Avalanche risk assessment for mountain roads: a case study from Iceland

This paper presents an assessment of the avalanche hazard potential and the resulting risks on mountain roads for a 38.7-km-long section of road no 76 (Siglufjarearvegur) in northern Iceland following a regional scale approach developed in the Alps. The assessment of the individual avalanche death risk proved applicable to distinguish areas of avalanche hazard with a risk above the accepted level, which should be given priority in following detailed investigations and the planning of possible protective measures, from road sections where the avalanche death risk is low and accepted according to international practice. The cumulative individual and collective avalanche death risks in the investigated road section provide a comparable measure for assessing the avalanche hazard both within the Icelandic public road network and on an international scale. The case study on road no 76 in northern Iceland shows that a standardised regional scale risk-based approach is practical to determine, analyse and assess the avalanche hazard situation on mountain roads in Iceland and guarantees comprehensible, reproducible and comparable results as a basis for a sustainable planning of measures.     

Assessment of small-diameter shallow wells for managed aquifer recharge at a site in southern Styria,Austria

An approach to establish the recharge component of managed aquifer recharge (MAR) has recently been proposed that uses small-diameter shallow wells installed using relatively inexpensive drilling methods such as direct push. As part of further development of that approach, a generalized procedure is presented for a technical and economic assessment of the approach’s potential in comparison to other systems. Following this procedure, the use of small-diameter wells was evaluated both experimentally and numerically for a site located in southern Styria, Austria. MAR is currently done at the site using a horizontal pipe infiltration system, and system expansion has been proposed with a target rate of 12 l/s using small-diameter wells as one possible option. A short-duration single-well field recharge experiment (recharge rate 1.3–3.5 l/s) was performed (recharge by gravity only). Numerical modeling of the injection test was used to estimate hydraulic conductivity (K). Quasi-steady-state, single-well recharge simulations for different locations, as well as a long-term transient simulation, were performed using the K value calibrated from the field injection test. Results indicate that a recharge capacity of 4.1 l/s was achievable with a maximum head rise of 0.2 m at the injection well. Finally, simulations were performed for three different well fields (4, 6 and 8 wells, respectively) designed to infiltrate a target rate of 12 l/s. The experimental and numerical assessments, supported by a cost analysis of the small-diameter wells, indicate that the small-diameter wells are a viable, cost-effective recharge approach at this and other similar sites.     

<Superscript>57</Superscript>Fe Mössbauer spectroscopy,X-ray single-crystal diffractometry,and electronic structure calculations on natural alexandrite

Natural alexandrite Al₂BeO₄:Cr from Malyshevo near Terem Tschanka, Sverdlovsk, Ural, Russia, has been characterized by ⁵⁷Fe Mössbauer spectroscopy, electron microprobe, X-ray single-crystal diffractometry and by electronic structure calculations in order to determine oxidation state and location of iron. The sample contains 0.3 wt% of total iron oxide. The ⁵⁷Fe Mössbauer spectrum can be resolved into three doublets. Two of them with hyperfine parameters typical for octahedrally coordinated high-spin Fe³⁺ and Fe²⁺, respectively, are assigned to iron substituting for Al in the octahedral M2-site. The third doublet is attributed to Fe³⁺ in hematite. Electronic structure calculations in the local spin density approximation are in reasonable agreement with experimental data provided that expansion and/or distortion of the coordination octahedra are presumed upon iron substitution. The calculated hyperfine parameters of Fe³⁺ are almost identical for the M1 and M2 positions, but the calculated ligand-field splitting is by far too large for high-spin Fe³⁺ on M1.     

Uniform Permian 40Ar/39Ar detrital mica ages in the eastern Qaidam Basin (NW China): where is the source?

