Estimates of abundance of the short-baseline (1-3 meters) slopes for different Venusian terrains using terrestrial analogues

The interplanetary mission, Venera-D, which is currently being planned, includes a lander. For a successful landing, it is necessary to estimate the frequency distributions of slopes of the Venusian surface at baselines that are comparable with the horizontal dimensions of lander (1–3 m). The available data on the topographic variations on Venus preclude estimates of the frequency of the short-wavelength slopes. In our study, we applied high-resolution digital terrain models (DTM) for specific areas in Iceland to estimate the slopes on Venus. The Iceland DTMs have 0.5 m spatial and 0.1 m vertical resolution. From the set of these DTMs, we have selected those that morphologically resemble typical landscapes on Venus such as tessera, shield, regional, lobate, and smooth plains. The mode of the frequency distribution of slopes on the model tessera terrain is within a 30°–40° range and a fraction of the surface has slopes <7°, which is considered as the upper safety limit. This is the primary interest. The frequency distribution of slopes on the model tessera is not changed significantly as the baseline is changed from 1 m to 3 m. The terrestrial surfaces that model shield and regional plains on Venus have a prominent slope distribution mode between 8°–20° and the fraction of the surfaces with slopes <7° is less than 30% on both 1 m and 3 m baselines. A narrow, left-shifted histogram characterizes the model smooth plains surfaces. The fraction of surfaces with slopes <7° is about 65–75% for the shorter baseline (1 m). At the longer baseline, the fraction of the shallow-sloped surfaces is increased and fraction of the steep slopes is decreased significantly. The fraction of surfaces with slopes <7° for the 3-m baseline is about 75–88% for the terrains that model both lobate and smooth plains.     

Petrogenesis of voluminous mid-Tertiary ignimbrites of the Sierra Madre Occidental,Chihuahua, Mexico

The mid-Tertiary ignimbrites of the Sierra Madre Occidental of western Mexico constitute the largest continuous rhyolitic province in the world. The rhyolites appear to represent part of a continental magmatic arc that was emplaced when an eastward-dipping subduction zone was located beneath western Mexico.In the Batopilas region of the northern Sierra Madre Occidental the mid-Tertiary Upper Volcanic sequence is composed predominantly of rhyolitic ignimbrites, but volumetrically minor lava flows as mafic as basaltic andesite are also present. The basaltic andesite to rhyolite series is calc-alkalic and contains 1% K₂O at 60% SiO₂. Trace element abundances of a typical ignimbrite with 73% SiO₂ are Sr 225 ppm, Rb 130 ppm, Y 32 ppm, Th 12 ppm, Zr 200 ppm, and Nb 15 ppm. The entire series plots as coherent and continuous trends on variation diagrams involving major and trace elements, and the trends are distinct from those of geographicallyassociated rocks of other suites. We interpret these and other geochemical variations to indicate that the rocks are comagmatic. Mineral chemistry, Sr isotopic data, and REE modelling support this interpretation.Least squares calculations show that the major element variations are consistent with formation of the basaltic andesite to rhyolite series by crystal fractionation of observed phenocryst phases in approximate modal proportions. In addition, calculations modelling the behavior of Sr with the incompatible trace element Th favor a fractional crystallization origin over a crustal anatexis origin for the rock series. The fractionating minerals included plagioclase (> 50%), and lesser amounts of Fe-Ti oxides, pyroxenes, and/or hornblende. The voluminous ignimbrites represent no more than 20% of the original mass of a mantle-derived mafic parental magma.     

Carbon,oxygen and sulphur isotope variations in concretions from the Upper Lias of N.E. England

Carbon, oxygen and sulphur isotope data for transects across two pyrite-bearmg carbonate concretions, and their host sediments, from the Upper Lias of N.E. England show symmetrical zonation. δ¹³C_PDB values of the calcite cement (?12.9 to ?15.4%.) indicate that most of it originated from organic matter by bacterial reduction of sulphate, augmented with marine and, to a lesser extent, fermentation derived carbonate. Organic carbon (δ¹³C_PDB = ?26.1 to ?37.0%.). reflects the admixture of allochtho-nous terrestrial organic matter with marine material and the selective preservation of isotopically light organic material through microbiological degradation.Two phases of pyrite are present in each concretion. The earlier framboidal pyrite formed throughout the sediment prior to concretionary growth and has δ³⁴S_CD values of ?22 to ?26%. indicating formation by open system sulphate reduction. The later euhedral phase is more abundant and reaches values of ? 2.5 to ? 5.5%. at concretion margins. This phase of sulphate reduction provided the carbonate source for concretionary growth and occurred in a partially closed system. The δ¹³C and δ³⁴S data are consistent with mineralogical and chemical evidence which suggest that both concretions formed close to the sediment surface. The δ₁₈O values of the calcite in one concretion (δ¹⁸O_PDB = 2.3 to ?4.8%.) indicate precipitation in pore waters whose temperature and isotopic composition was close to that of overlying seawater. The other concretion is isotopically much lighter (δ¹⁸O_PDB?8.9 to ?9.9%.) and large δ¹⁸O differences between concretions in closely-spaced horizons imply that local factors control the isotopic composition of pore waters.     

