Hydrogeological characterization of Gold Valley: an investigation of precipitation recharge in an intermountain basin in the Death Valley region, California, USA

Gold Valley is typical of intermountain basins in Death Valley National Park (DVNP), California (USA). Using water-balance calculations, a GIS-based analytical model has been developed to estimate precipitational infiltration rates from catchment-scale topographic data (elevation and slope). The calculations indicate that groundwater recharge mainly takes place at high elevations (>1,100?m) during winter (average 1.78?mm/yr). A resistivity survey suggests that groundwater accumulates in upstream compartmentalized reservoirs and that the groundwater flows through basin fill and fractured bedrock. This explains the relationship between the upstream precipitational infiltration in Gold Valley and the downstream spring flow in Willow Creek. To verify the ability of local recharge to support high-flux springs in DVNP, a GIS-based model was also applied to the Furnace Creek catchment. The results produced insufficient total volume of precipitational infiltration to support flow from the main high-flux springs in DVNP under current climatic conditions. This study introduces a GIS-based infiltration model that can be integrated into the Death Valley regional groundwater flow model to estimate precipitational infiltration recharge. In addition, the GIS-based model can efficiently estimate local precipitational infiltration in similar intermountain basins in arid regions provided that the validity of the model is verified.     

Depositional processes on oceanic island shelves – Evidence from storm‐generated Neogene deposits from the mid‐North Atlantic

Oceanic islands – such as the Azores in the mid‐North Atlantic – are periodically exposed to large storms that often remobilize and transport marine sediments along coastlines, and into deeper environments. Such disruptive events create deposits – denominated tempestites – whose characteristics reflect the highly dynamic environment in which they were formed. Tempestites from oceanic islands, however, are seldom described in the literature and little is known about storm‐related sediment dynamics affecting oceanic island shelves. Therefore, the geological record of tempestite deposits at oceanic islands can provide invaluable information on the processes of sediment remobilization, transport and deposition taking place on insular shelves during and after major storms. In Santa Maria Island (Azores), a sequence of Neogene tempestite deposits was incorporated in the island edifice by the ongoing volcanic activity (thus preserved) and later exposed through uplift and erosion. Because it was overlain by a contemporary coastal lava delta, the water depth at the time of deposition could be inferred, constituting an excellent case‐study to gain insight on the still enigmatic processes of insular shelf deposition. Sedimentological, palaeontological, petrographic and palaeo‐water depth information allowed the reconstruction of the depositional environment of these sediments. The sequence typifies the characteristics of a tempestite (or successive tempestites) formed at ca 50 m depth, in a steep, energetic open insular shelf, and with evidence for massive sediment remobilization from the nearshore to the middle or outer shelf. The authors claim that cross‐shelf transport induced by storm events is the main process of sediment deposition acting on steep and narrow shelves subjected to high‐energetic environments, such as the insular shelves of open‐sea volcanic islands.     

Gravimetric and magnetic fabric study of the Sintra Igneous complex: laccolith-plug emplacement in the Western Iberian passive margin

International Journal of Earth Sciences - The geometry and emplacement of the ~ 96 km2, Late Cretaceous Sintra Igneous complex (SIC, ca. 80 Ma) into the West Iberian passive...     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

Comment on “An extended STIRPAT model-based methodology for evaluating the driving forces affecting carbon emissions in existing public building sector: evidence from China in 2000–2015” by Ma et al. (2017)

Natural Hazards - This contribution highlights that the paper presented by Ma et al. (Nat Hazards 89(2):741–756, 2017) presents VIF lower than 1 which does not coincide with the natural...     

Fe,Mn, P and S Speciation in Sediments from the Capivara Hydroelectric Dam Lake (Brazil) as an Indicator of Anthropogenic Influences

The conservation of large water resources is essential for the preservation of human life. The quantification and, more importantly, the speciation of chemical substances that indicate the presence of anthropogenic contamination in water resources are of great importance. This paper presents the results of analysis for the determination of organic, inorganic and total phosphorus, pseudo‐sulfur, and iron and manganese, in five fractions, in water sediments collected from the Capivara Hydroelectric Power Plant, Brazil. A study on the seasonal variation of these parameters was conducted, with data having been collected in the winter and in the summer, at two sites along the dam, 5 km apart, close to the city of Primeiro de Maio. Phosphorous was found in sediments and adjacent soil in the organic form (OP), and was used as an indicator of anthropogenic influence on the reservoir banks. Speciation of potentially toxic Mn showed that it is present in the exchangeable fraction of the 0–5 cm depth layer (sediment/water interface), making its transfer to the water column possible. Results from this study showed that domestic and industrial effluent treatment measures are needed for the preservation of the quality of aquatic environments.     

Midnight reversal of ionospheric plasma bubble eastward velocity to westward velocity during geomagnetically quiettime: Climatology and its model validation

In an effort to better understand the dynamics of westward velocities of the nocturnal F-region plasma, the climatology of the westward traveling plasma bubbles – WTB – occurring during quiettime is studied here. The climatology of the WTB is analyzed here based on airglow images obtained during 14 quiet days between 2001 and 2006 at the Brazilian station São João do Cariri (Geographic 7.45°S, 36.5°W, dip ～20°S). The frequency of occurrence of the WTB maximizes in the descending phase of the solar cycle. The WTB velocities ranged between ～20 and 40 ms^?1. The frequency of occurrence had a peak value of only 3.65% at 2345 LT. The maximum occurrence of the WTB was in July–September. No WTB have been observed from November until April in all years 2001–2006. We show for the first time theoretically that the WTB dominant forcing mechanisms during geomagnetically quiet days are westward thermospheric winds.     

