Cambrian–early Ordovician volcanism across the South Armorican and Occitan domains of the Variscan Belt in France: Continental break-up and rifting of the northern Gondwana margin

The Cambrian–lower Ordovician volcanic units of the South Armorican and Occitan domains are analysed in a tectonostratigraphic survey of the French Variscan Belt. The South Armorican lavas consist of continental tholeiites in middle Cambrian–Furongian sequences related to continental break-up. A significant volcanic activity occurred in the Tremadocian, dominated by crustal melted rhyolitic lavas and initial rifting tholeiites. The Occitan lavas are distributed into five volcanic phases: (1) basal Cambrian rhyolites, (2) upper lower Cambrian Mg-rich tholeiites close to N-MORBs but crustal contaminated, (3) upper lower–middle Cambrian continental tholeiites, (4) Tremadocian rhyolites, and (5) upper lower Ordovician initial rift tholeiites. A rifting event linked to asthenosphere upwelling took place in the late early Cambrian but did not evolve. It renewed in the Tremadocian with abundant crustal melting due to underplating of mixed asthenospheric and lithospheric magmas. This main tectono-magmatic continental rift is termed the “Tremadocian Tectonic Belt” underlined by a chain of rhyolitic volcanoes from Occitan and South Armorican domains to Central Iberia. It evolved with the setting of syn-rift coarse siliciclastic deposits overlain by post-rift deep water shales in a suite of sedimentary basins that forecasted the South Armorican–Medio-European Ocean as a part of the Palaeotethys Ocean.     

Validation of joint inversion of direct current and electromagnetic measurements

One of the ways to improve the information content of a set of field data is that of combining the interpretation of disparate data sets. Electromagnetic and direct current resistivity methods suffer from inherent equivalence problem. Application of joint inversion for these measurements can overcome the problem of equivalence very well. In the present work, synthetic data from vertical electrical sounding (VES) and horizontal coplanar low-frequency induction sounding (EMHD) are inverted individually and jointly over different types of 1D earth structures. Global optimization with Monte Carlo Multistart algorithm was used in the calculations. The results obtained from the inversions of synthetic data indicate that the joint inversion significantly improves the solution reducing the ambiguity of the models.     

Adaptation of the optimal fingerprint method for climate change detection using a well-conditioned covariance matrix estimate

The “optimal fingerprint” method, usually used for detection and attribution studies, requires to know, or, in practice, to estimate the covariance matrix of the internal climate variability. In this work, a new adaptation of the “optimal fingerprints” method is presented. The main goal is to allow the use of a covariance matrix estimate based on an observation dataset in which the number of years used for covariance estimation is close to the number of observed time series. Our adaptation is based on the use of a regularized estimate of the covariance matrix, that is well-conditioned, and asymptotically more precise, in the sense of the mean square error. This method is shown to be more powerful than the basic “guess pattern fingerprint”, and than the classical use of a pseudo-inverted truncation of the empirical covariance matrix. The construction of the detection test is achieved by using a bootstrap technique particularly well-suited to estimate the internal climate variability in real world observations. In order to validate the efficiency of the detection algorithm with climate data, the methodology presented here is first applied with pseudo-observations derived from transient regional climate change scenarios covering the 1960–2099 period. It is then used to perform a formal detection study of climate change over France, analyzing homogenized observed temperature series from 1900 to 2006. In this case, the estimation of the covariance matrix is only based on a part of the observation dataset. This new approach allows the confirmation and extension of previous results regarding the detection of an anthropogenic climate change signal over the country.     