A 50-year record of NO<Subscript>x</Subscript> and SO<Subscript>2</Subscript> sources in precipitation in the Northern Rocky Mountains,USA

Ice-core samples from Upper Fremont Glacier (UFG), Wyoming, were used as proxy records for the chemical composition of atmospheric deposition. Results of analysis of the ice-core samples for stable isotopes of nitrogen (δ¹⁵N, ) and sulfur (δ³⁴S, ), as well as and deposition rates from the late-1940s thru the early-1990s, were used to enhance and extend existing National Atmospheric Deposition Program/National Trends Network (NADP/NTN) data in western Wyoming. The most enriched δ³⁴S value in the UFG ice-core samples coincided with snow deposited during the 1980 eruption of Mt. St. Helens, Washington. The remaining δ³⁴S values were similar to the isotopic composition of coal from southern Wyoming. The δ¹⁵N values in ice-core samples representing a similar period of snow deposition were negative, ranging from -5.9 to -3.2 ‰ and all fall within the δ¹⁵N values expected from vehicle emissions. Ice-core nitrate and sulfate deposition data reflect the sharply increasing U.S. emissions data from 1950 to the mid-1970s.     

Two magmatic series with island arc affinities within the vourinos ophiolite

Within the Vourinos ophiolite evidence of two magmatic series has been preserved in cognate cumulates and in effusive and hypabyssal rocks, which constitute the earlier Krapa sequence and the younger Asprokambo sequence. The Asprokambo dyke basic magmas which are poor in incompatible elements and relatively Ni and Cr rich, bear some resemblance to very low Ti basalts (transitional to boninites) found in subduction related arcs or interarc basins. Krapa series magmas from sills, massive and pillow lavas are best equated with low-K tholeiites of island arc suites. Compositions of Al- and Ti- poor Cpx in lavas from both series are comparable to those in island arc basalts, the Asprokambo Cpx being richer in Ca and Cr than those from Krapa.The large volume of cumulates from the Krapa sequence displays the following crystallization order: Ol±Sp, Cpx, Pl±Opx, Mt. Periodic influx of fresh magma batches into the magma chamber occurred mainly during the formation of the lower cumulates (wehrlite, Ol-clinopyroxenite and melagabbro). The upper cumulates, gabbronorite and leucogabbronorite with minor Mt-bearing gabbronorite, crystallized in the upper levels of a magma chamber which became progressively smaller with time. In the Asprokambo sequence, Ol+Sp, Opx, Cpx, PI and Amph are the successively crystallizing phases. The ortho to heteradcumulates consist of websterite, Pl-websterite, gabbronorite, amphibole bearing leuconorite, diorite and granophyre. In cumulates, especially in the lower Krapa sequence, significant subsolidus reaction was probably induced by the persistence of high geothermal gradients linked to continuous magmatism. Petrological features indicate that the evolution of the Krapa series is more compatible with an intermediate fractional/equilibrium crystallization history in an initially open system, whereas nearly perfect fractional crystallization in closed system may have occurred in the small Asprokambo magma chambers. Chemical variations in the lavas of both series can be explained in terms of crystallization of the observed cumulates. Significantly, the Asprokambo intrusives have igneous Mg-hornblende and vanadium bearing, chromian, aluminous titaniferous magnetite, crystallization of which is responsible for the calcalkaline evolutionary trend of these rocks. Major and trace element modelling necessitates a two stage model for the petrogenesis of the Vourinos parental melts, involving high-degree remelting of previously depleted mantle sources favoured by the influx of subduction derived hydrous fluids. The primary magmas parental to the Krapa and Asprokambo series could have been derived respectively by 20 and 30% equilibrium partial fusion of variably depleted lherzolitic sources, leaving residua having a harzburgitic to dunitic composition.     

Reduction of inorganic compounds in autoclaves by using suspended cellulose

Autoclaves are closed vessels in which liquids can be heated above their ‘normal' boiling points. As a consequence the pressure will rise. This equipment has permitted a variety of processes like the syntheses of organics and the leaching of metal ores. Pressure technologies can be used for accelerating reactions, for specific syntheses or they offer an environmental or economical alternative for existing processes. Wet pressure oxidation of sewage sludge, an organic waste product, has become a proven technology. If less oxygen is added than stoichiometrically required for a complete oxidation, cellulose will break down by a different reaction mechanism, releasing electrons. Under these circumstances reduction of inorganic compounds is possible.