High-temperature emplacement of the Cerro Galán and Toconquis Group ignimbrites (Puna plateau,NW Argentina) determined by TRM analyses

Estimates of pyroclastic flow emplacement temperatures in the Cerro Galán ignimbrite and Toconquis Group ignimbrites were determined using thermal remanent magnetization of lithic clasts embedded within the deposits. These ignimbrites belong to the Cerro Galán volcanic system, one of the largest calderas in the world, in the Puna plateau, NW Argentina. Temperature estimates for the 2.08-Ma Cerro Galán ignimbrite are retrieved from 40 sites in 14 localities (176 measured clasts), distributed at different distances from the caldera and different stratigraphic heights. Additionally, temperature estimates were obtained from 27 sample sites (125 measured clasts) from seven ignimbrite units forming the older Toconquis Group (5.60–4.51 Ma), mainly outcropping along a type section at Rio Las Pitas, Vega Real Grande. The paleomagnetic data obtained by progressive thermal demagnetization show that the clasts of the Cerro Galán ignimbrite have one single magnetic component, oriented close to the expected geomagnetic field at the time of emplacement. Results show therefore that most of the clasts acquired a new magnetization oriented parallel to the magnetic field at the moment of the ignimbrite deposition, suggesting that the clasts were heated up to or above the highest blocking temperature (T _b) of the magnetic minerals (T _b = 580°C for magnetite; T _b = 600–630°C for hematite). We obtained similar emplacement temperature estimations for six out of the seven volcanic units belonging to the Toconquis Group, with the exception of one unit (Lower Merihuaca), where we found two distinct magnetic components. The estimation of emplacement temperatures in this latter case is constrained at 580–610°C, which are lower than the other ignimbrites. These estimations are also in agreement with the lowest pre-eruptive magma temperatures calculated for the same unit (i.e., 790°C; hornblende–plagioclase thermometer; Folkes et al. 2011b). We conclude that the Cerro Galán ignimbrite and Toconquis Group ignimbrites were emplaced at temperatures equal to or higher than 620°C, except for Lower Merihuaca unit emplaced at lower temperatures. The homogeneity of high temperatures from proximal to distal facies in the Cerro Galán ignimbrite provides constraints for the emplacement model, marked by a relatively low eruption column, low levels of turbulence, air entrainment, surface–water interaction, and a high level of topographic confinement, all ensuring minimal heat loss.     

Downscaling of South America present climate driven by 4-member HadCM3 runs

The objective of this work is to evaluate climate simulations over South America using the regional Eta Model driven by four members of an ensemble of the UK Met Office Hadley Centre HadCM3 global model. The Eta Model has been modified with the purpose of performing long-term decadal integrations and has shown to reproduce “present climate”—the period 1961–1990—reasonably well when forced by HadCM3. The global model lateral conditions with a resolution of 2.5° latitude?×?3.75° longitude were provided at a frequency of 6?h. Each member of the global model ensemble has a different climate sensitivity, and the four members were selected to span the range of uncertainty encompassed by the ensemble. The Eta Model nested in the HadCM3 global model was configured with 40-km horizontal resolution and 38 layers in the vertical. No large-scale internal nudging was applied. Results are shown for austral summer and winter at present climate defined as 1961–90. The upper and low-level circulation patterns produced by the Eta-CPTEC/HadCM3 experiment set-up show good agreement with reanalysis data and the mean precipitation and temperature with CRU observation data. The spread in the downscaled mean precipitation and temperature is small when compared against model errors. On the other hand, the benefits in using an ensemble is clear in the improved representation of the seasonal cycle by the ensemble mean over any one realization. El Ni?o and La Ni?a years were identified in the HadCM3 member runs based on the NOAA Climate Prediction Center criterion of sea surface temperature anomalies in the Ni?o 3.4 area. The frequency of the El Ni?o and La Ni?a events in the studied period is underestimated by HadCM3. The precipitation and temperature anomalies typical of these events are reproduced by most of the Eta-CPTEC/HadCM3 ensemble, although small displacements of the positions of the anomalies occur. This experiment configuration is the first step on the implementation of Eta-CPTEC/HadCM3 upcoming experiments on climate change studies that are discussed in a companion paper.     

Climate change and the incidence of a forest pest in Mediterranean ecosystems: can the North Atlantic Oscillation be used as a predictor?

Many forest pest species strongly depend on temperature in their population dynamics, so that rising temperatures worldwide as a consequence of climatic change are leading to increased frequencies and intensities of insect-pest outbreaks. In the Mediterranean area, the climatic conditions are strongly linked to the effects of the North Atlantic Oscillation (NAO). The aim of this work is to analyze the dynamics of the pine processionary moth (Thaumetopoea pityocampa), a severe pest of Pinus species in the Circunmediterranean, throughout a region of southern Spain, in relation to NAO indices. We related the percentage of forest plots with high defoliation by pine processionary moth each year with NAO values for the present and the three previous winters, using generalized linear models with a binomial error distribution. The time series is 16-year long, and we performed analyses for the whole database and for the five main pine species separately. We found a consistent relationship between the response variable and the NAO index. The relationship is stronger with pine species living at medium-high altitudes, such as Aleppo (P. halepensis), black (P. nigra), and Scots (Pinus sylvestris) pine, which show the higher defoliation intensities up to 3?years after a negative NAO phase. The results highlight, for the first time, the usefulness of using global drivers in order to understand the dynamics of pest outbreaks at a regional scale, and they open the window to the development of NAO-based predictive models as an early-warning signal of severe pest outbreaks.