, similarly to the present situation.     

Prototype measurements and small-scale model tests of wave overtopping at shallow rubble-mound breakwaters: the Ostia-Rome yacht harbour case

The paper presents the comparison between the results of small-scale model tests and prototype measurements of wave overtopping at a rubble-mound breakwater. The specific structure investigated is the west breakwater of the yacht harbour of Rome at Ostia (Italy) and is characterized by a gentle seaward slope (1/4) and by a long, shallow foreshore. The laboratory tests firstly aimed at carefully reproducing two measured storms in which overtopping occurred and was measured. The tests have been carried out in two independent laboratories, in a wave flume and in a wave basin, hence using a two-dimensional (2-D) and a three-dimensional (3-D) setup. In the 2-D laboratory tests no overtopping occurred during the storm reproductions; in the 3-D case discharges five to ten times smaller than those observed in prototype have been measured. This indicates the existence of model and scale effects. These effects have been discussed on the basis of the results of several parametric tests, which have been carried out in both laboratories, in addition to the storm reproductions, varying wave and water level characteristics. Final comparison of all the performed tests with 86 prototype measurements still suggests the existence of scale and model effects that induce strong underestimation of overtopping discharge at small scale. The scale reproduction of wave breaking on the foreshore, together with the 3-D features of the prototype conditions and the absence of wind stress in the laboratory measurements, have been individuated as the main sources of scale and model effects. The paper also provides a comparison between the data and a largely used formula for wave overtopping discharges in the presence of structures similar to the one at hand. The suitable value of a roughness factor that appears in that formula is investigated and good agreement is found with other recent researches on rubble-mound breakwaters.     

Measuring Tourist’s Water Footprint in a Mountain Destination of Northwest Yunnan, China

Monitoring and minimizing tourist’s water consumption is essential for the sustainable development of mountain destinations in the world. However, available data and a generally accepted protocol on such measurement are still limited. This study uses water footprint accounting to quantify tourist’s water demand in the Liming valley, a World Heritage site and a rapidly growing tourism destination in Northwest Yunnan, China. Both the water for direct and indirect use is taken into account based on the consump...     

鱼塭产斑节对虾(Penaeus monodon)催熟繁殖技术研究

以综合催熟措施和移植精荚手术相结合的技术方法,解决了鱼塭产斑节对虾催熟效应期长,产卵率低,易蜕壳失去精荚等难题。使用 ２７８ 尾雌虾,催熟率达９０％ 以上,在４０ ｄ 内共产卵６０８ 尾次,卵量１８ ５３０ 万粒,孵出无节幼体１１ ９９８ 万尾,平均孵化率 ６４．７％ ,平均每尾雌虾孵出无节幼体 ４３．１ 万尾,育成商品虾苗 １ ０２８．５ 万尾,育苗平均成活率 １３．６％ ,试养成活率５７．１％