Characterization of fresh and weathered petroleum for potential impacts to soil fertility

In many petroleum-producing regions, there are not adequate controls to prevent pipeline breaks and spills, and thus soil is frequently contaminated with petroleum hydrocarbons. Different petroleum oil compounds may produce negative impacts on soil fertility. In this study, four fresh crudes, a weathered petroleum, and oils from bioremediated and burned sites were investigated (specific gravities 0.83–1.27). Fourier transform infrared spectroscopy revealed three predominant polar functional groups to be more plentiful in the heavier crudes. The relative abundance of these groups was used to calculate an index that was directly correlated with specific gravity (R ² = 0.9960) and the percent of asphaltene plus (polars + resins) fractions in the oil (R ² = 0.9643). This index correlated exponentially to the water repellency caused by petroleum in an alluvial soil (R ² = 0.9928). Furthermore, extra-heavy oil at a concentration of 10,000 ppm, the maximum allowable oil concentration in the soil that is within regulatory norms in many US states and other countries, and with a specific gravity >1.002, showed severe water repellency. This study presents an alternative for determining soil remediation criteria based on the API gravity of the oil rather than the C-range of the hydrocarbon mixtures, simplifying analytical methods and systematically studying the interaction between the kinds of petroleum mixtures and potential impacts to soil fertility.     

Catastrophic debris flows near Machu Picchu village (Aguas Calientes), Peru

Slope movements together with intensive river erosion and the following accumulation are the leading processes in the landscape evolution in the area of Machu Picchu village (former Aguas Calientes), which is located close to the Machu Picchu Sanctuary. Debris flows affect not only the bottoms of valleys or canyons, but also debris fans at the termini of the drainage basins, which are heavily inhabited at some places. The most recent event in the Machu Picchu village occurred in April 2004, but several others were documented in a broader area in the last 50 years. The field inspections at Machu Picchu (May and September 2004; June and September 2005) together with oral testimony revealed the nature and behavior of the debris flow. Machu Picchu village can be assessed as a zone with high landslide risk in relation to its urban development. Despite that, the village recorded a rapid growth (threefold population increase) without urban control within the past two decades. Precipitation, which is the main triggering factor of the debris flows, and natural hazard management of the Machu Picchu village are discussed in this paper.     

Événements panafricains dans l'Adrar Souttouf (Sahara marocain)

The Adrar Souttouf belt (Western Sahara) lies in the northern part of the Mauritanide belt and was considered as a part of the Hercynian Mauritanian-Appalachian belt. Recently the presence of a Panafrican protolith (595 Ma) was evidenced by the age of inherited zircons from an eclogitic unit and led to consider complex Panafrican events included in the Hercynian belt, as in the central and southern Mauritanide belt. Our new field survey completed by ten KAr dating (whole rocks and separate minerals) confirmed that multiphased Panafrican formations outcrop within the center of the Adrar Souttouf massif. Diverse events ranged from ca. 1000 to 500 Ma, some of them being indicative of an oceanic type environment and metamorphism. The 1000 Ma metamorphic event is recorded for the first time in the West African craton. A large Hercynian remobilisation is also evidenced. To cite this article: M. Villeneuve et al., C. R. Geoscience 338 (2006).     

http://www.sciencedirect.com/science/article/pii/S1674987111000855

During the last decades, several integrated studies of Tethyan Jurassic/Cretaceous boundary sections from different countries were published with the objective to indicate problems for the selection of biological, chemical or physical markers suitable for identification of the Jurassic/Cretaceous boundary e the only system boundary within the Phanerozoic still not fixed by GSSP. Drawing the boundary between the Jurassic and Cretaceous systems is a matter of global scale discussions. The problem of proposing possible J/K boundary stratotypes results from lack of a global index fossils, global sea level drop, paleogeographic changes causing development of isolated facies areas, as well as from the effect of Late Cimmerian Orogeny. This contribution summarizes and comments data on J/K boundary interval obtained from several important Tethyan sections and shows still existing problems and discrepancies in its determination.     

