The OSIRIS‐REx target asteroid (101955) Bennu: Constraints on its physical,geological, and dynamical nature from astronomical observations

We review the results of an extensive campaign to determine the physical, geological, and dynamical properties of asteroid (101955) Bennu. This investigation provides information on the orbit, shape, mass, rotation state, radar response, photometric, spectroscopic, thermal, regolith, and environmental properties of Bennu. We combine these data with cosmochemical and dynamical models to develop a hypothetical timeline for Bennu's formation and evolution. We infer that Bennu is an ancient object that has witnessed over 4.5 Gyr of solar system history. Its chemistry and mineralogy were established within the first 10 Myr of the solar system. It likely originated as a discrete asteroid in the inner Main Belt approximately 0.7–2 Gyr ago as a fragment from the catastrophic disruption of a large (approximately 100‐km), carbonaceous asteroid. It was delivered to near‐Earth space via a combination of Yarkovsky‐induced drift and interaction with giant‐planet resonances. During its journey, YORP processes and planetary close encounters modified Bennu's spin state, potentially reshaping and resurfacing the asteroid. We also review work on Bennu's future dynamical evolution and constrain its ultimate fate. It is one of the most Potentially Hazardous Asteroids with an approximately 1‐in‐2700 chance of impacting the Earth in the late 22nd century. It will most likely end its dynamical life by falling into the Sun. The highest probability for a planetary impact is with Venus, followed by the Earth. There is a chance that Bennu will be ejected from the inner solar system after a close encounter with Jupiter. OSIRIS‐REx will return samples from the surface of this intriguing asteroid in September 2023.     

Patterns of Nd and Sr isotopic ratios produced by magmatic and post-magmatic processes in the Shiant Isles Main Sill, Scotland

The Shiant Isles Main Sill of the British Tertiary Igneous Province is a classic example of a differentiated, alkaline basic sill. Four separate intrusions, each emplaced internally in rapid succession, form a 165-m-thick sill hosted by Lower Jurassic sedimentary rocks. Extensive Nd and Sr isotopic studies were conducted on samples from a vertical section through the sill where the relationships of samples to one another are well defined. The results illuminate patterns of modification of isotopic ratios and clarify the petrogenesis (magma sources, crustal contamination), magmatic processes (bulk mixing, interstitial liquid mixing), and post-magmatic alteration (hydrothermal effects on Sr and Nd). Overall, the whole-rock initial ⁸⁷Sr/⁸⁶Sr ratios range from ∼0.7037 to 0.7061 while initial ¹⁴³Nd/¹⁴⁴Nd ratios vary from ∼0.51243 to 0.51286 (ɛ_Nd∼−0.7 to +5.7) – values that contrast markedly with those of the country rock. Acid leaching (HCl) of the whole-rock samples that removes analcime indicates that most of the scatter in the ⁸⁷Sr/⁸⁶Sr is caused by the ubiquitous sub-solidus, aqueous alteration during which more-radiogenic Sr was introduced into the sill, especially along the margins, and also reveals magmatic isotopic ratios. In contrast, Nd was immobile during fluid interaction so that the sill ¹⁴³Nd/¹⁴⁴Nd ratios were not affected, even <1 m from the country-rock contact. Using leached rock values, ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios are inversely correlated from magmatic processes. Magmas with two distinct isotopic compositions were involved: a more primitive one with ¹⁴³Nd/¹⁴⁴Nd ∼0.51285 and ⁸⁷Sr/⁸⁶Sr ∼0.7035 that produced the first two intrusions and a more evolved one (with 0.51252 and 0.7048) that produced the third intrusion. Mixing of the two magmas was very limited, restricted to near contacts between units, and apparently occurred by interstitial melt migration. The more evolved crinanitic magma was probably produced from a batch of the more primitive picritic melt by a small degree of crustal contamination and crystal fractionation during a short crustal residence prior to ascent and emplacement. Received: 20 December 1999 / Accepted: 5 May 2000     

