Free vibration of semisubmersibles: A parametric study

Like any other engineering structure, the dynamic aspects of semisubmersible offshore platforms require serious consideration. The free vibrations of the semisubmersible structures have been investigated in the present work, in which the effect of the variation of the length, draft and hull spacings on the natural frequencies and mode shapes has been studied and the nature of the variations and their reasons have been discussed.     

Evidence for gas accumulation associated with diapirism and gas hydrates at the head of the Cape Fear Slide

Single-channel seismic reflection profiles show evidence for areas of significant gas accumulation at the head of the Cape Fear Slide on the continental rise off North Carolina. Gas accumulation appears to occur beneath a gas hydrate seal in landward-dipping strata and in domed strata associated with diapirism. In addition, gas venting may have occurred near diapirs located at the head of the slide.     

Spatial variability in the primary productivity in the East China Sea and its adjacent waters

Primary productivity in the East China Sea and its adjacent area was measured by the¹³C tracer method during winter, summer and fall in 1993 and 1994. The depth-integrated primary productivity in the Kuroshio Current ranged from 220 to 350 mgC m⁻²d⁻¹, and showed little seasonal variability. High primary productivity (above 570 mgC m⁻²d⁻¹) was measured at the center of the continental shelf throughout the observation period. The productivity at the station nearest to the Changjiang estuary exhibited a distinctive seasonal change from 68 to 1,500 mgC m⁻²d⁻¹. Depth-integrated primary productivity was 2.7 times higher in the shelf area than the rates at the Kuroshio Current. High chlorophyll-a specific productivity (mgC mgChl.-a⁻²d⁻¹) throughout the euphotic zone was mainly found in the shelf area rather than off-shelf area, probably due to higher nutrient availability and higher activity of phytoplankton at the subsurface layer in the shelf area.     

Developing a Marine Information System by Integrating Existing Ocean Models Using Object-Oriented Technology

Information systems developed for different applications within the environmental domain have common characteristics, which can potentially be abstracted for sharing and reuse of design and software modules. This article presents an approach to designing for reuse by abstracting commonalities in the design of a Marine Information System (MIS), facilitating data management in a prototype operational monitoring, forecasting, and management system for the North Atlantic and the Nordic Seas. A detailed study of the requirements and data analysis was carried out, and Object-Oriented Technology (OOT) is employed to encapsulate abstractions and to promote reuse of code and design. This article identifies the Object-Oriented Frameworks (OOFW) required to build the MIS. It also provides guidelines to environmental scientists for restructuring legacy software and employing modern programming techniques.     

Observed foundation behaviour of concrete gravity platforms installed in the North Sea 1973–1978

Available measurements of foundation behaviour of the 13 concrete gravity platforms installed in the North Sea in the years 1973–1978 are presented. The measurements cover both the installation phase and the early part of the operation period. For the installation phase, measurements of dowel and skirt penetration resistance, base contact stresses, tilt, piping and erosion, are presented. For the operation period, the presentation includes measurements of settlements, pore water pressures, base contact stresses, permanent lateral displacements, cyclic displacements, dynamic behaviour and erosion. The measurements are used to back calculate soil properties and to evaluate the adequacy of the design procedures which have been used. The observations give valuable experience with respect to the foundation performance of offshore gravity platforms.     

A study of the subarctic boundary region in the Western North Pacific

During autumn 1968 an oceanographic investigation was conducted in the region of the Subarctic boundary between 155°E and 180°. The geostrophic flow of the upper 500 m was remarkably similar in direction; hence the salinity-minimum, Intermediate water must have the same path of flow as water at the surface. A water mass analysis revealed a decrease in the percentage of Subarctic water to the south and east, plus an increase in the homogeneity of water to the east, which supports Reid's conclusions that the salinity minimum results mainly from lateral mixing in the pycnocline in this region. Salinity at the minimum increases toward the south and east, and the density at this level also increases slightly from the western to the central Pacific, perhaps as a result of unequal vertical mixing above and below the minimum.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.     

Geopotential topography of deep levels in the Pacific Ocean

After examination of the baroclinic structure below 3000 db, recent data were used to map the geopotential topography at 1000, 1500, and 2000 db (referred to 3000 db) in the Pacific Ocean. In the high-latitude regions and in the western boundary currents, considerable relief is present at 1000 and 1500 db, and the Circumpolar Current is still well-developed at 2000 db. The geostrophic circulation inferred is very similar to the surface circulation in these areas. Neglect of the structure below 1000 db results in appreciable errors in estimates of the transport of these currents; direction of near-surface flow is properly shown, however, and computed speeds are not greatly in error. In the equatorial Pacific and central North Pacific, little relief is present, and the trends are generally unlike the surface flow.     

A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.