Impact of coherent eddies on airborne measurements of vertical turbulent fluxes

During the Hydrological-Atmospheric Pilot Experiment (HAPEX)-Sahel, which took place in Niger in the transitional period between the wet and dry seasons, two French aircraft probed the Sahelian boundary layer to measure sensible and latent heat fluxes. The measurements over the Niamey area often revealed organised structures of a few km scale that were associated with both thermals and dry intrusions. We study the impact of these coherent structures using a single day’s aircraft-measured fluxes and a numerical simulation of that day with a mesoscale model. The numerical simulation at high horizontal resolution (250 m) contains structures that evolve from streaks in the early morning to cells by noon. This simulation shows distribution, variance and skewness similar to the observations. In particular, the numerical simulation shows dry intrusions that can penetrate deeply into the atmospheric boundary layer (ABL), and even reach the surface in some cases, which is in accordance with the observed highly negatively skewed water vapour fluctuations. Dry intrusions and thermals organised at a few km scale give skewed flux statistics and can introduce large errors in measured fluxes. We use the numerical simulation to: (i) evaluate the contribution of the organised structures to the total flux, and (ii) estimate the impact of the organised structures on the systematic and random errors resulting from the 1D sampling of the aircraft as opposed to the 2D numerical simulation estimate. We find a significant contribution by the organised structures to the total resolved fluxes. When rolls occur, and for a leg length of about 30 times the ABL depth, the 1D sampled flux is shown to be sometimes 20% lower than the corresponding 2D flux when the 1D sampling direction is the same as the main axis of the rolls, whereas the systematic error is much lower when the direction of the leg is transverse to the rolls. In the case of cells, an underestimate of around 10% can still be observed with the 1D approach independent of direction, due to poor sampling of the energy-containing scales.     

Hydrodynamics of suspended particulate matter in the tidal freshwater zone of a macrotidal estuary (the Seine Estuary, France)

The effects of fortnightly, semidiurnal, and quaterdiurnal lunar tidal cycles on suspended particle concentrations in the tidal freshwater zone of the Seine macrotidal estuary were studied during periods of medium to low freshwater flow. Long-term records of turbidity show semidiurnal and spring-neap erosion-sedimentation cycles. During spring tide, the rise in low tide levels in the upper estuary leads to storage of water in the upper estuary. This increases residence time of water and suspended particulate matter (SPM). During spring tide periods, significant tidal pumping, measured by flux calculations, prevents SPM transit to the middle estuary which is characterized by the turbidity maximum zone. On a long-term basis, this tidal pumping allows marine particles to move upstream for several tens of kilometers into the upper estuary. At the end of the spring tide period, when the concentrations of suspended particulate matter are at their peak values and the low-tide level drops, the transport of suspended particulate matter to the middle estuary reaches its highest point. This period of maximum turbidity is of short duration because a significant amount of the SPM settles during neap tide. The particles, which settle under these conditions, are trapped in the upper estuary and cannot be moved to the zone of maximum turbidity until the next spring tide. From the upper estuary to the zone of maximum turbidity, particulate transport is generated by pulses at the start of the spring-neap tide transition period.     

Uraniferous bitumen nodules in the Talvivaara Ni–Zn–Cu–Co deposit (Finland): influence of metamorphism on uranium mineralization in black shales

In the central part of the Fennoscandian Shield, the Talvivaara Ni–Zn–Cu–Co deposit, hosted by Palaeoproterozoic metamorphosed black schists, contains low uranium concentrations ranging from 10 to 30 ppm. The Talvivaara black schists were deposited 2.0–1.9 Ga ago and underwent subsequent metamorphism during the 1.9–1.79 Ga Svecofennian orogeny. Anhedral uraninite crystals rimmed by bitumen constitute the main host of uranium. U–Pb secondary ion mass spectrometry dating indicates that uraninite crystals were formed between 1,878?±?17 and 1,871?±?43 Ma, during peak metamorphism. Rare earth element patterns and high Th content (average 6.38 wt%) in disseminated uraninite crystals indicate that U was concentrated during high temperature metamorphism (>400 °C). The formation of bitumen rims around uraninite may be explained by two distinct scenarios: (a) a transport of U coincident with the migration of hydrocarbons or (b) post-metamorphic formation of bitumen rims, through radiolytic polymerization of gaseous hydrocarbons at the contact with uraninite.     

Fragmentation Energy in Rock Blasting

The theoretical explosive energy used in blasting is a common issue in many recent research works (Spathis 1999; Sanchidrian 2003). It is currently admitted that the theoretical available energy of the explosives is split into several parts during a blast: seismic, kinetic, backbreaks, heave, heat and fragmentation energies. Concerning this last one, the energy devoted to the breakage and to the creation of blocks within the muckpile can be separated from the microcracking energy which is devoted to developing new and/or extending existing micro cracks within the blocks (Hamdi et al. 2001; López et al. 2002). In order to investigate these two types of energy, a first and important task is to precisely study the main parameters characterising the two constitutive elements of the rock mass (rock matrix and discontinuity system). This should provide useful guidelines for the choice of the blasting parameters (type of explosive, blasting pattern, etc.), in order to finally control the comminution process. Within the frame of the EU LESS FINES research project, devoted to the control of fines production, the methodology was developed in order to: (1) characterize the in situ rock mass, by evaluating the density, anisotropy, interconnectivity and fractal dimension of the discontinuity system and (2) evaluate fragmentation (both micro and macro) energy spent during the blasting operation. The methodology was applied to three production blasts performed in the Klinthagen quarry (Sweden) allowing to estimate the part of the fragmentation energy devoted to the formation of muck pile blocks on one side and to the muckpile blocks microcracking on the other side.     