Earthquake swarms preceding the 2000 eruption of Miyakejima volcano, Japan

The first sign of magma accumulating beneath Miyakejima, an island volcano in the northern Izu islands, Japan, came at around 18:00 on 26 June 2000, when a swarm of earthquakes was detected by a volcano seismic network on the island. Earthquakes occurred initially beneath the southwest flank near the summit and gradually migrated west of the island, where a submarine eruption occurred the next morning. Earthquakes then migrated further to the northwest between Miyakejima and Kozushima, another volcanic island and developed to the most intense earthquake swarm ever observed in and around Japanese archipelago. To better image how the initial magma intrusion occurred, we relocated hypocenters by using a station-correction method and a double-difference method. The relocated epicenters are generally concentrated near the upper bound of dyke intrusions inferred from geodetic studies throughout the initial stages of the 2000 eruption at Miyakejima from 26 to 27 June 2000. As for seismic activity westward off Miyakejima in the morning on 27 June, hypocenters from both a nationwide seismic network that were relocated by the double-difference method, and those from the volcano seismic network relocated by the station-correction method, formed a very shallow cluster that ascended slowly with time as it propagated northwestward from Miyakejima. This suggests that the dykes have both a radial and upward component of movement.Editorial responsibility: S. Nakada, T. Druitt     

Conversion of waste to electricity in a microbial fuel cell using newly identified bacteria: <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis>

The present study deals with the capability of pulp industry wastewater to produce bioelectricity with isolation and screening of native electrogenic bacteria from wastewater. In the screening process, three bacterial isolates were obtained; they were studied on the basis of morphology and biochemical characteristics. The maximum bioelectricity producing bacteria was identified by sequencing method and was identified as Pseudomonas fluorescens, and it is a novel bacteria reported in bioelectricity production from pulp industry wastewater. Further, the work focuses on optimization of various parameters, i.e., inoculum size, pH, temperature, mediators and its concentration. It was observed that with pulp industry wastewater, inoculum size of 1.5% gave the maximum voltage and current of 1.244 ± 0.003^d V and 5.946 ± 0.005^d mA, respectively. A pH of 7.0 gave maximum voltage and current of 0.956 ± 0.009^e V and 2.692 ± 0.016^e mA. At 35 °C temperature, maximum production of voltage and current of 1.045 ± 0.003^d V and 2.167 ± 0.037^d mA were recorded. Among the various mediators, humic acid was found to be most effective as it produced a voltage of 1.054 ± 0.004^f V and current of 1.070 ± 0.004^d mA. Maximum voltage of 1.291 ± 0.021^f V and current of 1.896 ± 0.006^f mA were recorded with 200 μM of humic acid. Physicochemical analysis of the effluent was conducted before and after experimental run, and the values suggested that the microbial fuel cell technology is an efficient method for biological treatment of wastewater.     

High magnitude global seismicity and lateral velocity gradients

Summary A new significant correlation has been sought between high magnitude global seismicity and lateral surface wave velocity gradients. Rayleigh wave velocity divisioning of Eurasia, Africa, Pacific Ocean, Atlantic Ocean and Indian Ocean into regions of similar group velocity dispersion character of 30 sec period bySanto andSato [1]³) has been mainly used for calculating the gradients. It is quite striking to note that all earthquakes of magnitude 8.6 and above during 1897–1956 have occurred in regions having gradients of the order of 1.5·10^–3 sec^–1.Finally, some potential areas for high magnitude earthquake occurrences are predicted and the possible velocity gradients in regions, where division pattern is not yet investigated like South America and Australia, are also estimated.N.G.R.I. Contribution No. 70-170.     

Magma-hydrothermal system interaction inferred from volcanic gas measurements obtained during 2003–2008 at Meakandake volcano,Hokkaido, Japan