New single‐grain ⁴⁰Ar/³⁹Ar detrital white‐mica ages from the Lulehe section at the eastern Qaidam Basin yield uniform Permian ages between 250 ± 3 and 279 ± 3 Ma throughout the whole Cenozoic sequence. This is inconsistent with the present hinterland, which is composed of early Palaeozoic metamorphic units with subordinate early Palaeozoic and few Permian granites. The new data indicate that Permian tectonic units are likely more widespread at the north‐eastern margin of the Tibetan plateau as known at present, particularly within the Qilian Mountains. The preferred explanation is that the Qaidam block represents a rigid indenter, which indented during late Tertiary times into early Palaeozoic orogenic units. This is consistent with recent findings of a NW‐trending sinistral Permian ductile shear zone and a dextral, NW‐trending Tertiary fault system close to the north‐eastern margin of the Qaidam Basin.     

GIOVE-A initial signal analysis

In late December 2005 the GIOVE-A test satellite was launched by the European Space Agency (ESA) to secure the frequencies for the Galileo system and to provide a platform for testing the new navigation signals. We performed an initial assessment of these signals using the 30 m deep space antenna of the DLR ground station in Weilheim (Germany). The antenna gain raised the signals above the noise level, thus allowing a detailed analysis even without knowledge of the ranging codes. The present paper covers the analysis of the L1/E1 signals, which includes a discussion of the spectrum, the time domain signal and a decoding of the spreading codes for the Open Service.     

Instability structures, synsedimentary faults and turbidites, witnesses of a Liassic seismotectonic activity in the Dauphiné Zone (French Alps): A case example in the Lower Pliensbachian at Saint-Michel-en-Beaumont

Instability structures, synsedimentary faults and turbidites have been studied in the Lower Pliensbachian succession of Saint-Michel-en-Beaumont, belonging to the Taillefer block, an ancient half-graben emplaced during the Liassic Tethyan rifting. Geometrical and mechanical analyses demonstrate that the instability structures occurred thanks to movements along spineless synsedimentary normal faults, when the turbiditic and limestone layers were already case-hardened and partly fractured by tension gashes even when the mudstones were still unlithified. Both the tension gashes and the synsedimentary faults are homogeneous in strike with the major regional faults and are in good agreement with the regional direction of extension for this period. The characters of the turbiditic beds, with erosive base, graded bedding, and incomplete Bouma sequence, are in favour of a seismic origin. Instability structures, spineless synsedimentary faults and turbiditic inflows are thus considered as seismites and interpreted as the result of high seismicity periods including some events with M > 5 in the general extensive ambiance of the Liassic Tethyan rifting. The analysis of the geometrical relationships between all these sedimentary features allows to distinguish the successive stage of occurrence of an instability structure, from the sedimentation of alternating marls and limestones, and sudden turbiditic inflows, then early case-hardening of the turbidites, until the important seismotectonic event generating the spineless normal faults, themselves triggering the fall of indurated blocks and locally the forming of breccias. The Ornon Fault, which constitutes the border of the Taillefer block, 15 km eastward, played a major role during the Liassic sedimentation and may represent the major seismic fault related to the seismites occurrence in the Beaumont basin.     

Variscan ore formation and metamorphism at the Felbertal scheelite deposit (Austria): constraining tungsten mineralisation from Re–Os dating of molybdenite

The Felbertal scheelite deposit in the Eastern Alps has been regarded as the type locality for stratabound scheelite deposits. It is hosted by a Cambro-Ordovician metavolcanic arc sequence with minor Variscan granitoids (∼ 340 Ma) in the central Tauern Window. Re–Os model ages for molybdenite from the Felbertal tungsten deposit range between ∼ 358 and ∼ 336 Ma and record several pulses of magmatic-hydrothermal-metamorphic molybdenite formation. Molybdenite ages from the K2 orebody, a scheelite-rich quartz mylonite in the Western ore field, indicate that both mineralisation and mylonite are Variscan in age and suggest that the shear zone was active for ∼ 20 million years. Early stage tungsten mineralisation (Scheelite 1) in quartzitic ores in the Eastern ore field, which is free of molybdenite, yielded very low to near blank levels of Re and Os and thus could not be dated. However, molybdenite from scheelite–quartz stringers, previously interpreted as a feeder stockwork to quartzitic scheelite ore of presumed Cambrian age, yielded Variscan Re–Os ages of ∼ 342 and ∼ 337 Ma. Dating of molybdenite contained in scheelite ores thus far provides no indication of a Cambrian component to the tungsten mineralisation. Our data are consistent with a model of either granite intrusion-related ore formation and coeval metamorphic overprint during the Early Carboniferous or, alternatively, molybdenite formation may be exclusively attributed to Variscan metamorphism (see Stein 2006).     

