Applications of particle-tracking techniques to bank infiltration: a case study from El Paso,Texas, USA

This paper presents results of a small scale study that utilized particle-tracking techniques to evaluate transport of river water through an alluvial aquifer in a bank infiltration testing site in El Paso, Texas, USA. The particle-tracking survey was used to better define filtration parameters. Several simulations were generated to allow visualization of the effects of well placement and pumping rate on flow paths, travel time, the size of the pumping influence zone, and proportion of river-derived water and groundwater mixing in the pumping well. Simulations indicate that migration of river water into the aquifer is generally slow. Most water does not arrive at the well by the end of an 18-day pumping period at 0.54 m³/min pumping rate for a well located 18 m from the river. Forty-four percent of the water pumped from the well was river water. The models provided important information needed to design appropriate sampling schedules for bank filtration practices and ensured meeting adequate soil-retention times. The pumping rate has more effect on river water travel time than the location of the pumping well from the river. The examples presented in this paper indicate that operating the pumping well at a doubled distance from the river increased the time required for the water to travel to the well, but did not greatly change the capture zone.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

Assessment of small-diameter shallow wells for managed aquifer recharge at a site in southern Styria,Austria

An approach to establish the recharge component of managed aquifer recharge (MAR) has recently been proposed that uses small-diameter shallow wells installed using relatively inexpensive drilling methods such as direct push. As part of further development of that approach, a generalized procedure is presented for a technical and economic assessment of the approach’s potential in comparison to other systems. Following this procedure, the use of small-diameter wells was evaluated both experimentally and numerically for a site located in southern Styria, Austria. MAR is currently done at the site using a horizontal pipe infiltration system, and system expansion has been proposed with a target rate of 12 l/s using small-diameter wells as one possible option. A short-duration single-well field recharge experiment (recharge rate 1.3–3.5 l/s) was performed (recharge by gravity only). Numerical modeling of the injection test was used to estimate hydraulic conductivity (K). Quasi-steady-state, single-well recharge simulations for different locations, as well as a long-term transient simulation, were performed using the K value calibrated from the field injection test. Results indicate that a recharge capacity of 4.1 l/s was achievable with a maximum head rise of 0.2 m at the injection well. Finally, simulations were performed for three different well fields (4, 6 and 8 wells, respectively) designed to infiltrate a target rate of 12 l/s. The experimental and numerical assessments, supported by a cost analysis of the small-diameter wells, indicate that the small-diameter wells are a viable, cost-effective recharge approach at this and other similar sites.     

The progress on remote sensing technology in identifying tropical forest degradation: a synthesis of the present knowledge and future perspectives

Since the launch of the first satellite in 1972, ecologists have been equipped with new tools to address the degradation of tropical forests, previously limited by field-based methods. This article is a review of the state of remote sensing technology in characterizing the degradation of tropical forest. The factors responsible for the structural and functional degradation of the tropical forest and its likely impacts are described in view of generating remote sensing based inputs. In order to assess the degradation and utility of geo-informatics tools, 32 parameters are identified. The research developments at different levels of information extraction from the historic to recent periods are elaborated, and future challenges are predicted. The article concludes that an additional momentum of research is required to answer many unresolved questions of tropical forest degradation.     

On Factors Controlling Air–Water Gas Exchange in a Large Tidal River

Air–water gas exchange is an important process in aquatic systems, including tidal rivers and estuaries. While there are now reliable and routine methods for determining gas exchange over a range of temporal and spatial scales in the ocean and these measurements have resulted in widely used wind speed parameterizations to calculate air–sea gas exchange, the same has not been true for coastal inland waterways. Some studies have suggested that this difference is methodological, while others point to the existence of additional drivers for gas exchange besides wind in rivers and estuaries. Here, we present gas transfer velocities measured in the tidal Hudson River with a method widely used in oceanic studies, the ³He/SF₆ dual tracer technique. Airside and waterside forcings were determined with an anemometer and an acoustic Doppler current profiler, respectively. The results confirm that wind is the dominant driver of gas exchange in the tidal Hudson River, with negligible contribution from bottom-generated turbulence. Furthermore, a parameterization between wind speed and gas exchange developed for the ocean is able to predict gas exchange in this environment with high accuracy. It is hoped that by transferring methodology used in oceanic studies to rivers and estuaries, robust data can be obtained that will eventually allow development of widely applicable relationships between easily measured environmental variables and gas exchange in tidal inland waters.     

Fe–Cu deposits in the Kangdian region,SW China: a Proterozoic IOCG (iron-oxide–copper–gold) metallogenic province

