阿尔泰南缘东段变形岩石磁组构分析

磁组构是指岩石磁化率的各向异性,磁组构方法已经被广泛应用于构造变形分析。阿尔泰南缘东段地区岩石磁组构特征是磁各向异性度P值大,反映本区总体韧性剪切变形强烈。萨尔布拉克—科克萨依脆性劈理化带和玛因鄂博韧性剪压构造带的E>0占优势,磁面理发育,部分样品磁线理发育,反映变形以压扁变形为主,主压应力方向为NE(NEE)向,伴随弱的左行剪切;达拉维孜—阿热勒托别韧性流变构造带和锡泊渡—富蕴深层次变晶糜棱岩带E>0和E<0均存在,磁面理和磁线理均发育,反映以剪切变形为主;其中达拉维孜—阿热勒托别构造带主压应力方向为NE(NEE)向,为左行剪切,而锡泊渡—富蕴构造带主压应力方向为SN向,为右行剪切。在达拉维孜—阿热勒托别构造带中的哈腊苏铜矿和卡拉先格尔—老山口一带一些叠加蚀变矿化的强变形岩石的P值明显减小,说明在韧性变形之后发生过矿化热液作用导致磁化率各向异性发生了均一化。结合区域构造分析,可以认为萨尔布拉克—科克萨依构造带、达拉维孜—阿热勒托别构造带和玛因鄂博构造带构成一个完整的板块碰撞聚合带,而锡泊渡—富蕴构造带可能为在古生代期间被强烈改造的具有前震旦纪结晶基底的微大陆的残留(或断片)。     

The burial efficiency of organic carbon in the sediments of Lake Kinneret

Even though lake sediments constitute a significant long-term carbon sink, studies on the regulation of carbon burial in lakes sediments have, to date, been surprisingly few. We investigated to what degree the organic carbon (OC) being deposited onto the bottom of Lake Kinneret (Israel) is buried in the sediment at four different sites with varying degrees of oxygenation and varying supply of allochthonous particles from the River Jordan. For estimation of the OC burial efficiency (OC BE), i.e., the ratio between buried and deposited OC, we calculated OC burial from dated sediment cores, and calculated OC deposition using three different approaches. Calculation of OC deposition from sediment trap-derived mass deposition rates multiplied with the OC content of surface sediment yielded OC BE values that were at odds with published values for sediments dominated by autochthonous OC sources. Calculation via sediment trap data on organic matter flux collected within the Lake Kinneret monitoring program, as well as calculation of OC deposition as the sum of OC burial plus OC mineralization, returned fairly congruent estimates of OC BE (range 10–41%), but only if the sediment trap data were corrected for the proportion of resuspended particles in the traps. Differences in OC BE between sites were small, indicating that OC source (common to all sites) was a more important regulator of OC BE in Lake Kinneret than oxygen exposure or mineral particles characteristics.     

大城市近郊农地流转的时空特征及影响因素

以武汉市蔡甸区为例,结合多源、多时段的村级农地流转数据,采用探索性空间分析和多元线性回归分析方法,揭示大城市近郊农地流转的时空特征及影响因素。研究发现：① 流转规模呈跨越式增长,经历快速增长和短期减速增长两个阶段,流转速度受土地政策影响较大;农地流转的空间分布由随机转向集聚,高高集聚区由主干道沿线转移至以农业为主的平原街镇,低低集聚区由不显著到集中于城镇化水平较高的街镇;② 控制自然、区位、社会经济等因素后,发现流转主体、流转用途对农地流转具有显著影响。建议清楚把握农地流转时空演化特征,合理选择流转主体和流转用途,以优化大城市近郊的人地关系,促进城乡统筹和乡村振兴。     

Effect of heat treatment on dynamic properties of selected rock types taken from the Salt Range in Pakistan

