基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

Assessing the Comparability of Ammonium,Nitrate and Sulfate Concentrations Measured by Three Air Quality Monitoring Networks

Airborne fine particulate matter across the United States is monitored by different networks, the three prevalent ones presently being the Clean Air Status and Trend Network (CASTNet), the Interagency Monitoring of PROtected Visual Environment Network (IMPROVE) and the Speciation and Trend Network (STN). If combined, these three networks provide speciated fine particulate data at several hundred locations throughout the United States. Yet, differences in sampling protocols and samples handling may not allow their joint use. With these concerns in mind, the objective of this study is to assess the spatial and temporal comparability of the sulfate, nitrate and ammonium concentrations reported by each of these networks. One of the major differences between networks is the sampling frequency they adopted. While CASTNet measures pollution levels on seven-day integrated samples, STN and IMPROVE data pertain to 24-hour samples collected every three days. STN and IMPROVE data therefore exhibit considerably more short-term variability than their CASTNet counterpart. We show that, despite their apparent incongruity, averaging the data with a window size of four to six weeks is sufficient to remove the effects of differences in sampling frequency and duration and allow meaningful comparison of the signals reported by the three networks of concern. After averaging, all the sulfate and, to a lesser degree, ammonium concentrations reported are fairly similar. Nitrate concentrations, on the other hand, are still divergent. We speculate that this divergence originates from the different types of filters used to collect particulate nitrate. Finally, using a rotated principal component technique (RPCA), we determined the number and the geographical organization of the significant temporal modes of variation (clusters) detected by each network for the three pollutants of interest. For sulfate and ammonium, the clusters’ geographical boundaries established for each network and the modes of variations within each cluster seem to correspond. RPCA erformed on nitrate concentrations revealed that, for the CASTNet and IMPROVE networks, the modes of variation do not correspond to unified geographical regions but are found more sporadically. For STN, the clustered areas are unified and easily delineable. We conclude that the possibility of jointly using the data collected by CASTNet, IMPROVE and STN has to be weighed pollutant by pollutant. While sulfate and ammonium data show some potential for joint use, at this point, combining the nitrate data from these monitoring networks may not be a judicious choice.     

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

Diagenetic paths in the margin of a Triassic Basin: NW zone of the Iberian Chain, Spain

Buntsandstein deposits generated in a slowly subsiding basin on the western margin of the Iberian Chain are represented by a stratigraphic succession of fluvial deposits less than 100 m thick (conglomerates, sandstones, and shales). Diagenetic processes in sandstones can be grouped as eodiagenetic, mesodiagenetic, and telodiagenetic. Eodiagenesis can be associated with Muschelkalk, Keuper, and probably early Jurassic times. Mesodiagenesis is probably related to Jurassic times. Diagenetic chemical reactions suggest a maximum burial less than 1.5 km and low temperatures (<120°C). Patterns of porosity reduction by compaction and cementation suggest four diagenetic stages: (1) Loss of primary porosity by early mechanical compaction; (2) early cementation (K-feldspar and dolomite); (3) dissolution of cements; and (4) framework collapse by re-compaction. These stages are manifested by the presence of two types of sandstone. Type I sandstones present high intergranular volume (mean, 30%). Type II sandstones are characterized by high compactional porosity loss and exhibit low values of intergranular volume (mean, 16.9%). Type II sandstones are associated with the dissolution of cement and later re-compaction of type I sandstones. An intermediate telodiagenetic phase is deduced and related to the sharp unconformity between Lower Cretaceous sediments and the underlying sediments. This suggests that a mechanically unstable framework collapsed during the Cretaceous, generating type II sandstones. The analyzed diagenetic paths have a wide applicability on similar marginal areas of rift basins.     

改进的能量守恒方法及其在CHAMP重力场恢复中的应用

An efficient method for gravity field determination from CHAMP orbits and accelerometer data is referred to as the energy balance approach. A new CHAMP gravity field recovery strategy based on the improved energy balance approach IS developed in this paper. The method simultaneously solves the spherical harmonic coefficients, daily Integration constant, scale and bias parameters. Two 60 degree and order gravitational potential models, XISM-CHAMPO1S from the classical energy balance approach, and XISM-CHAMPO2S from the improved energy balance, are determined using about one year＇s worth of CHAMP kinematic orbits from TUM and accelerometer data from GFZ. Comparisons among XISM-CHAMPO1S, XISM-CHAMPO2S, EIGEN-CGO3C, EIGEN-CHAMPO3S, EIGEN2, ENIGNIS and EGM96 are made. The results show that the XISM-CHAMPO2S model is more accurate than EGM96, EIGENIS, EIGEN2 and XISM-CHAMPO1S at the same degree and order, and has almost the same accuracy as EIGEN-CHAMPO3S.     

Building damage in Dujiangyan during Wenchuan Earthquake

A field damage survey of 1,005 buildings damaged by the Wenchuan Earthquake in Dujiangyan City was carried out and the resulting data was analyzed using the statistical method. It is shown that buildings that were seismically designed achieved the desired seismic fortification target; they sustained less damage than the non-seismically designed buildings. Among the seismically designed buildings investigated, RC frame buildings performed the best in terms of seismic resistance. Masonry buildings with a ground story of RC frame structure were the second best, and masonry buildings performed the worst. Considering building height, multistory buildings sustained more severe damage than high-rise buildings and 2- and 3-story buildings. Compared to residential buildings, public buildings, such as schools and hospitals, suffered more severe damage.     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.