Diagenetic paths in the margin of a Triassic Basin: NW zone of the Iberian Chain, Spain

Buntsandstein deposits generated in a slowly subsiding basin on the western margin of the Iberian Chain are represented by a stratigraphic succession of fluvial deposits less than 100 m thick (conglomerates, sandstones, and shales). Diagenetic processes in sandstones can be grouped as eodiagenetic, mesodiagenetic, and telodiagenetic. Eodiagenesis can be associated with Muschelkalk, Keuper, and probably early Jurassic times. Mesodiagenesis is probably related to Jurassic times. Diagenetic chemical reactions suggest a maximum burial less than 1.5 km and low temperatures (<120°C). Patterns of porosity reduction by compaction and cementation suggest four diagenetic stages: (1) Loss of primary porosity by early mechanical compaction; (2) early cementation (K-feldspar and dolomite); (3) dissolution of cements; and (4) framework collapse by re-compaction. These stages are manifested by the presence of two types of sandstone. Type I sandstones present high intergranular volume (mean, 30%). Type II sandstones are characterized by high compactional porosity loss and exhibit low values of intergranular volume (mean, 16.9%). Type II sandstones are associated with the dissolution of cement and later re-compaction of type I sandstones. An intermediate telodiagenetic phase is deduced and related to the sharp unconformity between Lower Cretaceous sediments and the underlying sediments. This suggests that a mechanically unstable framework collapsed during the Cretaceous, generating type II sandstones. The analyzed diagenetic paths have a wide applicability on similar marginal areas of rift basins.     

Preliminary Quantitative Assessment of Earthquake Casualties and Damages

Prognostic estimations of the expected number of killed or injured people and about the approximate cost associated with the damages caused by earthquakes are made following a suitable methodology of wide-ranging application. For the preliminary assessment of human life losses due to the occurrence of a relatively strong earthquake we use a quantitative model consisting of a correlation between the number of casualties and the earthquake magnitude as a function of population density. The macroseismic intensity field is determined in accordance with an updated anelastic attenuation law, and the number of casualties within areas of different intensity is computed using an application developed in a geographic information system (GIS) environment, taking advantage of the possibilities of such a system for the treatment of space-distributed data. The casualty rate, defined as the number of killed people divided by the number of inhabitants of the affected region, is also computed and we show its variation for some urban concentrations with different population density. For a rough preliminary evaluation of the direct economic cost derived from the damages, equally through a GIS-based tool, we take into account the local social wealth as a function of the gross domestic product of the country. This last step is performed on the basis of the relationship of the macroseismic intensity to the earthquake economic loss in percentage of the wealth. Such an approach to the human casualty and damage levels is carried out for sites near important cities located in a seismically active zone of Spain, thus contributing to an easier taking of decisions in emergency preparedness planning, contemporary earthquake engineering and seismic risk prevention.     

Lateritic nickel deposits of Brazil

Many nickel deposits are known in Brazil, accounting for about 350 · 10⁶ tons of ore with an average of 1.5% Ni. All are of the lateritic type. These deposits are scattered throughout the country, being rarer in the Northeastern Region and in the South, below 25 °S latitude. They are mainly associated with mafic-ultramafic massifs of large dimensions and ultramafic alkaline complexes, and occur in climatic regions of contrasting seasons. The weathering profile developed over the fresh rock consists, from bottom to top, of the following horizons: altered rock, coarse saprolite, argillaceous saprolite, ferruginous saprolite and lateritic overburden. The thickness of each horizon varies from one deposit to another, the whole profile generally exceeding 20 m. The saprolitic horizons with inherited minerals (serpentine, chlorite) or neoformed minerals (smectites) constitute the silicated nickel ore and are thicker were climatic conditions are drier; the ferruginous upper horizons made up of iron oxide-hydroxides are more developed in more humid regions. In Brazil, the silicated ore generally prevails over the oxidized ore. The main Ni-bearing minerals are serpentine, smectite, garnierite and goethite. The lateritic nickel deposits of Brazil may be correlated with two erosion surfaces, corresponding to the Sul Americano (Lower Tertiary) and Velhas (Upper Tertiary) levelling cycles. The degree of dismantling of the higher and more ancient surface and the consequent development of the Velhas Surface control the position of the nickel accumulation in the landscape. Thus, the deposits may be found either in the lowlands or in the highlands, where they are always covered by a silcrete layer. The alteration profiles in the Brazilian lateritic nickel deposits are broadly similar to those described elsewhere in the world. However, they present two characteristic features: the silicated ore prevails over the oxidized ore, and a silicified layer covers the profies developed on the highlands.