About stability of libration points in the restricted photogravitational three body problem

Nonlinear stability of the triangular libration point in the photogravitational restricted three body problem was investigated in the whole range of the parameters. Some results obtained earlier are corrected. The method for proper determination of cases when stability cannot be determined by four order terms of the hamiltonian was proposed.     

A conceptual hydrogeological model of ophiolite hard-rock aquifers in Oman based on a multiscale and a multidisciplinary approach

Ophiolites are found all over the world: from the Alps to the Himalayas, in Cuba, Papua-New Guinea, New Caledonia, Newfoundland, etc. They are composed of hard rocks—basalt, dolerite, gabbro and peridotite, which are formed at the mid-oceanic ridges, with specific ridge-related tectonic fracturing and intense hydrothermal alteration. Their geological and thus their hydrogeological properties differ from those of both granite or classical gabbro and classical basaltic lava. A conceptual hydrogeological model of these hard-rock aquifers was developed based on the convergent results of a multidisciplinary approach at several spatial scales, from rock-sample (centimetre) to catchment (kilometre), on well-preserved ophiolite rocks in Oman. In ophiolite rocks, groundwater circulation takes place mostly in the fissured near-surface horizon (50 m thick), and, to a lesser degree, in the tectonic fractures. Hydrograph analysis (Water Resour Res 34:233–240, 1977), interpretation of numerous pumping tests using both classical Theis and dual porosity models [Water Resour Res 32:2733–2745, 1996; Comput Geosci J (in press)], and mercury porosity and hydraulic conductivity lab-measurements support the aquifer parameter estimates. The hydraulic conductivity K of the fissured horizon is estimated at 10^–5 to 10^–6 m/s for gabbro and dolerite, and 10^–7 m/s for peridotite. The storage coefficient S of the peridotite aquifer is estimated at 10^–3 and appears to be controlled mainly by microcracks (20 to 100 m wide). Tectonic fractures in the ophiolite have similar hydrodynamic properties regardless of lithology (10^–1<T<10^–4 m²/s and 10^–1<S<10^–3) though the probability of obtaining productive wells is two to three times greater in gabbro and dolerite than in peridotite. Some of the tectonic fractures produce small hydrothermal, hyperalkaline springs in the peridotite. The water budget and hydrochemistry of the Oman ophiolite are characterized and support the conceptual hydrogeological model. Despite low annual rainfall, a relatively low hydraulic conductivity and a significant storage coefficient explain why most of the streams in peridotite are perennial.

---

Résumé Les ophiolites se trouvent partout dans le monde : des Alpes à lHymalaya, à Cuba, Papouasie Nouvelle-Guinée, Nouvelle Calédonie, etc. Les ophiolites sont composées de roches dures basaltiques, de dolérites, gabbros et péridotites, qui sont formées aux rides mi-océaniques, avec, en relation avec les rides, une fracturation tectonique et une altération hydrothermale intense. Leurs propriétés géologiques et hydrogéologiques diffèrent de celles des granites ou des gabbros classiques ou des laves basaltiques classiques. Un modèle hydrogéologique conceptuel des aquifères de hard-rock a été développé sur les résultats convergents dune approche multidisciplinaire à différentes échelles spatiales, de léchantillon de roche de quelques centimètres à la taille du bassin versant en kilomètres, des ophiolites bien conservées dOman. Dans les roches ophiolitiques, la circulation des eaux souterraines est surtout localisée dans les fissures dun horizon de surface de plus dune cinquantaine de mètres et à un degré moindre dans les fractures tectoniques. Lanalyse des hydrographes (Water Resour Res 34:233–240, 1977), linterprétation des nombreux essais de pompage utilisant des modèles classiques de Theis et des modèles à double porosité (Water Resour Res 32:2733–2745, 1996; Comput Geosci J (Soumis), la porosité au mercure et la conductivité hydraulique calculée en laboratoire supportent lestimation des paramètres de laquifère. La conductivité hydraulique K de lhorizon fissuré est estimée entre 10^–5 et 10^–6 m/s pour les gabbros et les dolérites, et 10^–7 m/s pour les péridotites. Le coefficient demmagasinement S de laquifère de péridotite est estimé à 10^–3 et semble être contrôlé par les micro-fractures (20 à 100 m de largeur). Les fractures tectoniques dans les ophiolites possèdent des propriétés hydrodynamiques en regard de la lithologie (10-1<T<10-4 m²/s et 10-1/S/10-3) bien que la probabilité dobtenir des puits productifs est trois plus grand dans le grabbro et la dolérite que la péridétite. Quelques unes des fractures tectoniques produisent de petites sources hydrothermales hyperalcalines dans la péridotite. Le bilan hydrologique et hydrochimique de lophiolite dOman caractérise le modèle hydrogéologique conceptuel. Malgré des faibles précipitations annuelles, une relativement basse conductivité hydraulique et un coefficient demmagasinement significatif expliquent pourquoi la plus part des cours deau sur les péridotites ne sont jamais taris.