Temperature is one of the variables that influence the elasto-plastic behavior and integrity of rock outcrops. Fluctuations in temperature can trigger alteration of some of the mineral properties and impact the brittle-plastic transition. Initiation and propagation of thermally induced tension cracks tend to weaken most rock types. The principal goal of this study was to anticipate impacts of thermal stress-strain cycles on the dynamic response of representative rock units exposed in the Khewra Gorge of the Salt Range Punjab of Pakistan. Ten types of sedimentary rock units were sampled, including marl, dolomite, three types of limestone, and five different sandstones exhibiting varying characteristics in outcrop. Boulder specimens were collected from the field and transported to the laboratory to prepare 50 drill cores that could be subjected to thermal cycling between 50 and 200 °C in increments of 50 °C. Room temperature core samples were tested using an Erudite resonance frequency meter to measure their Q-factors and the resonance frequency (F_r) at an applied loading frequency of 7 KHz with 0.01 V output voltage. Results suggest that thermal cycling tends to reduce the dynamic Young’s modulus (E_d) and Q-factor. Other parameters, such as damping ratio (ξ), specific damping capacity (Ψ), and loss factor (?) appeared to increase with increasing temperature cycles, likely as a result of developing thermally induced tensile fractures. The resultant values of the null hypothesis (t-critical and t-stats) suggests that the null hypothesis can be discarded because there was no observable difference between the measured and expected values for the cores tested. The observations and data emanating from this study might be useful in designing low-level radioactive waste landfills, nuclear waste repositories, and deep underground excavations where the increased temperature could alter the mechanical behavior of the parent rock mass.     

Assessment of the reliability of supervised classifications of Landsat-7, ASTER,and SPOT-5 multispectral data in rock unit discriminations of Jabal Daf-Wadi Fatima area,Saudi Arabia

Multispectral, multiresolution remotely sensed data were processed to emphasize geological interpretation of Jabal Daf-Wadi Fatima area. The investigated area is situated in the central western part of Saudi Arabia and geologically consists of igneous and metamorphosed rocks overlain by sedimentary sequence belonging to the Arabian-Nubian Shield. Three sets of digital satellite data, Landsat-7 ETM+, ASTER, and SPOT-5, were used in this study. The application of image processing techniques enables to identify and delineate the lithologic units and the structural features of the study area. The results of this study indicate that the confusion matrix of the three maximum likelihood supervised classifications of the three datasets shows that the Landsat ETM+ bands scored the best degree of average and overall accuracy (77 and 78%, respectively). This classification distinguishes most of the rock units for mapping in the investigated area. The supervised classification of ASTER and SPOT bands has lower degrees of accuracy than the classified Landsat data. The supervised classification of SPOT bands has a degree of average and overall accuracy of 66 and 67%, respectively, but it is the best for distinguishing the spectral signatures of the different members of Fatima Formation (lower, middle, and upper members). The statistical analyses of the confusion matrices of classifications and the interpretation of the produced classified thematic maps revealed that the classification accuracy does not necessary depend on the spatial resolution of satellite data. The data of the highest spatial resolution such as SPOT data are also very useful in emphasizing and classifying the rock units of a small outcrop area. The detailed geological map of Jabal Daf-Wadi Fatima area is interpreted in this work from supervised classified images of different resolutions as well as the structure map of this area. This study shows that it is preferable to use the supervised classifications of multiresolution data for rock unit discrimination in detailed field mapping.     

Structural properties of Urfa stone doped with erbium oxide

In this study, we investigated the structural properties of Urfa stone (US) doped with erbium oxide (Er₂O₃). Solid US was powdered by using an agate mortar, and its elemental composition was determined using inductive coupling plasma (ICP) methods. Varying amounts of Er₂O₃ (5, 10, 20, 30, and 40%) were added as a dopant to the US powder using mechanical alloying methods. The resultant samples were sintered at 1000 °C for 1 h. The structural properties of the Er₂O₃-doped US samples were subsequently investigated using X-ray diffraction (XRD), Fourier-transform infrared spectrometry (FTIR), and photoluminescence methods. Results from the XRD analysis of the Er₂O₃-doped US powder indicated two crystalline phases: (1) calcium oxide (CaO) or lime and (2) Er₂O₃. After the samples were sintered at 1000 °C, CaO, Er₂O₃, calcium carbonate (CaCO₃), and mixed crystalline phases were observed. Results from the FTIR analysis of the Er₂O₃-doped US samples indicated absorption bands at 711.91, 872.08, and 1396.87 cm^?1 in the spectra. Finally, photoluminescence analysis results indicated a shift in the emission and excitation bands to longer and shorter wavelengths, respectively, in the solid state (non-aqueous media) US-Er complex.     