Phreatic eruptions occurred at the Meakandake volcano in 1988, 1996, 1998, 2006, and 2008. We conducted geochemical surveillance that included measurements of temperature, SO₂ emission rates, and volcanic gas composition from 2003 to 2008 at the Nakamachineshiri (NM), Northwest (NW), and Akanuma (AK) fumarolic areas, and the 96–1 vent, where historical eruptions had occurred. The elemental compositions of the gases discharged from the different areas are similar compared with the large variations observed in volcanic gases discharged from subduction zones. All the gases showed high apparent equilibrium temperatures, suggesting that all these gases originated from a common magmatic gas. The gases discharged from each area also exhibited different characteristics, which are probably the results of differences in the conditions of meteoric water mixing, quenching of chemical reactions, and vapor-liquid separation. The highest apparent equilibrium temperatures (about 500°C) were observed in the case of NW fumarolic gases, despite the low outlet temperature of about 100°C at these fumaroles. Since the NW fumaroles were formed as a result of the 2006 phreatic eruption, the high-temperature gas supply to the NW fumarole suggests that the phreatic eruption was caused by the ascent of high-temperature magmatic gases. The temperatures, compositions, and emission rates of the NM and 96–1 gases did not show any appreciable change after the 2006 eruption, indicating that each fumarolic system had a separate magmatic-hydrothermal system. The temperatures, compositions, and emission rates of the NM fumarolic gases were apparently constant, and these fumaroles are inferred to be formed by the evaporation of a hydrothermal system with a constant temperature of about 300°C. The 96–1 gas compositions showed large changes during continuous temperature decrease from 390° to 190°C occurred from 2003 to 2008, but the sulfur gas emission rates were almost constant at about four tons/day. At the 96–1 vent, the SO₂/H₂S ratio decreased, while the H₂/H₂O ratio remained almost constant; this was probably caused by the rock-buffer controlled chemical reaction during the temperature decrease.     

A reanalysis of the relationship between strong westerlies and precipitation in the Great Plains and Midwest regions of North America

A conceptual model relating expanded or strengthened mid-latitude summer westerlies with summer precipitation patterns has been used to explain past drought events in the Great Plains and Midwest of North America, including drought between 1200 and 1400 AD. However, this relationship was originally described using 20 years of instrumental data from the mid 20{th} century, and has not been verified with modern datasets. We reinvestigated the relationship between July westerlies and precipitation in the United States using instrumental records of the last 55 years. We also investigated whether changes in summer zonal flow patterns associated with precipitation anomalies represent a shift in the latitude of peak westerly winds or an increase in wind speed, or a combination of both.Finally, we briefly compare the pattern of precipitation anomalies to paleoclimatic records of drought between 1200 and 1400 AD. Results confirm that strong westerlies are associated with a band of decreased precipitation extending from the northern Rockies into the Midwest. Changes in summer westerlies associated with these patterns are characterized by a strengthening of mean westerly winds, with only a slight southward shift of peak winds over the Atlantic. Changes in the strength of the westerlies over both the Pacific and Atlantic appear to be important to precipitation deficits in the Midwest. Proxy-climate records from 1200 to 1400 AD indicate widespread drought in the Great Plains and Midwest, consistent with the hypothesis of stronger westerlies at this time. However, drought conditions also extended to other regions of North America, indicating a more detailed understanding of the potential causes and synoptic climatology is needed.     

Suppressing non‐Gaussian noises with scaled receiver wavefield for reverse‐time migration: comparison of different approaches

Numerical implementation of the gradient of the cost function in a gradient‐based full‐ waveform inversion (FWI) is essentially a migration operator used in wave equation migration. In FWI, minimizing different data residual norms results in different weighting strategies of data residuals at receiver locations prior to back‐propagation into the medium. In this paper, we propose different scaling methods to the receiver wavefield and compare their performances. Using time‐domain reverse‐time migration (RTM), we show that compared to conventional algorithms, this type of scaling is able to significantly suppress non‐Gaussian noise, i.e., outliers. Our tests also show that scaling by its absolute norm produces better results than other approaches.     

Phosphorus removal in low alkalinity secondary effluent using alum

The alkalinity plays an important role in phosphorus removal using coagulant. The dosage of coagulant in the low alkalinity wastewater is limited due to rapid pH changes. In the present study, a series of jar test was conducted using low alkalinity wastewater (50 mg/L) to evaluate the optimum pH, dosage and performance parameters (slow mixing and settling time) for the common coagulant alum. From the experiment, it was found that the dosage of coagulant and removal of phosphorus depend upon the pH of the wastewater after adding coagulant. The final optimum pH for efficient P removal was found to be within the range of 5.7–5.9. This range acts as an indicator and it is the maximum tolerable pH range for phosphorus removal for low alkalinity wastewater. The optimum time for slow mix and settling was found to be 20 min. The optimum mole ratio of alum to remove one mole of phosphorous was found to be 2.3. The alum coagulation at pH 7 produced effluent with the total residual phosphorus and reactive phosphorus content of 0.3 and 0.9 mg/L, respectively.