---

Resumen Las rocas ofiolitas se encuentran en muchas partes del mundo desde los Alpes a los Himilaya, Newfoundland, Nueva Caledonia etc. Son rocas duras compuestas de basalto, dolerita, gabro y peridotita que son formadas por los cordones medio-oceánicos y por fracturación relacionada con los cordones tectónicos específicos y alteración hidrotermal intensa. La geología y los propiedades hidrogeológicas varian entre las de granito y gabro clásico y lava de basalto clásico. Se desarrolló un modelo conceptual de los acuíferos de las rocas duras Basado en los resultados convergentes de un enfoce multidisciplinario a varias escalas a partir de muestras de roca (centímetro) a cuenca kilómetro) enfocado en las rocas ofilíticas bien preservados en Oman. En las rocas ofiolíticas la circulación de agua ocurre principalmente en el horizonte de fisuras cercanas a la superficie (>50 m de espesor) y en un grado menos importante en fracturas tectónicas. Los estimados de los parámetros de estos acuíferos se basan en análisis de hidrógrafos (Water Resour Res 34:233–240, 1977), en la interpretación de pruebas de bombeo usando los modelos clásicos de Theis y de porosidad doble (Hamm y Bidaux 1996; Lods y Gouze, [en prensa]), y porosidad de mecurio y conductividad hidraúlica medida en el laboratorio. La conductividad hidraúlica K del horizonte fisurado se estima en 10E-5 a 10E-6 m-s para gabro y dolerita y 10E-7 para peridotita. El coeficiente de abastecimiento S del acuífero peridotita se estima en 10–3 y parece ser controlado principalmente por microfracturas (20 to 100 m de ancho). Las fracturas tectónicas en la ofiolita tienen propiedades hidrodinámicas similares independientes de la litología (10–1<T<10–4 m²/s and 10–1<S<10–3) pero la probabilidad de obtener pozos productivos es dos o tres veces mayor en gabro que en dolerita o peridotita. Algunas de las fracturas tectónicas producen pequeñas descargas de agua hidrotermal hiperalcalina en la peridotita. El presupuesto e hidroquímica de las ofilitas de Omán se caracteriza y apoya en el modelo conceptual hidrogeológico. La baja lluvia anual, una conductividad hidraúlica relativamente baja y un coeficiente de abastecimiento importante explican porqué la mejoría de los drenajes en peridotita es peremne.

     

Occurrence and Distribution of the Eggs and Larvae of Anchovy, <Emphasis Type="Italic">Engraulis japonicus</Emphasis>, in Jeju Strait,Korea, with Descriptions of Environmental Characteristics

The occurrence and distribution of eggs and larvae of anchovy, Engraulis japonicus, in Jeju Strait, Korea from May to November 2002 were investigated, and the relationships between the abundances of anchovy eggs and larvae and the oceanographic conditions, including meteorological data, were analyzed. During the sampling periods, the anchovy eggs occurred from May to October and about 95% of total egg abundance occurred in only two months from July to August, suggesting that the main spawning season of anchovies is confirmed in summer from July and August in Jeju Strait. The spawning area of anchovies gradually moved to the southern part of the survey area with time. The predominant anchovy larvae collected in this study were mostly smaller than 16.0 mm TL. Correlation analysis and multiple regression analysis showed that the anchovy egg abundance in the study area depended strongly on the wind conditions, especially less than 10 m/s, and increasing water temperature. Salinity variations also had significant effects on the abundance of anchovy larvae.