The limits of validity of the Frequency Ratio Method: The particular case of γ Doradus stars

This work provides a general vision of the limits of validity of the Frequency Ratio Method applied to the g‐mode pulsators in asymptotic regime, the γ Doradus stars. In particular, the work is mainly focused on the role of rotation which is found one of the most important source of uncertainty of the method. The particular case of the moderately rotating γ Doradus star HD48501 is discussed. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Hydrostratigraphic framework and hydrogeological behaviour of the Mancha Oriental System (SE Spain)

The Mancha Oriental System (MOS) has a surface area of 7,260 km², making it one of the largest carbonate aquifer systems in Spain. The system sustains about 1,000 km² of irrigated crops and supplies groundwater to 275,000 inhabitants. The economic transformation brought about by the development of extensive irrigated cropland has led to a water-balance disequilibrium of about 75 million m³/year. This input–output deficit has negative consequences in the quantity and quality of the available resources, in the river–aquifer relationship, and in the associated ecosystems as well. To understand the hydrogeological behaviour of the system, it is necessary to design a conceptual model. Further, the conceptualisation of a groundwater flow system is a requirement of the European Water Framework Directive for the characterisation of groundwater bodies. The robustness of the conceptual model depends heavily on the user capability of representing the real system. In this work, a multidisciplinary approach has been used to represent the three-dimensional geological framework and the groundwater flow conceptualisation of the MOS. Data management and three-dimensional visualisation have been carried out by means of geographical information system (GIS) tools and software for contouring and three-dimensional surface mapping.     

Controls on sediment evacuation from glacially modified and unmodified catchments in the eastern Sierra Nevada,California

The degree of glacial modification in small catchments along the eastern Sierra Nevada, California, controls the timing and pattern of sediment flux to the adjacent fans. There is a close relationship between the depth of fan‐head incision and the pattern and degree of Late Pleistocene catchment erosion by valley glaciers; catchments with significant glacial activity are associated with deeply incised fan heads, whereas fans emerging from glacially unmodified catchments are unincised. We suggest that the depth of fan‐head incision is controlled by the potential for sediment storage during relatively dry ice‐free periods, which in turn is related to the downstream length of the glacially modified valley and creation of accommodation through valley floor slope lowering and glacial valley overdeepening and widening. Significant storage in glacially modified basins during ice‐free periods leads to sediment supply‐limited conditions at the fan head and causes deep incision. In contrast, a lack of sediment trapping allows quasi‐continuous sediment supply to the fan and prevents incision of the fan head. Sediment evacuation rates should thus show large variations in glacially modified basins, with major peaks during glacial and lows during interglacial or ice‐free periods, respectively. In contrast, sediment removal from glacially unmodified catchments in this type of setting should be free of this effect, and will be dominated instead by short‐term variations, modulated for example by changes in vegetation cover or storm frequency. This distinction may help improve our understanding of long‐term sediment yields as a measure of erosional efficiency. Copyright © 2008 John Wiley & Sons, Ltd.     

Soil property variation mapping through data mining of soil category maps

Spatial information on soil properties is an important input to hydrological models. In current hydrological modelling practices, soil property information is often derived from soil category maps by the linking method in which a representative soil property value is linked to each soil polygon. Limited by the area‐class nature of soil category maps, the derived soil property variation is discontinuous and less detailed than high resolution digital terrain or remote sensing data. This research proposed dmSoil, a data‐mining‐based approach to derive continuous and spatially detailed soil property information from soil category maps. First, the soil–environment relationships are extracted through data mining of a soil map. The similarity of the soil at each location to different soil types in the soil map is then estimated using the mined relationships. Prediction of soil property values at each location is made by combining the similarities of the soil at that location to different soil types and the representative soil property values of these soil types. The new approach was applied in the Raffelson Watershed and Pleasant Valley in the Driftless Area of Wisconsin, United States to map soil A horizon texture (in both areas) and depth to soil C horizon (in Pleasant Valley). The property maps from the dmSoil approach capture the spatial gradation and details of soil properties better than those from the linking method. The new approach also shows consistent accuracy improvement at validation points. In addition to the improved performances, the inputs for the dmSoil approach are easy to prepare, and the approach itself is simple to deploy. It provides an effective way to derive better soil property information from soil category maps for hydrological modelling. Copyright © 2014 John Wiley & Sons, Ltd.     