Numerous Fe–Cu deposits are hosted in the late Paleoproterozoic Dongchuan and Dahongshan Groups in the Kangdian region, SW China. The Dongchuan Group is composed of siltstone, slate, and dolostone with minor volcanic rocks, whereas the Dahongshan Group has undergone lower amphibolite facies metamorphism and consists of quartz mica-schist, albitite, quartzite, marble and amphibolite with local migmatite. Deposits in the Dongchuan Group are commonly localized in the cores of anticlines, in fault bends and intersections, and at lithological contacts. Orebodies are closely associated with breccias, which are locally derived from the host rocks. Fe-oxides (magnetite and/or hematite) and Cu-sulfides (chalcopyrite, bornite) form disseminated, vein-like and massive ores, and typically fill open spaces in the host rocks. The deposits have extensive albite alteration and local K-feldspar alteration overprinted by quartz, carbonate, sericite and chlorite. Deposits in the Dahongshan Group have orebodies sub-parellel to stratification and show crude stratal partitioning of metals. Fe-oxide ores occur as massive and/or banded replacements within the breccia pipes, whereas Cu-sulfide ores occur predominantly as disseminations and veinlets within mica schists and massive magnetite ores. Ore textures suggest that Cu-sulfides formed somewhat later than Fe-oxides, but are possibly within the same mineralization event. Both ore minerals predated regional Neoproterozoic metamorphism. Both orebodies and host rocks have undergone extensive alteration of albite, scapolite, amphibole, biotite, sericite and chlorite. Silica and carbonate alterations are also widespread. Ore-hosting strata have a LA-ICP-MS zircon U–Pb age of 1681 ± 13 Ma, and a dolerite dyke cutting the Fe-oxide orebodies has an age of 1659 ± 16 Ma. Thus, the mineralization age of the Dahongshan deposit is constrained at between the two. All ores from the two groups have high Fe and low Ti, with variable Cu contents. Locally they are rich in Mo, Co, V, and REE, but all are poor in Pb and Zn. Sulfides from the Fe–Cu deposits have δ³⁴S values mostly in the range of +2 to +6 per mil, suggesting a mix of several sources due to large-scale leaching of the strata with the involvement of evaporites. Isotopic dating and field relationships suggest that these deposits formed in the late Paleoproterozoic. Ore textures, mineralogy and alteration characteristics are typical of IOCG-type deposits and thus define a major IOCG metallogenic province with significant implications for future exploration.     

Assessment of groundwater vulnerability to pollution in Dire Dawa,Ethiopia using DRASTIC

Assessment of groundwater vulnerability to pollution is an effective tool for the delineation of groundwater protection zones. DRASTIC approach was used to determine vulnerability zones in Dire Dawa groundwater basin, a semiarid region of Ethiopia. Maps of the seven DRASTIC parameters were prepared. GIS-ArcView was used for mapping and performing weighted-overlay analysis. The result of the analysis indicated that eastern part of the study area, in which Dire Dawa town is located, is highly vulnerable. A low aquifer vulnerability class was determined for the western portion of the study area as a result of greater groundwater depths, higher relative soil-clay content, and relatively low recharge rates for this area. The area between the two zones is of medium vulnerability. Observed nitrate concentrations in boreholes are in accordance with the vulnerability map. Some of the boreholes in the Sabian well field (Dire Dawa area) already deliver groundwater with nitrate levels significantly exceeding health standards set by the World Health Organization, while boreholes in the western part (low vulnerability zone) contain almost no nitrate. The result of this study is useful for risk assessments and for the development of effective groundwater management strategies for this region and others like it.     

The socioeconomic impacts of nuclear generating stations: An analysis of the Rancho Seco and peach bottom facilities

This paper presents the results of a comparative analysis of the socioeconomic impacts of the construction and operation of two nuclear generating stations. Although the construction of nuclear power plants is typically a multiyear process utilizing large numbers of workers and requiring large expenditures for equipment and materials, the socioeconomic changes in the areas in which the plants are located were small and temporary. The extent and size of the changes were found to be related to the size of the work force residing in the local area, the magnitude of local utility and contractor purchases, the amount of tax payments resulting from the plant, and the level of involvement of area groups over plant-related issues.     

Trace element zoning in pyroxenes from ODP Hole 735B gabbros: diffusive exchange or synkinematic crystal fractionation?

Major and trace element profiles of clinopyroxene grains in oceanic gabbros from ODP Hole 735B have been investigated by a combined in situ analytical study with ion probe, and electron microprobe. In contrast to the homogeneous major element compositions, trace elements (REE, Y, Cr, Sr, and Zr) show continuous core to rim zoning profiles. The observed trace element systematics in clinopyroxene cannot be explained by a simple diffusive exchange between melts and gabbros along grain boundaries. A simultaneous modification of the melt composition is required to generate the zoning, although Rayleigh fractional crystallization modelling could mimic the general shape of the profiles. Simultaneous metasomatism between the cumulate crystal and the porous melt during crystal accumulation is the most likely process to explain the zoning. Deformation during solidification of the crystal mush could have caused squeezing out of the incompatible element enriched residual melts (interstitial liquid). Migration of the melt along grain boundaries might carry these melt out of the system. This process named as synkinematic differentiation or differentiation by deformation (Natland and Dick in J Volcanol Geotherm Res 110(3–4):191–233, 2001) may act as an important magma evolution mechanism in the oceanic crust, at least at slow-spreading ridges.     

Post-drilling destabilization of temperature profile in borehole Yaxcopoil-1, Mexico

As part of the International Continental Scientific Drilling Program (ICDP), the 1.5-km-deep borehole Yaxcopoil-1, located in the Chixculub meteor impact structure in Mexico, has undergone further study after drilling operations ceased. Temperature logs were repeated ten times at intervals 0.3–0.8, 15, 24 and 34 months after borehole shut-in. The logs bear a distinct signature of transient heat transfer by groundwater flow manifested by a gradual distortion of the linear temperature profile when a cold wave of 0.8–1.6°C amplitude was detected propagating downward from 145 to 312 m at a rate of 4–6 m/month. To understand the nature of this moving anomaly, a 20-day monitoring of the cold wave was carried out at a depth of 307 m that showed further cooling of 0.6°C during the first 16 days of the passage followed by temperature stabilisation. As an explanation of this unusual phenomenon, a theory is proposed, whereby the drilling mud has accumulated within the overlying and cooler highly porous and permeable karstic rocks during the drilling and migrates downward. The observed migration rate suggests a permeability higher than 10^?11 m². This indicates a high vulnerability to contamination of the only freshwater aquifer in the Yucatan region.