A practical approach for the interpretation of flowing well tests

Flowing well test is one of the tools employed to identify transmissivity and storage coefficient of a confined aquifer where the potentiometric surface is located above the ground surface, so that the groundwater flows naturally from the well without pumping. During a flowing well test, constant hydraulic head is preserved at the well while the discharge from the well decreases with time and the temporal variation of discharge provides significant information about aquifer characteristics. In this study, a simple and straightforward approach is presented as an alternative to a number of graphical or error minimization-based techniques available in the literature for analyzing data from flowing well tests. The proposed method employs a polynomial regression equation to establish a link between observed discharge and the theoretical dimensionless discharge that is introduced in the analytical solution, so as to retrieve the aquifer parameters. The method is tested with a vast number of synthetically generated data sets as well as a real data set reported in the literature. Besides its simplicity, the present method is seen to produce highly accurate and reliable estimations.     

Geospatial assessment of soil erosion intensity and sediment yield: a case study of Potohar Region,Pakistan

Estimation of spatial extent of soil erosion, one of the most serious forms of land degradation, is critical because soil erosion has serious implications on soil fertility, water ecosystem, crop productivity and landscape beauty. The primary objective of the current study was to assess and map the soil erosion intensity and sedimentation yield of Potohar region of Pakistan. Potohar is the rainfed region with truncated and complex topography lying at the top of the Indus Basin, the world’s largest irrigation networks of canals and barrages. Spatially explicit Revised Universal Soil Loss Equation (RUSLE) Model integrated with Remote Sensing-GIS techniques was used for detecting/mapping of erosion prone areas and quantification of soil losses. The results show that the Potohar region is highly susceptible to soil erosion with an average annual soil loss of 19 tons ha^?1 year^?1 of which the maximum erosion (70–208 tons ha^?1 year^?1) was near the river channels and hilly areas. The sediment yield due to the erosion is as high as 148 tons ha^?1 year^?1 with an average of 4.3 tons ha^?1 year^?1. It was found that 2.06% of the total area falls under severe soil erosion, 13.34% under high erosion, 15.35% under moderate soil erosion while 69.25% of the area lies in the low (tolerable) soil erosion. Chakwal and Jhelum districts of the region are seriously affected by erosion owing to their topography and soil properties. The information generated in this study is a step forward towards proper planning and implementation of strategies to control the erosion and for protection of natural resources. It is, hence, necessary that suitable water harvesting structures be made to control water to prevent soil erosion and provision of water in the lean season in this region. Tree plantation and other erosion control practices such as strip cropping can also minimize soil erosion in this region.     

Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi,China

The Qingling–Bashan (QB) mountain region in southern Shaanxi mainly consists of strongly compressive zones from east to west, with tight folds and compressive fractures. There is a wide distribution of soft rocks of various types, such as phyllite and slate, accompanied by complex geological structures. Ironically, tunnel construction in these difficult grounds with complicated geological conditions embraces a high risk of extreme deformation due to various unpredictable reasons, which can frequently cause collapse and result in budget overruns during the construction period. Therefore, it is crucial to conduct effective countermeasures to eliminate or avoid such adverse impacts. This paper provides a case study on the “Yingfeng tunnel” (a tunnel constructed in soft rock consisting of a slate ground) based on a geological survey, indoor experiments and in situ monitoring. A successive rock mass deformation resulted in the tunnel lining seriously intruding into construction clearance and some other sections, even collapsing during the construction. The maximum displacement amount was 62.5 cm, while the maximum deformation speed reached as high as 34.18 mm/day. Additionally, to evaluate the construction impacts of tunnelling-induced geo-hazards, an investigation on extreme deformation was conducted. Considering the time-dependent features of the rock mass deformation, the constraint-convergence method was used to put forward applicable countermeasures in this paper. Finally, from the feedbacks of monitoring results, extreme deformation of the Yingfeng tunnel was effectively controlled.