A summary of sulfur dioxide emission rate measuremnts from Guatemalan volcanoes

Measurements of the sulfur dioxide (SO₂) emission rate from three Guatemalan volcanoes provide data which are consistent with theoretical and laboratory studies of eruptive and shallow magma chamber processes. In particular, unerupted magma makes a major contribution to the measured SO₂ emission rates at Santiaguito, a continuously erupting dacitic volcanic dome. Varying shallow magma convection rates can explain the variations in SO₂ emission rates at Santiaguito. At Fuego, a basaltic volcano currently in repose, SO₂ emission rate measurements are consistent with a high level magma body that is crystallizing and releasing volatiles. At Pacaya, a continuously erupting basaltic volcano, recent SO₂ emission rate measurements support laboratory simulation studies of strombolian eruptions; these studies indicate that the majority of gas escapes during eruptions and little gas escapes between eruptions.Average SO₂ emission rates over the last 20 years for Santiaguito, Fuego and Pacaya are 80, 160 and 260 Mg/d, respectively. On a global scale, these three volcanoes account for 1% of the annual global volcanic output of SO₂. Santiaguito and Pacaya, together, emit 6% of the total annual SO₂ emitted by continuously erupting volcanoes.Even though SO₂ measurements at these volcanoes have been made infrequently and by different investigators, the collective data help to establish a useful baseline by which to judge future changes. A more complete record of SO₂ emission rates from these volcanoes could lead to a better understanding of their eruption mechanisms and reduce the impact of their future eruptions on Guatemalan society.     

Modeling rhamnolipids production by Pseudomonas aeruginosa from immiscible carbon source in a batch system

A mathematical model to predict the rhamnolipids production by Pseudomonas aeruginosa from oleic acid in a two phase liquid-liquid batch reaction system, was developed in this study. The model was based on two theoretical assumptions: 1) the convective oleic acid mass transfer is coupled to a bioreaction in the aqueous liquid bulk, and 2) the volume of the immiscible oleic acid drops and the saturation concentration at the interface are a function of rhamnolipids production. The model was able to accurately predict the experimental growth of the Pseudomonas aeruginosa strain, and the rhamnolipids production data with oleic acid as carbon source. This mathematical approach indicated a high correspondence between the saturation dimensionless profiles of oleic acid at the interface and the experimental profiles of surface tension difference. This modeling approach may constitute a useful tool in the design and scaling-up of bioreactors applied to the production of biosurfactants with immiscible carbon sources.     

Geochronology of the Xihuashan Tungsten Deposit in Southeastern China: Constraints from Re–Os and U–Pb Dating

Xihuashan tungsten deposit is one of the earliest explored tungsten deposits in southeastern China. It is a vein type deposit genetically associated with the Xihuashan granite pluton. Here we report new dating and zircon geochemistry results. Re–Os isotopic dating for molybdenite intergrowth with wolframite in the oldest generation of the Xihuashan pluton yielded an isochron age of 157.0 ± 2.5 Ma (2σ). Zircon U–Pb laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) dating shows that the pluton crystallized at 155.7 ± 2.2 Ma (2σ). This age is similar to the molybdenite Re–Os age for the ore deposit within error. This, together with published data, suggests that the major W(Mo)‐Sn mineralization occurred between 160–150 Ma in southeastern China. These deposits constitute a major part of the magmatic‐metallogenic belt of eastern Nanlin. The lower Re content in molybdenite of the Xihuashan tungsten deposit shows crustal origin for the ore‐forming material. The limited direct contributions from the subducting slab for the tungsten mineralization in the Nanling region suggest a change of the style of the paleo‐Pacific plate beneath southeastern China.     

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.