A Reanalysis and Reinterpretation of Geodetic and Geological Evidence of Glacial-Isostatic Adjustment in the Churchill Region, Hudson Bay

We review the historical, geological, tide-gauge, GPS and gravimetric evidence advanced in favour of, or against, continuing land uplift around Hudson Bay, Canada. We also reanalyse the tide-gauge and GPS data for Churchill using longer time series than those available to previous investigators. The dependence of the mean rate of relative sea-level change obtained from the tide-gauge record on the length and mid-epoch of the observation interval considered is investigated by means of a newly developed linear-trend analysis diagram. For studying the shorter-period variability of the tide-gauge record, the wavelet transform is used. The mean rate of land uplift obtained from GPS is based on a new analysis using IGS solutions of GFZ. To include the post-glacial land uplift, sea-level indicators from the Churchill region representing the relative sea-level history during the past 8000 years are also used. Finally, the values of the four observables are jointly inverted in terms of mantle viscosity. The optimum values are ~3.2 × 10²⁰ Pa s and ~1.6 × 10²² Pa s for the upper- and lower-mantle viscosities, respectively.     

A multimodel comparison of centennial Atlantic meridional overturning circulation variability

A mechanism contributing to centennial variability of the Atlantic Meridional Overturning Circulation (AMOC) is tested with multi-millennial control simulations of several coupled general circulation models (CGCMs). These are a substantially extended integration of the 3rd Hadley Centre Coupled Climate Model (HadCM3), the Kiel Climate Model (KCM), and the Max Plank Institute Earth System Model (MPI-ESM). Significant AMOC variability on time scales of around 100?years is simulated in these models. The centennial mechanism links changes in the strength of the AMOC with oceanic salinities and surface temperatures, and atmospheric phenomena such as the Intertropical Convergence Zone (ITCZ). 2 of the 3 models reproduce all aspects of the mechanism, with the third (MPI-ESM) reproducing most of them. A comparison with a high resolution paleo-proxy for Sea Surface Temperatures (SSTs) north of Iceland over the last 4,000?years, also linked to the ITCZ, suggests that elements of this mechanism may also be detectable in the real world.     

Variability of Fram Strait sea ice export: causes, impacts and feedbacks in a coupled climate model

Analyses of a 500-year control integration of the global coupled atmosphere–sea ice–ocean model ECHAM5.0/MPI-OM show a high variability in the ice export through Fram Strait on interannual to decadal timescales. This variability is mainly determined by variations in the sea level pressure gradient across Fram Strait and thus geostrophic wind stress. Ice thickness anomalies, formed at the Siberian coast and in the Chukchi Sea, propagate across the Arctic to Fram Strait and contribute to the variability of the ice export on a timescale of about 9 years. Large anomalies of the ice export through Fram Strait cause fresh water signals, which reach the Labrador Sea after 1–2 years and lead to significant changes in the deep convection. The associated anomalies in ice cover and ocean heat release have a significant impact on air temperature in the Labrador Sea and on the large-scale atmospheric circulation. This affects the sea ice transport and distribution in the Arctic again. Sensitivity studies, simulating the effect of large ice exports through Fram Strait, show that the isolated effect of a prescribed ice/fresh water anomaly is very important for the climate variability in the Labrador Sea. Thus, the ice export through Fram Strait can be used for predictability of Labrador Sea climate up to 2 years in advance.